SMS Engineering

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 1,800 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,250 mm, spindle motor power: 75,000 W, overall weight: 21,500 kg, number of axes: 3, This 3s DOOSAN PUMA 600LM was manufactured in 2007. It features a 45° inclined cast-iron bed and prismatic guideways with Rulon 142 antifriction material. The spindle offers a speed range of 15 – 1,800 rpm and a maximum torque of 9,025 Nm. With a bar capacity of 152 mm and continuous C-axis rotation, consider the opportunity to buy this DOOSAN PUMA 600LM horizontal turning machine. Contact us for further details. • Guideways: Prismatic with Rulon 142 antifriction material • Spindle: • Nose: ASA A2-15 • Maximum torque: 7,220 / 9,025 Nm • Bar capacity: 152 mm • C-axis: continuous interpolated, 0.001° resolution • Axes: • Number of axes: 3 (X, Z, C) Gedpfjyi Uwbex Afnjbh • C-axis rotation: ±360° continuous • Feeds: • Rapid feed X-axis: 12 m/min • Rapid feed Z-axis: 10 m/min • Maximum interpolated feed: 500 mm/rev • Ball screws diameter: Ø 50 / 63 mm

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 3,000 rpm, total height: 1,997 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm. Machine Benefits Technical Machine Benefits • Max swing over bed: 750 mm • Swing over carriage: 480 mm • Max turning diameter: 500 mm • Max turning lenght: 1260 mm • Sub spindle: 4000 rpm • C axis indexing: 0. 001º • X, z and b axis Gjdpfx Afeyi Elconsbh • Turret with 12 live tool position • Mt5 tailstock Dimensions Machine Depth 2002 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 790 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 0i-TD control, This Hwacheon HI-ECO 450A YMC lathe was manufactured in 2013. It features a Fanuc 0i-TD control, a spindle speed of 3,500 rpm, and a spindle power of 22/18.5 Kw. The machine offers a maximum rotating diameter of Ø 700 mm and a workable length of 637 mm. It includes a tool turret with 12 live tool positions and a chip evacuator. For more information about this lathe, please reach out to us. Machine Benefits Qualitative Machine Benefits • Several holders included • Accessories chip evacuator Technical Machine Benefits • Max. Rotating diameter Ø 700 mm • Max. Rotating diameter on pallet Ø 550 mm Gbedpfxeyi Ek Ee Afnoh • Turning diameter Ø 254-420 mm • Max length workable 637 mm • Self-centering diameter Ø 250 mm • Spindle connection asa 2-8 • Spindle hole Ø 90 mm • Bar passage Ø 76 mm • Indexing 0. 001 ° • Tool turret with 12 live tool positions

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,000 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 450 mm, turning diameter: 355 mm, spindle bore: 75 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rotational speed (min.): 50 rpm, rotational speed (max.): 4,500 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, Twin-spindle lathe with BMT65 driven tools, Y-axis, TOP Automazioni bar feeder, parts unloading arm, chip conveyor, tool presetter, toolholder kit. CNC FANUC. Gsdpfx Ajyiurxsfnebh

Condition: ready for operation (used), Year of construction: 2006, operating hours: 5,777 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series Oi-TC, number of axes: 2, This ACCUWAY UT-300 horizontal turning machine was manufactured in 2006. It features a maximum cutting diameter of 500mm and a maximum cutting length of 700mm, providing robust capabilities for various turning applications. With a spindle speed of 3,500rpm and a turret that accommodates 12 tools, consider the opportunity to buy this ACCUWAY UT-300 horizontal turning machine. Contact us for further details. • Swing over Z: 612 mm Gbodpeyit Rgofx Afnjh • Swing over X: 388 mm • Max. cutting diameter: 500 mm • Max. cutting length: 700 mm • Turret positions: 12

Condition: ready for operation (used), Year of construction: 2015, operating hours: 52,333 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 300 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 3, This 3s JENN-WEI JMY-6020 horizontal turning machine was manufactured in 2015. It features a maximum turning diameter of 180 mm and a turning length of 300 mm, with a spindle speed of 5,000 rpm. The machine is equipped with a Fanuc Oi-TD control and includes a bar feeder, extraction system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the JENN-WEI JMY-6020 machine we have for sale. Contact us for further details. • Max. turning diameter: 180 mm • Max. turning length: 300 mm • Rapid traverse: X 20 m/min, Z 24 m/min, Y 10 m/min • Drive: Direct drive on all axes Gsdpfoyir Iwox Afnebh • A2-6 spindle nose, 60 mm bar bore • Turret: VDI-30 driven, 20 positions, tool holder 20 mm, round tool 25 mm, 2.2/3.7 kW • Power-on time: approx. 52,333 hours • Production run: approx. 900,000 items Additional equipment • Bar feeder • Extraction system • Chip conveyor • Green discharge conveyor

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 5,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, total height: 1,956 mm, total width: 2,921 mm, overall weight: 4,000 kg, product length (max.): 4,191 mm, number of axes: 2, This horizontal turning machine was manufactured in 2017. The HAAS ST-20SS features a maximum turning diameter of 330 mm and a turning length of 572 mm. It includes a hybrid VDI/BOT tool turret with 24 positions and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20SS machine we have for sale. Contact us for further details. • Machining capacity: • Maximum turning diameter: 330 mm • Maximum turning length: 572 mm • Spindle bar capacity: 51 mm Gbodoyifcrjpfx Afnsh • Axes: • Rapid feed X-axis: 24 m/min • Rapid feed Z-axis: 24 m/min • Spindle: • Spindle nose: ASA 6 • Chuck size: 210 mm • Tooling: • Tool turret: Hybrid VDI/BOT – 24 positions • General: • Coolant tank capacity: 208 L

Condition: used, Year of construction: 1995, functionality: fully functional, Manufacturer/Model: MIYANO BND-34T2L Year of manufacture: 1995 Condition: Very good Gbedjyidx Sopfx Afnjh Location: Spain Delivery/loading possible. Turning diameter: 120 mm Turning length: 290 mm Collet diameter: 34 mm Spindle speed: 4,000 rpm Motor power: 7.5 kW Tool turret: 8 stations Tool turret: 6 stations Z-axis travel: 292 mm X-axis travel: 101 mm Turret travel 2nd B-axis: 228 mm Automatic bar feeder LNS HYDROBAR

Condition: good (used), Year of construction: 2016, Manufacturer: WEILER | Model: DZ 40 / ARY | Serial Number: LI 01 | Year of Manufacture: 2016 | Max. swing diameter: 560 mm; X travel: 200 mm; Z travel: 350 mm; Turning length (chuck to center): 300 mm; Spindle head according to DIN 55026/A, size 5; Chuck size: 160 mm; Material passage in pull/push tube: 42 mm; Spindle bore: 52 mm; Max. speed: 6300 rpm; Siemens Sinumerik 840D Solution Line CNC control in basic version; Accessories in the two cabinets; Dimensions: approx. 2000 mm x 2300 mm x 3300 mm (W x H x L); approx. 5000 kg; The indicated dimensions are approximate values. All other information without guarantee. | Grey | Steel Gedpfjyidbgex Afnjbh

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,790 h, spindle speed (max.): 6,000 rpm, spindle motor power: 11,500 W, number of axes: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Additional equipment • 22KW Okuma Spindle Main an Sub • 70mm max Bar Capacity Main Spindle and Bar Feeder Samsys • 2 turrets, each 16 stations, BMT55, live tools • proven and extremely sturdy and stable OSP300 • 80 bar Okuma high pressure package (Japan factory fitted stronger seals), on both turrets. Ideal e.g. for deephole drilling in inox, titanium, inconel. • In excellent conition, geometry very good. Okuma serviced and geometry report upon sale. • Automation: Samsys short bar loader • Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools • two BMT55 revolvers with 16 stations each Machine Benefits Technical Machine Benefits • Features: reduction of machine-related idle times, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty • Machine hours: 2268 Gedpeyh Ntlsfx Afnobh • Z taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 nm • Y-axis: y-axis in the upper turret with a movement range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c axes • Tool monitoring system • Tool corrections: 96 tool corrections per turret Extra Information • Spindle Orientation: Electronic spindle orientation +/- 0.1 Memory: 2 GB part program memory with a maximum program length of 2 MB Data Management: MacMan machine management with integrated production data acquisition Control Unit Control System: CNC double turning center with a control system featuring OSP suite with numerous apps and ECO suite energy-saving features Display: 15" color LCD TFT with 3D color graphics and a multi-touch screen/panel Operating System: Second Windows operating system for operation and data communication Controller Ports: 2 USB 2.0 ports on the control panel Communication: Ethernet/LAN interface with browser and DNC-T1 for program transfer Turret Tool Stations: Upper and lower turrets each with 16 driven tool stations Motor Power: 5.5 kW per motor Speed Range: 50 - 6000 rpm Torque: 22.5 Nm Number of axes Upper turret: X/Y/Z/C (turret can be used both left and right, of course) Number of axes:Sub-spindle (right): lower turret XZC (turret can be used both left and right) chuck main spindle (left) Hainbuch mini 'Axzug' 65 (pull) Maximum clamping diameter on the main chuck (65 mm) chuck secondary spindle yes, Hainbuch mini 'Axfix' 65 (fixed, ideal for part relay into right hand spindle) Maximum clamping diameter on the main chuck (65 mm) Transformer included Inspection is available from 2023. Machine is in great condition and within geometry Maintenance protocol is available • 2x 22 kW PREX spindle, spindle passage on the left side sufficient for 70 mm bars. Mounted chucks: Hainbuch 65 Axzug and Axfix. • 2x 16-station turret, BMT55, top left with Y

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AZ0238, turning length: 400 mm, turning diameter: 250 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,400 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, SPINNER TC 300 52 SMCY CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 35 A - Maximum swing diameter: 300 mm - Y-axis travel: +45/-30 mm Spindle 1: - Maximum speed: 5,000 rpm - Spindle power: 15 kW - Torque: 95 Nm Spindle 2: - Maximum speed: 7,000 rpm - Spindle power: 6/7.8 kW - Turret number of tools: 12 - Tool holder: VDI 25 - Including live tools: 12 - Maximum speed: 6,000 rpm Gbodpsyh Iryjfx Afneh - Including chip conveyor Note: The item must be collected on a binding appointment between 01 and 02 April 2026 to be coordinated. FCA D-79115 Freiburg – loaded on truck

Condition: excellent (used), Year of construction: 1996, turning length: 300 mm, spindle bore: 52 mm, travel distance X-axis: 110 mm, travel distance Z-axis: 300 mm, Max. turning Ø:180mm X-Axis: 110mm Z-Axis: 300mm Spindle bore: 52mm Gbedpfx Afoyh Iadjnsh ATC / revolver:12 Pinole taper: 3Mk Stroke pinole: 40mm Length: 2000mm Width: 1450mm Height: 1700mm Weight: 2500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4s HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features a C+Y-axis, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. With additional features like an automatic tool presetter, bent-type chip conveyor, and a programmable tailstock, consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Gjdpfxjyh Hw Is Afnobh Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: good (used), Year of construction: 2000, Radial drilling machine WEILER VO 75, no. 146382062, year of manufacture 2000, outreach approx. 200 cm, with 2 large clamping cubes. Gsdpfx Ajyhqngsfnebh

Condition: ready for operation (used), Year of construction: 2023, operating hours: 540 h, spindle speed (max.): 2,000 rpm, spindle motor power: 26,000 W, total height: 2,200 mm, total width: 2,300 mm, overall weight: 8,150 kg, product length (max.): 6,300 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This STYLE 750 (4000dbc) features a swing diameter over bed of 750 mm and a distance between centers of 4000 mm. It is equipped with a powerful 26 kW main motor and a maximum spindle speed of 2000 rpm. Consider the opportunity to buy this STYLE 750 (4000dbc) horizontal turning machine. Contact us for further details. • Swing diameter over bed: 750 mm • Swing diameter over slide: 530 mm • Distance between centers: 4000 mm • Bed width: 450 mm • Maximum load between centers: 1800 kg • Maximum load with fixed steady rest (type U): 2500 kg • Spindle bore: 105 mm • Spindle (A2-11) • Axes: • X-axis ball screw Ø: 32 mm • Z-axis ball screw Ø: 50 mm • Rapid traverse: 8 m/min • Feed range: 0.01–2000 mm/min • Tailstock: • Quill diameter: 125 mm • Quill stroke: 225 mm • Quill taper: MT6 • Standard equipment (machine-integrated): • LED machine lighting • Cooling • Automatic lubrication • Steel ball screw covers Godsyhpq Tepfx Afnobh • Full cover • Front sliding door • Electronic handwheel • Constant cutting speed Additional equipment • Chip conveyor • Automatic tool changer, 8 positions, VDI-50 • Heavy-duty tailstock, desktop version SW • 26 kW main motor • Oil separator • Steady rest D50–300 mm • Steady rest D60–400 mm • Coolant pump switch • 3-jaw chuck Ø315 – Schunk Rota S Plus 2.0 • Speed potentiometer • LED lamp • LAN • Stronger cooling with gun • Handwheel

Condition: ready for operation (used), Year of construction: 2004, overall weight: 3,000 kg, number of axes: 3, This 3s Challenger BNC 1840 horizontal turning machine was manufactured in 2004. It is equipped with an electric four-position tool post and features a Schunk ROTA-S-Plus 250-62 chuck in excellent condition. Additionally, two custom-made chucks and a steady rest are included. Consider the opportunity to buy this Challenger BNC 1840 horizontal turning machine. Contact us for further details. • Electric four-position tool post • Center height: 230 mm • Center distance: 1,000 mm • Spindle mount: CAMLOCK D1-6 (DIN 55029) • Cutting control: constant cutting speed (CSS) • Gross weight: 3,350 kg • Hour meters: not available (no machine or spindle hour meter) • Documentation: original documentation and operating manuals included Additional equipment • Schunk ROTA-S-Plus 250-62 chuck (excellent condition) Gsdpfx Ajyhnymefnobh • Two custom-made chucks • Steady rest

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 35,000 W, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100 B horizontal turning machine was manufactured in 2019. It features a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it offers efficient machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100 B machine we have for sale. Contact us for further details. • Swing over bed: 790 mm • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm • Maximum turning length: 1,042 mm • Bar diameter: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid feed X-axis: 16 m/min • Rapid feed Z-axis: 20 m/min • Quill diameter: 120 mm Gbedpfoyhdbgex Afnsh • Motorized quill bore taper: MT#6 • Quill travel: 120 mm

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,200 rpm, controller manufacturer: FANUC, controller model: 0i-TF, number of axes: 2, Horizontal turning machine manufactured in 2019. This Victor Vturn-NP20 was moderately used, with only 3,000 real operating hours, and is in very good technical condition. It features a standard turning diameter of 206 mm and a bar capacity of 52 mm, making it suitable for machining small and medium-sized parts. Consider the opportunity to buy this Victor Vturn-NP20 horizontal turning machine. Contact us for further details. • Compact CNC lathe suitable for small/medium parts, serial production, and bar machining • Configuration: 2 axes (X, Z) Gsdpsyhcqaefx Afnobh • Standard turning diameter: 206 mm • Bar capacity: 52 mm • Distance between centers: 520 mm • Turret: 12 stations, 25 mm tool shank • Operating hours: 3,000 (verifiable from CNC menu) • Condition: Moderately used, very good technical condition, properly maintained • Ready for immediate production; no additional investment required • Can be tested at the seller’s workshop Additional equipment • Chip conveyor • Chip trolley

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, controller manufacturer: HAAS, number of axes: 2, Horizontal turning machine manufactured in 2001. This HAAS SL-30THE was designed for precision with a spindle speed of 3,000 RPM and a claw chuck diameter of 254 mm. With an X-axis travel of 287 mm and a Z-axis travel of 864 mm, it offers reliable performance for turning applications. Consider the opportunity to buy this HAAS SL-30THE horizontal turning machine. Contact us for further details. Gedpfx Afoyhb Rrsnsbh • Claw chuck diameter: 254 mm

Condition: good (used), Year of construction: 1990, operating hours: 33,000 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 38 mm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Lathe Maho GR200 C Year of manufacture: approx. 1990 This is a nice, compact machine and I regret having to sell it. Power-on hours: approx. 35,000, spindle hours approx. 10,000, of which approx. 1,000 hours since the spindle bearings were replaced. The machine features automatic tool measurement using Tooleye (currently not in use). Collet chuck Röhm for diameters 3 to 42 mm. 8-position tool turret. VDI20 tool holder. Various tool holders with assorted tools included. The spindle module was renewed by Almendinger about four months ago. The machine is in very good condition; the axes and spindle run smoothly and without issues. Accuracy is excellent. The machine can be inspected and demonstrated under power at our premises. Sold with the accessories shown in the photos. Optionally, a three-jaw chuck from SMC Autoblock, Type KNCS 170/43 incl. various jaws and claw jaws, can be purchased separately. The three-jaw chuck is not included in the price. See photos. Gbsdoyhbatepfx Afnjh

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec Gedoyg Iclspfx Afnebh • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2012, number of axes: 2, Horizontal turning machine manufactured in 2012. This SOMAB ALPHAMAB 336 EP2200 features a maximum turning diameter of 800 mm and a distance between centers of 2200 mm. It includes a 12-station automatic turret and a spindle speed of 0–2100 rpm. If you are looking to get high-quality turning capabilities, consider the SOMAB ALPHAMAB 336 EP2200 machine we have for sale. Contact us for further details. • Capacity: Max turning diameter over bed 800 mm; over carriage 630 mm; distance between centers 2200 mm • Rapid traverse: X 20 m/min; Z 24 m/min • Spindle: A2-11" nose; 131 mm bore Gbedpfxoyg Ht Nj Afneh • Turret: 12 stations; 32 × 32 mm tools • Electronic handwheel • Air-conditioned electrical cabinet • 3-color status lamp • Hydraulic tailstock CM6; quill stroke 130 mm • Automatic centralized lubrication • Condition: Very good Additional equipment • Chip conveyor • Coolant system • Manual 4-jaw chuck Ø 600 mm • Manual 6-jaw chuck Ø 400 mm • Self-centering steady rest

Condition: good (used), Year of construction: 1999, functionality: fully functional, Fanuc control, two turrets, sub-spindle, chip conveyor, bar feeder, immediately available. Gbodpfx Aeyg Hr Eofneh

Condition: ready for operation (used), Year of construction: 2011, CNC lathe with dual spindle MW Series MURATEC MW120, used, operational and ready for use. Year 2011. Technical specifications: Chuck size: STD: 165 mm - OTP: 210 mm. Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Gbjdpfoygxbrjx Afnoh Max spindle speed: 6,000 rpm Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Gross weight with loader: 4,500 kg.

Condition: ready for operation (used), Year of construction: 2013, Double-spindle CNC lathe MW Series MURATEC MW120, used, functional and ready for operation. Technical specifications: Gsdeygxa Uspfx Afnebh Chuck size: STD: 165 mm - OTP: 210 mm Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Max spindle speed: 6,000 min⁻¹ Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Gross weight with loader: 4,500 kg.