KSS Jansen

Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Cgsdjy Nmkbjpfx Anwjt Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Codpfx Aey Nluxjnwegt Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Manufacture year: 2016 Operating hours: 32,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 100 t Tie bar distance: 470 x 470 mm Mould installation height min.: 250 mm Plate distance max.: 850 mm Dimensions: 4100 x 1700 x 2400 mm Eeight: 5030 kg Connected load: 21 kW Accu, Robot Interface EM67, EM73, Airvalve Price: on request Cgjdpfxoy Nlrws Anwjt contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) Cgodpfxey Nkwlo Anwjt • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: used, Year of construction: 2012, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW Cedpfx Aoy I Anmsnwegt • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Cgjdpfx Aney Iwlaswjt Technical specifications as per the pictures! Machine is immediately available!

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer for injection moulding machines, we offer the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale distributor of injection moulding machines for over 25 years. Vertical Rotary Table Injection Moulding Machine Manufacturer: Engel Model: Insert 200H/70 Serial Number: 179742 Cedpfoy Ir Nyjx Anwsgt Year of manufacture: 2011 Operating hours: 57,077 h Control system: CC 200 Languages: German/English Fully functional Very well maintained condition Machine comes from first German owner xxxxx without the peripheral equipment shown xxxxx Extras Light curtain / light barrier Freely programmable inputs and outputs 9 freely programmable inputs, programmable depending on station 9 freely programmable outputs Handling interface Euromap 67 Charge amplifier for cavity-pressure dependent switchover, including corresponding graphic pages 3 potential-free monitoring inputs for monitoring peripherals such as temperature control units Euromap 63 interface for connection to machine data acquisition Hot runner controller / valve gate control Injection unit Screw diameter: 30 mm Shot weight: 89 g (PS) Injection pressure: 1,451 bar (increased: 2,205) Shot volume: 99 cm³ Clamping unit Clamping force: 70 t / 700 kN Rotary table diameter: 1,200 mm Opening stroke: 305 mm Ejector stroke / force: 105 mm / 20.1 kN Fully electric clamping unit Warranty Warranty up to first commissioning Loading / Transport Free loading onto buyer's truck or free delivery (ex works Hanover, Germany) against reimbursement of freight charges Immediately available from our warehouse in Hanover, Germany

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm tie bar distance: 370x370mm machine is in good working condition immediately available at our warehouse. Cjdpfx Asy Eyq Henwegt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 46,201 h, functionality: fully functional, clamping force: 784 kN, screw diameter: 30 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 80 t Screw diameter: 30 mm Tie bar distance: 370 mm x 370 mm Codpsy Ew Rdefx Anwjgt MACHINE DETAILS Operating hours: 46,201 h EQUIPMENT Sprue picker Note: When purchasing multiple items from the same location (see offers below), the lower costs for disassembly and loading will be waived for you.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 13,184 h, functionality: fully functional, clamping force: 588 kN, screw diameter: 30 mm, injection weight: 77 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 60 tons Screw diameter: 30 mm Injection weight: 77.1 g MACHINE DETAILS Csdoy Ew Dwspfx Anwegt Operating hours: 13,184 h Note: When purchasing multiple items from the same location (see offers below), the most favorable dismantling and loading costs will apply.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, clamping force: 980 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cgedpsy Ewmxsfx Anwet Clamping force: 100 t Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lower costs for dismantling and loading.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 555172, clamping force: 275 kN, screw diameter: 60 mm, displacement volume: 763 cm³, For sale is an injection molding machine, Ferromatik Milacron K 275 S. Technical data: Type: K 275 S K-TEC series Machine number: 555172 Year of manufacture: 1998 Clamping force: 275 kN Tie bar spacing: 630 x 630 mm Screw diameter: 60 mm Maximum shot volume: 763 cm³ Number of heating zones: 5 Installed heating power approx. 18 – 25 kW Dimensions: 7.5 x 2.2 x 2.7 m Net weight: 15,500 kg Cedoy Ep Dgjpfx Anwsgt Transport and loading can be organized Europe-wide for an additional charge. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: good (used), Year of construction: 2007, operating hours: 79,253 h, functionality: fully functional, machine/vehicle number: 69319, clamping force: 350 kN, screw diameter: 28 mm, displacement volume: 58 cm³, injection pressure: 1,577 bar, plate width: 400 mm, plate height: 425 mm, installation height: 200 mm, total length: 2,390 mm, total width: 880 mm, total height: 1,800 mm, overall weight: 1,300 kg, Equipment: documentation/manual, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. Cgsdey D R N Djpfx Anwot The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Cgodpfx Aey Duaaonwjt Screw diameter: 30 mm Screw diameter 2: 25 mm Type: Multicomponent Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2016, operating hours: 600,230 h, clamping force: 600 kN, overall weight: 6,300 kg, Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine. • Operating pressure: 210 bar • Injection pressure: 150 bar • Injection force: 182 kN • Opening stroke: 0–350 mm • Mould installation height: 200–500 mm • Protection class: IP54 Codpsy Dr Nfefx Anwogt • Power supply 1: 3PH+E, 400 V, 50 Hz • Nominal current supply 1: 29 A • Short circuit current (supply 1): 20 kA • Power supply 2: 3PH+MP+E, 400 V, 50 Hz • Nominal current supply 2: 120 A • Short circuit current (supply 2): 20 kA • Pump motor power: 15 kW • Heating power: 13.66 kW • Total connected load: 65.1 kW • Total connected load (alternative): 62.4 kW • Socket F11: 400 V, 9 A • Socket F12: 230 V, 20 A • Socket F110: 230 V, 10 A

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Cgedpsy Dqcdjfx Anwjt Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Cgjdpfxjy Dqb Ho Anwet Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Cedpfxsy Dqbyo Anwsgt Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Cgedpfx Anjy Dqbtjwot Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of manufacture: 2003 Injection unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 interface Robot interface Air valve x 1 Cedpfxey Dqbae Anwsgt Core pull control Injection unit hardened - bimetallic Proportional valve on the injection unit – for precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/Motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Cjdpfx Ajy Dqa Asnwogt Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Cgedpfx Ajy Dqavsnwet Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320K 700-100 Year of construction: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Distance between tie bars: 320x320 mm Size of the clamping platens: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Cgjdpfxjy Dqaps Anwjt Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - bimetal Central lubrication Original Arburg mold crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/width/height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating output: 4.9 kW Total output: 15.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 Cjdoy Dp U Sjpfx Anwsgt injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Codpfxjy Dp U Ej Anwogt Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request