KoFeMa

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible. Iedpfey D Tptsx Abgotf

Year of construction: 1977, condition: ready for operation (used), Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible. Itodpfxey D Tpye Abgsf

Year of construction: 1990, condition: ready for operation (used), Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible. Itsdpoy D Tqqofx Abgsf

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Itodpfxjy D Tpms Abgsf

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Itjdpfsy D Tpasx Abgef

Year of construction: 1968, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible. Itedpfx Aoy D Tn Nebgof

Condition: used, Year of construction: 1980, functionality: fully functional, runs perfectly Isdsy D Rngopfx Abgstf

Condition: good (used), functionality: fully functional, BARON MAX KL1840 Lathe Isdpfxoy D Ikfs Abgotf Distance between centers: 1,000 mm Center height: 230 mm Swing over bed: 460 mm Bed width: 350 mm Spindle nose: D1 6’’ Spindle bore: 54 mm Spindle taper: MT6 Longitudinal travel: 750 mm Vertical travel: 230 mm Motor power: 7.5 kW Spindle speed: 25 to 2,500 rpm Z & X axis motors: 5.4 Nm Coolant pump: 0.25 HP Rapid traverse Z & X: 5,000 mm/min Working feed: 1–3,500 mm/min Tailstock taper: MT4 Tailstock quill travel: 160 mm Tailstock quill diameter: 52 mm Machine dimensions: 2,100 x 1,300 x 1,600 mm – 2,500 kg VDI 8-position turret Lathe in as-new condition – 100 hours of operation

Year of construction: 1970, condition: ready for operation (used), Offered is a lead and feed screw lathe: Distance between centers: 1000mm, Center height: 250mm, Swing diameter over bed: 500mm, Speed range: 7.1-1400rpm, Extensive feed gearbox for longitudinal and cross feeds, Inspection by appointment possible Itjdpfx Asy Dgrbebgef

Year of construction: 2013, condition: ready for operation (used), Offered is a precision lathe: Distance between centers: 1500mm, Center height: 265mm, Swing diameter over bed: 530mm, Speed range: infinitely variable up to 2000rpm, Weight: approx. 2135kg, Inspection by appointment possible. Itedpey Dgq Refx Abgsf

Year of construction: 1984, operating hours: 42,591 h, condition: used, machine/vehicle number: 04054.01-807, Technical data: Distance between centers: 4000 mm Center height over flat bed: 400 mm Swing diameter over bed: 820 mm Bed width: 560 mm Carriage guideway length: 800 mm Cross slide width: 320 mm Isdpfx Absy Axzxjgjtf Top slide width: 200 mm Main spindle head: DIN 55022 size 11 Required floor space: Length: 7210 mm Width: 1815 mm

Condition: used, Year of construction: 2013, machine/vehicle number: 131501794, Additional tools Isdpjy Alb Eofx Abgotf

Year of construction: 2014, condition: ready for operation (used), Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Iedpfx Abjyz An Hjgetf

Year of construction: 2018, condition: used, machine/vehicle number: 11261804002, Swing over cross slide approx. 146 mm; center distance approx. 600 mm, turning diameter approx. 350 mm, max. spindle speed approx. 3,500 rpm, spindle speed (min.): approx. 30 - 3,500 rpm, travel X/Y/Z approx. 185/185/540 mm, spindle taper: MT 3 Itedsyztdrspfx Abgef

Year of construction: 2021, operating hours: 7,990 h, condition: used, machine/vehicle number: 318657, Power: 42.55 kVA, weight: 5,600 kg, 16-position tool changer, driven tools, Y-axis, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, 1 pallet with tools, 1 lot of clamping jaws, !!!Collection: 08+09 June 2026!!! Itjdpjyztf Aofx Abgof

Year of construction: 2023, operating hours: 2,730 h, condition: used, machine/vehicle number: 21760666, Max. turning diameter: approx. 300 mm, max. spindle speed: approx. 6,000 rpm, power: approx. 26 kW, max. workpiece weight: approx. 300 kg, travel ranges: Z-axis: approx. 350 mm, X-axis: approx. 90 mm, control: SIEMENS Sinumerik 840 D SL, 1 chip conveyor BÄR & CO. GF25L42L-P63, year of manufacture: 2017, serial no.: 61170009, air filter unit IFS M 1600, year of manufacture: 2015, serial no.: 544070-1, net weight: approx. 85 kg, connected load: 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.5 A, 1 coolant filter unit BÄR & CO. SF 51, year of manufacture: 2018, serial no.: 61180006, cooling unit RKV 4.3 K, year of manufacture: 2018, serial no.: 3-36613, connected load: 400 V/50 Hz, permissible operating pressure: approx. 28 bar, tank capacity: approx. 90 l, cooling medium: water, 1 two-door steel cabinet, contents: various machine tools and consumables Itjdpfoyztdfox Abgof

Year of construction: 2019, operating hours: 13,324 h, condition: used, machine/vehicle number: 298546, Travel distances (x/y/z): 230/100/575 mm, power: 47.4 kVA, weight: 5,600 kg, 16-position tool changer, Y-axis, new main spindle mid-2025, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, LNS Quick Load Servo 65 bar feeder, serial no.: 17000 200363, year of manufacture: 2025, 1 mesh box with accessories, 1 stool, !!!Collection: 21st + 26th May 2026!!! Iodpoyztgaefx Abgetf

Year of construction: 2005, condition: used, machine/vehicle number: 179948, Travel ranges (x/y/z): 630/230/1,585 mm, max. turning diameter: 760 mm, spindle bore: 102 mm, power: 61.8 kVA, weight: 11,600 kg, internal coolant supply, tool changer, chip conveyor, MAZATROL 640 MT Pro control, 1 tool cabinet with 7 drawers, with accessories, 2 pallets with tools/accessories, !!!Collection: 21st & 26th May 2026!!! Ijdpoyztggjfx Abgetf

Year of construction: 2008, operating hours: 36,239 h, condition: used, machine/vehicle number: 205849, Traverse paths (x/y/z): 230/100/575 mm, power: 46.2 kVA, weight: 5,200 kg, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, MAZATROL Matrix Nexus control, !!!Collection: 03.+04.06.2026!!! Iodpfx Ajyztf Nebgjtf

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Isdpfx Absyzr Hxogjtf

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors! Itedsyzn U Eopfx Abgef

Condition: ready for operation (used), Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment. Itjdeyzh A Ajpfx Abgjf

Condition: ready for operation (used), Year of construction: 1997, Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Iedoyzhazepfx Abgetf

Year of construction: 2003, condition: ready for operation (used), Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement. Itedpfxsyypmye Abgef

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Iedpfx Abeyyplisgjtf