Swiss Performance Engine GmbH

Condition: used, Year of construction: 1998, functionality: fully functional, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 1200 x 600, H=500 - Gas heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system Godpfx Aezub Ayem Asbr + IPSEN ENDOTHERMIC GENERATOR 2018 (new heating element in 2023) - Gas heating - Reaction gas = natural gas

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Gbjdeztrbwjpfx Am Ajr

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Gbedpfxeztrbkj Am Ajr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal dimensions (L x W x H) (mm): 600 x 500 x 500 -Batch weight: 300 kg -External dimensions (L x W x H) (mm): 4200 x 2500 x 3500 Gjdszr U Anjpfx Am Ajbr -Space requirement (L x W x H) (mm): 5000 x 5000 x 4000 -Weight (net): 13000 kg -Total connected load: 125 kVA -Connection voltage: 400 V -Current protection: 250 A -Control system: Stange SE 607 -Documentation You can find the description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces

Condition: used, Year of construction: 2003, machine/vehicle number: 7190, functionality: fully functional, power: 333 kW (452.75 HP), input voltage: 400 V, input current: 70 A, type of input current: three-phase, temperature: 920 °C, total length: 10,700 mm, total width: 4,250 mm, control type: PLC-controlled, fuel type: gas, Equipment: CE marking, documentation/manual, We offer this used CIEFFE FORNI INDUSTRIALI S.P.A. continuous roller oven, model FORNO CONTINUO A RULLI, manufactured in 2003. Serial number: 7190 Gbsdpfezq Eblex Am Ajr Year of manufacture: 2003 Heating type: Gas Total power: 48 kVA Rated voltage: 3 x 400 V Rated current: 70 A Gas heating power: 333 kW Line protection: 63 A Power supply line protection: 40 A Control voltage: 230 AC V Control voltage: 24 DC V Maximum temperature: 920 °C If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. Gbsdpfxezq Ax Uo Am Aor If you have any questions or require additional information, please send a message or contact us by phone.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Godpfx Amjzqclhs Aobr

Condition: repair required (used), functionality: fully functional, power: 8 kW (10.88 HP), control type: manual, Hardening or annealing furnace. Requires minor repairs but is functional. Internal dimensions: W = 290 mm, H = 260 mm, D = 400 mm. Power consumption: approx. 8 kW. Weight: approx. 250 kg (top and bottom sections/frame). Dimensions: Top section W x D x H = 670 x 850 x 950 mm. Gedpfx Ajzqac Rjm Aobr Bottom section: 650 x 670 x 730 mm.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale is a sintering and hardening furnace from Arnold-Schröder in very good, like-new condition, as can be seen in the pictures. Technical data: • Manufacturer: Arnold Schröder Industrieöfen • Model: ASM-20 • For temperatures up to 1300°C • Internal dimensions: approx. 250 x 350 x 200 mm (W x D x H) • Usable volume: approx. 18 liters • Power: approx. 6 kW Godpfx Aozpzmnsm Aobr • With Bentrup TC5050 control system • Year of manufacture: approx. 2015 • Condition: Like new, fully functional The furnace can be inspected and tested at any time! Shipping costs via freight carrier: approx. €150 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors and omissions in technical data and prior sale reserved.

Condition: used, Year of construction: 2007, Product Information "Annealing Furnace ThermConzept" Type/Model: WW 1000/06/A Condition: Used Year of Manufacture: 2007 Technical Data Maximum Temperature: 650 °C Internal Dimensions (W x D x H): 1000 mm x 1000 mm x 1000 mm External Dimensions (W x D x H): 2200 mm x 1800 mm x 3200 mm Volume: 1000 l Power: 47.0 kW Voltage: 400 3/N V Weight: 1900 kg Gedpfx Amozpynqj Ajbr Inquiry Item: Transportation costs will be provided in a separate, customized offer.

Condition: ready for operation (used), Year of construction: 1998, An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Gbsdozpa R Eopfx Am Ajr

Condition: ready for operation (used), A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible. Godpfx Amoznc Rfj Asbr

Condition: used, Year of construction: 2008, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 4 units of electrically heated chamber furnaces, manufactured by Thermconcept. Type: KC 64/14 Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Gsdozmfvnjpfx Am Asbr Power: 15.0 kW Current consumption: 22 A

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Gedpfx Amszmamuo Aobr Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Important Pricing Information: We offer flexible terms to suit your needs. The standard price is €700,000. Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Furnace chamber made entirely of stainless steel, double-walled for water cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and servicing. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Gbsdozkwp Ijpfx Am Aer Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required

Condition: new, Year of construction: 2011, functionality: fully functional, PRESS HARDENING MACHINE Gbodpfx Amszkuaqo Ajr HEESS brand press, new, never used, year 2011, capable of hardening parts with a diameter of up to 750 mm.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, 1 FOUR-TUNNEL DRYING / DEBURRING / COOLING SYSTEM Brand: SAT - Automatic conveyor for trays holding your parts o Tray dimensions: L = 475, W = 325, H = 210 Godpfx Ajzkt Ugjm Ajbr o Payload: 80 kg o Maximum temperature: 150 °C o Electric heating o Ventilation o Heating length: 2620 mm (width 550, height 300) o Dwell time: 1 hour (adjustable) o Inlet and outlet airlocks on the oven A Attached: - Drawing - Description - Photos (more available upon request) Inspection possible in working condition in Northern Switzerland, near Lausanne.

