Stahlfabrik

Condition: good (used), Year of construction: 2006, Description: The machine is in good technical condition, and can be tested upon prior arrangement. Control system: Haas CNC. Maximum turning diameter: 406 mm / 16". Maximum turning length: 1,219 mm / 48". Distance between centers: 1,219 mm / 48". Swing over carriage/cross slide: approx. 282 mm / 11.1". X-axis travel: 203 mm / 8". Z-axis travel: 1,219 mm / 48". Spindle: A2-6. Spindle bore: 76.2 mm / 3.00". Spindle speed: 0–2,000 rpm. Spindle power: 12 HP / approx. 8.9 kW. Torque: approx. 203 Nm at 150 rpm. Chuck: typically 10" / 254 mm. Tailstock: manual, depending on configuration. Weight: approx. 2,087 kg. Machine dimensions: approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection: 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A, depending on configuration. Gedpfx Aijzlhvzjyobp

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, EMCO TURN 45. Year of manufacture: 2011. Includes bar feeder TopLoad 8-42. As is, where is. Available from August 1, 2026. Gbjdpfezk E Hhex Aiyep

Condition: used, Year of construction: 1999, CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Gsdpfxjzku Nfe Aiysbp Equipped with 1 Bar Feeder type DH 65 Equipped with 1 chip conveyor Weight: approx 2,5 T

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Gbodpfx Aiezkpvmeyjp Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Gbodpozkpu Nofx Aiyep Type of control: CNC-Steuerung Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), General Machine Data Manufacturer: HAAS Model: SL-20 THE Machine Type: CNC Turning Center Year of Manufacture: 2008 Control System: HAAS CNC Working Area: Max. Turning Diameter: 262 mm Max. Turning Length: 508 mm Godjzkmbaepfx Aiyobp Max. Turning Length Between Centers: 610 mm Swinging Diameter over Front Apron: approx. 584 mm Swinging Diameter over Cross Slide: approx. 241 mm Main Spindle: Max. Spindle Speed: 4,000 RPM Spindle Drive Power: 15 kW / 20 HP Spindle Nose: A2-6 Spindle Bore: approx. 76 mm Max. Bar Diameter: approx. 51–52 mm Chuck Diameter: approx. 210 mm Axes and Travels: X-Axis Travel: 215 mm Z-Axis Travel: 508 mm Rapid Traverse X-Axis: approx. 30.5 m/min Rapid Traverse Z-Axis: approx. 30.5 m/min C-Axis and Driven Tools Tool Turret: Number of Tool Stations: 10 Turret Type: Disc Turret Driven Tool Stations: Available Tailstock: Hydraulic Tailstock Programmable Tailstock Function Bar Feeder: BREUNING IRCO ILS-RBK Machine Dimensions and Weight: Machine Width: approx. 1,575 mm Machine Height: approx. 1,830 mm Machine Length: approx. 3,200 mm Machine Weight: approx. 4,100 kg

Condition: like new (used), Year of construction: 2021, operating hours: 6,500 h, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year of Construction 2021) CNC Lathe – FANUC 0i-TF, 6,500 hours, Top Condition! • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of Construction: 2021 • Serial Number: S4E213351 • Control System: FANUC 0i-TF • Operating Hours: approx. 6,500 hours • Machine Type: Single-spindle lathe with tailstock • Number of Tool Positions: 12 (6 driven tools) • Precision C-axis: Full-fledged C-axis with a highly accurate resolution of 0.001° • Condition: Very good • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Further pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, the EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 6,500 hours and in very good condition. Gbsdpfozkhuhsx Aiyjp Special Features: • Control & Convenience: Modern FANUC 0i-TF control system for easy programming and a practical remote control for quick setup directly on the machine. • Powerful Main Drive: Single-spindle configuration with a substantial 13 kW drive power and a maximum speed of 6,300 rpm. • Tool Changer: Fast 12-position axial turret (VDI 30) with a turret switching time of only 0.14 seconds. • Productivity: Integrated chip conveyor (part catcher) for automatic and gentle removal of finished parts. • Quality Components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working Area & Travels • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main Spindle & Drive • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm • C-axis Resolution of the rotary axis: 0.001° (Rapid traverse speed: 1,000 rpm, Spindle indexing (disc brake): 0.01°) Tool Turret (Axial VDI 30) • Number of tool positions: 12 (6 driven tools) • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for boring bars: Ø 32 mm • Turret switching time: 0.14 sec Tailstock • Tailstock travel: 510 mm • Max. clamping force: 6,000 N • Max. travel speed: approx. 20 m/min • Internal taper for holding the roller center: MK 4 Feed Drives & Accuracy • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of Delivery & Terms of Sale • CNC lathe EMCO EMCOTURN E45 (S/N: S4E213351) • FANUC operating manuals & machine documentation • Delivery conditions: Loading by crane/forklift can be arranged on site. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 2012, machine/vehicle number: STA00161, XYZ CT52 2 Axis CNC Lathe Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2012 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox Gedpfxezkbirj Aiyebp For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79246 Machine Serial Number: STA00161 £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Godpfezi Hh Djx Aiyobp Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 780 mm, turning diameter: 480 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,900 mm, total length: 3,600 mm, total width: 1,900 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 5,400 kg, swing diameter over bed slide: 630 mm, chuck outer diameter: 203 mm, center width: 780 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 0i-TD, - Country of Manufacture: South Korea - Year of Manufacture: 2012 - Controller: Fanuc 0i-TD - Number of Turret Tools: 12 - Tailstock: has - Chuck Size: 8" - max Turning Diameter: 480 mm - Swing Over Saddle: 630 mm - Swing Over Bed: 760 mm - Machining Length: 780 mm - Bar Capacity: 76 mm - Spindle Bore Diameter: 90 mm - Max Spindle Speed: 3500 RPM - X Axis Travel: 260 mm - Z Axis Travel: 830 mm - Number of Axes: 2 - Spindle Power: 22 KW - X Axis Feed: 30 m/min Gbedezibvcjpfx Aiysp - Z Axis Feed: 30 m/min * * Weight (kg):* 5400 * Length (mm): 3600 * Width (mm): 1900 * Height (mm): 1900

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 780 mm, turning diameter: 500 mm, spindle bore: 2,500 mm, spindle nose: A2-8, bar diameter (max.): 90 mm, Capacity Turning Ø: 500 mm Turning length: 780 mm 1st Spindle Spindle nose: A2-8 ASA Bar capacity: 90 mm Spindle speed: 2500 rpm Motor power: 18,5-22 Kw C axis: CONTINUO degrees 1st Turret Gbodszh I Ntopfx Aiyep Motorized turret: 12- BMT65 Tailstock Cone: 4 BUILT IN CM specifications: Manual Guide i, Manual tool Presetting, Rigid tapping, set of toolholders, Hydraulic chuck Autoblok BHD-400 ASA 8” Bar capacity 118.

Condition: ready for operation (used), Year of construction: 2008, EMCO MAX TURN 45, including LM 1200. Includes chip conveyor. More images will follow. Gbedpfx Aijzhl Nwjyop

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm Gbsdpfxjzgw Tfs Aiyep control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws Gjdpfx Aozgt Ursiysbp

Condition: used, Year of construction: 2024, XYZ Proturn RLX425 x 1250mm Gap Bed Lathe with Prototrak RLX Control, Swing Over Bed 480mm, Max Spindle Speed 2500rpm, Spindle Bore 80mm, Tailstock. Serial No. RLX10180 (2024) Gbodpezgdxnsfx Aiyep Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe 2 axes (X, Z) Model: SL-300B Gbedpfx Aiezd R Ikoyep Year: 1998 CNC: Fanuc MSC-501 3-phase power Chip conveyor Documentation

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm Gbodpfezc Nznex Aiyjp X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: used, Year of construction: 1999, turning diameter 450 mm Gbodpfszbcy Uex Aiyop turning length 380 mm control Seicos 40L Multi max. machining diameter 340 mm Bar feed 51 mm turning speed range - spindle 30 ~ 5.000 U/min drive capacity - spindle motor 11 / 7,5 kW spindle nose A2-6 spindle bore 59 mm bearing diameter 100 mm travel -x axis 215 mm travel -z axis 400 mm turret (x-stations) 16 feed 0,001 ~ 500 mm/min rapid traverse X/Z: 30 m/min Shank diameter 25 x 25 mm Drill shank diameter 40 mm taper of center MK 5 tailstock adjustment 300 mm total power requirement 23 kVA weight of the machine ca. 4,6 t dimensions of the machine ca. 5,5 x 2,8 x 2,2 m CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII

Condition: ready for operation (used), Year of manufacture 2006 / Complete and ready for delivery / Available immediately / Location: Salzburg. Gsdpfjza Ugkex Aiyobp

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders Gedpfx Aioza D Rfeyjbp External reference: 598

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Gbsdpfx Aiszav D Djyjp Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control Gsdpfxszakk Eo Aiyebp 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Gbedpfx Aiszacwdsyjp Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: ready for operation (used), Year of construction: 2007, Manufacturer: HAAS Year of construction: 2007 MODEL: SL-40 Operating hours: 6200 Godpfx Aoy Tytqsiysbp Control system manufacturer: HAAS X-axis travel: 700 mm Z-axis travel: 1250 mm Number of tools: 12 Spindle power: 30 kW Spindle speed: 2400 RPM Max. turning diameter: 648 mm Bar capacity: 103 mm Fully programmable: Tailstock Machine weight: 9000 kg

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Gedjy Tkabspfx Aiysbp Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant