Gaubies

Year of construction: 1991, condition: ready for operation (used), Connected load: 11.5kW, rated voltage: 380/220 V, rated current: 25 A, control voltage: 24 V, upstream fuse: 35 A, operating hours: 56,780 h. Equipment: Complete machine assembly, Machine base, Workpiece magazine, Linear transfer system, Hydraulic feed unit (Stations I-IV): Version F, Option X, Hammering unit (Stations I+II): HE 17/D, Three-jaw version, Hammering unit (Stations III+IV): HE 17/E-D, Hydraulic feed unit (Station V): VS 29/200, Version F, Option X, Hammering unit, Cutting tool, Pump drive, Coolant system, Central lubrication system, Including hydraulic circuit diagram, Equipment list, Functional diagram, Electrical schematic. An on-site inspection is possible. Djdpfezkvl Ujx Adrjkp

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible. Dedpjzkvlhofx Adrjkp

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, coolant system, central lubrication system, control panel channel, workpiece magazine, feeding unit, linear transfer system, hammer unit, stations I to IV, hammer unit HE0, station V, cutting tool, hydraulic feed unit VS29/200, version F and X, hydraulic control system, electrical control system, hydraulic oil capacity: 175 l, lubrication oil capacity: 60 l, operating hours: 55,349h. Documentation available. On site inspection is possible. Djdpfx Ajzkvlnodrjkp

Condition: ready for operation (used), Operating hours: 59,018h, Equipment: Workpiece magazine, Linear transfer system, Station I: Swaging unit HU 15/VE, 4-die version, Stations I+II: Hydraulic feed unit VS 29/200, Version G, Station II: Swaging unit HE 17-V, Station III: Rotary station DS 19, Station III: Cutting tool SW 2, Station III: Hydraulic feed unit VS 29/200, Version A, Hydraulic pump drive, Cooling unit KE 33, Cooling unit KE 15, Central lubrication system, Documentation available, Operating manual, Oil specification, Maintenance and lubrication instructions, Hydraulic schematic HP 361, Hydraulic functional diagram, Hydraulic spare parts list, Electrical schematic with parts list Stp. 484, General assembly drawing. An on-site inspection is possible. Dodpfx Aszkvmrjdrskp

Condition: excellent (used), Description to follow! Dksdpszkl Dmofx Adrsp

Condition: excellent (used), Description to follow! Dsdozkl Daepfx Adrskp

Condition: excellent (used), Description to follow! Djdpfx Aezkl Dgedrokp

Year of construction: 2017, condition: used, functionality: fully functional, electrically heated Dksdpfezkg Tijx Adrep Operating temperature: max. 150°C (Can optionally be increased by raising the power, after prior consultation) Internal dimensions: 1,400 x 1,300 x 1,600 mm (W x D x H) Heating capacity: 12 kW Connected load: 12.6 kVA

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION Dkodpfxszkf I Eo Adrep - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock Dedpfjzkbt Dex Adrekp >10 pallets available

Year of construction: 2004, condition: good (used), Bar loader magazine: IRCO ILS RBK 10016 Year: 2004 Dkjdpfx Adjzkbtwjrep SPECIFICATIONS Bar capacity: 5 - 100 mm Bar : 1200 mm

Year of construction: 2007, condition: good (used), Automation Machine type: Indumatik Light 30 Dkjdpfx Adjzkbtqerep Year: 2007 SPECIFICATIONS Max. workpiece weight: 30 kg Palett system Palett size: 240 x 190 mm Amount of paletts: 50 Req. space (LxBxH): 1,74 x 1,3 x 2,4 m

Year of construction: 2001, condition: ready for operation (used), A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 1500mm/1200mm/1400mm, Weight: approx. 250kg. Inspection possible by appointment. Dodpfx Adjzka N Rerjkp

Condition: used, Complete FARMER NORTON 4V-2M Bar straightening line for sale The FARMER NORTON 4V-2M bar straightening line is designed for straightening steel bars with diameters from 25 mm to 100 mm. This complete line is suitable for processing materials with a tensile strength of up to 1,000 N/mm² and offers a maximum straightening speed of 30 m/ machine is equipped with a 2-roll straightening system featuring large-diameter rolls for efficient straightening of heavy steel bars. Technical Specifications · Manufacturer: FARMER NORTON (UK) · Model: 4V-2M · Bar diameter range: 25–100 mm · Material tensile strength: Up to 1,000 N/mm² · Maximum straightening speed: 30 m/min · Straightening rolls: Ø457 × 686 mm · Straightening system: 2-roll Scope of Supply 1. Loading table 2. Entry conveyor with pinch roll 3. Complete 2-roll bar straightening machine 4. Exit conveyor 5. Collecting table 6. Electrical equipment 7. Available documentation Benefits ✔ Complete straightening line ready for installation ✔ Wide working range from 25 to 100 mm ✔ Suitable for high-strength steel materials ✔ Robust British industrial construction If you are looking for a robust European bar straightening machine, this complete line offers an efficient solution for heavy bar straightening operations. Dkodpfxozi T Ahs Adrep Bar diameter range: 25 - 100 mm Material tensile strength: Up to 1.000 N/mm² Maximum straightening speed: 30 m/min Straightening rolls: Ø 457 × 686 mm Straightening system: 2-roll

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dodpfx Aszi Sfzodrekp Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, Simple laser tube cutting – reliable, versatile, and profitable. Economical laser cutting of tubes up to 170 mm outer diameter, even with low utilization rates. Whether you want to insource quality, manufacture in a more flexible and faster manner, or tap into new customers and markets: the TruLaser Tube 3000 is your machine, and thanks to its easy operation, it is also ideal for beginners or as an additional machine. Included: Tube support (raw material) with automatically retractable tube supports Solid-state laser TruFiber 3001 Machine bed for 6.5 m raw material length Unloading station for 3 m finished part length (including scrap container) LoadMaster Tube for 6.5 m raw material length (including bundle trough) for automated loading Optional extensions: Machine bed for 8.0 m raw material length for loading and unloading Technology packages for bevel cutting, Rapid Cut, and reduction of spatter adhesion (Spatter Guard) Weld seam detection (SeamLine) inside and outside Highly innovative and user-friendly TRUMPF programming with Programming Tube Service: Installation, commissioning, training 12 months warranty Dsdpszi Rc Ejfx Adrskp Remote service agreement in the first year TRUMPF quality Our fast remote service support takes care of your needs worldwide. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design and implementation of many thousands of sheet metal fabrication projects, particularly in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, as well as experts in software, automation, and smart factories, you will always receive a customized offer that is tailored to your requirements. P.S.: We will also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with both financial and entrepreneurial challenges.

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Dkjdpfszi E D Dsx Adrsp

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery Dkjdpfjzi E Dqjx Adrsp ifthis is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, DRILLING UNIT TRAVEL: 1500 MM + 550 MM MANUAL POSITIONING MAX. DRILLING DIAMETER: 32 MM MILLING/BORING SPINDLE TRAVEL: 380 MM, ISO 50 TAPER Dsdpfozi En Nex Adrskp VERTICAL TRAVEL: 1700 MM COLUMN TRAVEL: 1000 MM ROTARY TABLE: 2500 X 2500 - TRAVEL 2500 MM, CAPACITY 25 TONS CNC FIDIA

Year of construction: 2005, condition: used, Rotary indexing machine Kneissler KE 8-180D, manufactured in 2005. Dkedpfjziz Rgox Adrjp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Dsdpfozizp Aox Adrekp Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: used, functionality: fully functional, Lathe Make: AMC Type: TECHNIC Distance between centers: 1000 mm Center height: 180 to 230 mm Diameter over bed: ≈ 360 mm Diameter over carriage: ≈ 200 mm Spindle bore: 40 to 52 mm Spindle speeds: 12 to 18 mechanical speeds (approx. 30 – 2000 rpm) Motor: 3 to 5.5 kW, three-phase Weight: approx. 1200 – 1600 kg Dkedpfoziyuqsx Adrjp

Condition: used, functionality: fully functional, Offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD-60, 7,856 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Djdjzivhtspfx Adrekp Pump 2 Flow 7XD-60, 25,179 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pumps are from a single original owner and are in good condition. The pumps have been completely overhauled by us and will be ready for operation in approximately 3 weeks. Prices available upon request.

Year of construction: 2016, condition: ready for operation (used), overall weight: 850 kg, total height: 2,450 mm, This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 holders. Equipped with water cooling DF-7 and a cooling compressor, it's suitable for ambient temperatures between 10-40°C. Ideal for efficient media mixing and tool handling. Reach out for more information. Additional equipment • Process container stainless steel • Jog mode possible during workpiece change • Additional storage space for workpieces and workpiece holders • Holder for 10 workpiece holders • Cooling compressor holder to mix the media for L2 ringholder • DF tools for L2 / total length 424mm (20 pieces) Dkjdpfx Ajzik Smedrsp Extra Information Designed for ambient temperature range of 10-40°C Equipped with water cooling DF-7*Internal dimensions of the process vessel (Ø, depth, usable level). (Ø 970mm, depth 450mm, usable level 300mm). *Maximum workpiece dimensions incl. holder (real swivel space) (450mm) *Torque/power and speed ranges of the spindles. (50 rpm.) • media (H1/400), compounds(P28), media filling quantity (kg) (50kg) *scope of delivery (number of spindles, (10)holders, (10) existing fixtures/tools(holder for Rings), filtration/separation (available). • Machine type :DF10,version: DF10_8295_SPS80.01_V80.01 Dimensions Machine Depth 1370 mm

Year of construction: 2004, operating hours: 4,840 h, condition: ready for operation (used), Machine tool manufactured in 2004. This MYLÄP BLP 600/3S features a power of 2.2 kW and operates at a supply voltage of 400 V. If you are looking to get high-quality capabilities, consider the MYLÄP BLP 600/3S machine we have for sale. Contact us for further details. • Supply Voltage: 400 V • Power: 2.2 kW • CE Certified Dodpfx Aozidmwedrjkp