Condition: new, Year of construction: 2024, machine/vehicle number: 240314081, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 850 °C, inner dimension length: 800 mm, inner dimension width: 1,200 mm, inner dimension height: 1,100 mm, total length: 1,170 mm, total width: 2,307 mm, total height: 2,420 mm, overall weight: 1,100 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, SAFTherm STDR-960-12A ANNEALING FURNACE price: 79,000 PLN + 23% VAT Gbedpjzkhy Dsfx Am Aor The SAFTherm STDR-960-12A annealing furnace was manufactured in 2024 in China by Henan Sante Furnace Technology Co., Ltd. The machine is designed for annealing steel at a maximum temperature of 850°C. Steel annealing is one of the heat treatment processes aimed at reducing internal stresses generated during the hardening process. This process involves heating the steel to a specific temperature below the eutectoid transformation temperature, maintaining it for a certain period, and controlled cooling. As a result, the steel exhibits increased resistance to cracking and higher impact toughness. The SAFTherm STDR-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. It features a large working chamber with dimensions of 800 x 1200 x 1000 mm, allowing for the processing of both individual parts and larger batches. The working chamber is equipped with high-quality thermal insulation, which reduces heat loss and stabilizes the temperature during operation. The system is completed by an intuitive SHIMADEN SRS10 controller, responsible for precise temperature control and programming the parameters of the annealing process. The SAFTherm STDR steel annealing furnace weighs 1100 kg. Technical data of the SAFTherm STDR-960-12A annealing furnace: - controller: SHIMADEN SRS10 - maximum operating temperature: 850°C - rated power: 75 kW - dimensions of the working chamber (length x width x height): 800 x 1200 x 1000 mm - power supply: 380 V; 50 Hz - dimensions (length x width x height): 1770 x 2307 x 2420 mm - weight of the SAFTherm STDR 960 12A machine: 1100 kg

Condition: used, Year of construction: 2013, Operational unit. Gbodpfszkg Nwjx Am Asr Ask for additional information!

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009702, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances in accordance with DIN 1539! 3 heavy-duty pull-out shelves included, each with a load capacity of 123 kg, full extension! - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Volume: 1500 liters - Tmax: 250°C - Controller: JUMO Imago 500 - Approved amount of solvent at Tmax: 250 g / 46 g - Exhaust air volume flow: 6 m³/min - Additional equipment: 3 pull-out grid shelves, each with a load capacity of 123 kg Gbsdpfjzivl Ssx Am Ajr 1 pull-out chip tray at the bottom, included Pass-through for e.g. thermocouples - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection is possible in our warehouse by appointment. We offer new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009701, functionality: fully functional, immediately available, very good condition, 12 months warranty With safety system for solvent-containing substances according to DIN 1539 -Internal dimensions w x d x h 1000 x 1000 x 1500 mm -External dimensions w x d x h 1765 x 1425 x 2615 mm -Capacity 1500 liters -Tmax 250°C -Controller JUMO Imago 500 -Approved amount of solvent at Tmax 250 g: 46 g -Exhaust air flow rate: 6 m³/min Gjdpfxjzivl Es Am Aebr -Optional equipment: 1 feed-through, e.g. for thermocouples Entry markings -Matching charging carts and trays available on request! -Connected load 26 kW -Net weight 1250 kg -Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse is possible by appointment. We offer new and used industrial ovens. Please contact us! Oven, industrial oven, drying oven, firing oven, heating oven, heating cabinet, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, curing oven, convection drying cabinet, solvent oven, chamber dryer, paint drying oven.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009703, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances according to DIN 1539! 3 heavy-duty pull-out shelves, each with a load capacity of 123 kg, full extension! -Internal dimensions w x d x h: 1000 x 1000 x 1500 mm -External dimensions w x d x h: 1765 x 1425 x 2615 mm -Volume: 1500 liters -Tmax 250°C -Controller: JUMO Imago 500 -Approved solvent quantity at Tmax 250°C: 46 g -Exhaust air volume flow: 6 m³/min Gbedpfxozivlrj Am Asr -Additional equipment: 3 pull-out grid shelves, heavy-duty, each with a maximum load capacity of 123 kg 1 pull-out chip tray at the bottom, included 1 feedthrough, e.g., for thermocouples -Connection power: 26 kW -Net weight: 1250 kg -Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection can be arranged at our warehouse. We carry new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, sintering oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm Gbjdpfx Aoziiutsm Aer 400 volts, 50 Hz, 6 kW Vertical air circulation via integrated fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing, RAL 7035 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Gjdpfxszhw Sdo Am Aobr

Condition: used, Year of construction: 1998, machine/vehicle number: 149280, Hardening furnace Item No. 26164 Technical data: - Nominal temperature / continuous temperature, infinitely adjustable up to 1200 °C Godpozg E I Defx Am Ajbr - Three-sided heating (bottom + sides) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Internal dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space required approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg