Ernwein Sarl

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Bdjdpjzx U S Njfx Afxeg Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2018, condition: used, Manual length adjustment via hand crank For attachment to any Elumatec single-head saw (right) Max. feed length: 3,000 mm Bdsdpfx Ajzx U Nnsfxsg

Year of construction: 2020, condition: used, Max. saw blade diameter: 280 mm Bdedpfxozx U Hmo Afxeg Pneumatic material clamps Rotatable table with locking points Minimum quantity spray device Like new condition Weight: approx. 160 kg

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm Bdjdpfx Aszx D Sfsfxog handheld control unit minimum quantity spraying 3 angle heads Profile length measurement at the head Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: C113962, including infeed roller table EMMEGI FERMO VIS 3780 DV and outfeed roller table Saw blade diameter: 400 mm Saw blade movement: Pneumatic, ascending Miter angle range: 15° left to 15° right Bdsdpozxil Rsfx Afxjg Max. cutting height: 140 mm Max. cutting width at 90°: 260 mm Saw blade arbor: 32 mm Motor power: 1.5 kW; 2800 rpm Material clamping: 2 pneumatic vertical clamps Required air pressure: 6-8 bar

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1612124593, Offer 26309 Technical Data: - Saw blade dimensions: 280 x 3.8 x 40 mm - Saw blade speed: 3200 rpm - Cutting range at 90°: approx. 100 x 70 mm - 200 x 40 mm Bdedpfjzw Datsx Afxeg - Miter angle adjustable: Left: 0 - 90° - Right: 0 - 45° - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 L/min - Drive: 400 V / 0.74 kW - Space requirement: approx. W 650 x H 1100 x D 750 mm - Weight: approx. 120 kg - Includes: - Pneumatic vertical clamping device - Pneumatic coolant spray device - Infeed roller conveyor: 2500 mm - Outfeed roller conveyor with stop and - Digital position indicator: 3000 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, Saw blade I, diameter/bore: 550 mm/50 mm Motor: 3 kW; 400 V; 2800 rpm Saw blade II, diameter/bore: 350 mm/40 mm Max. workpiece dimensions: 210 x 100 mm Motor: 2 kW; 400 V; 2800 rpm Vertical cutting height: 150 mm Swivel range of saw blade I: -70°/90°/45° Feed: Pneumatic, controlled by a two-hand system Air connection: 8 bar Operating manual: Available Bedpfx Afozwqu Roxodg Dimensions (width x depth x height): 1200 x 1000 x 1400 mm Weight: 480 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115687, Usable cutting length: 6000 mm Controllable axes: 3 Saw blade diameter: 550 mm Internal miter angle, electronic: 90° to 45° External miter angle, electronic: 90° to 15° Saw blade motor power: 2 x 2.64 kW Positioning speed, X-axis: 25 m/min Saw blade feed: Hydropneumatic Profile clamping: Pneumatic clamping devices Position measurement: Absolute magnetic measuring system Label printer with dispenser: Printing speed 60 mm/s Electrical connection: 400V / 3PH / 50Hz Bdodpfxszwm Adj Afxeg Total power: 7.5 kW Compressed air supply: Approx. 7 bar Weight: 1640 kg

Year of construction: 1995, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Bdedezvd Tkepfx Afxsg Pneumatic parking brake

Year of construction: 1995, condition: used, Max. saw blade diameter: 280 mm Pneumatic material clamps Bedpfjzvd N Ejx Afxodg Rotatable table with locking points Minimum quantity spray device Roller tracks and length stops available in different lengths on request

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand Bedjzu Azdjpfx Afxedg

Year of construction: 2009, condition: used, Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3-stage feed possible) Pneumatic material feed Pneumatic Sawing Feed Minimum quantity spray device Bdedpfxezuzmfs Afxsg Piece counter with shut-off automatic Digital display of conveyance length Cutting height quickly adjustable via 4-position selector switch Includes chip suction 800 kg

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm Bdodezupzqepfx Afxog BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3093-002, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, BJM FTB-100K – Automatic PVC Profile Cutting Center For sale: BJM FTB-100K automatic profile cutting center, designed exclusively for cutting PVC profiles. The machine does not have a milling function. The machine was previously used for cutting Kömmerling 70, 76 MD and 88 MD PVC profiles. The machine is currently packed and stored. It was taken out of production because a new machining center with milling capabilities was purchased. Bodpfx Aoztv Nfefxjdg Technical specifications Manufacturer: BJM Model: FTB-100K Year of manufacture: 2003 Machine No.: 3093-002 Power supply: 400 V, 3-phase Saw blade diameter: 500 mm Maximum profile width: 120 mm Maximum profile height: approx. 140 mm Cutting angles: 45°, 90° and 135° Number of saws: 3 Maximum profile length: 6,500 mm Minimum finished part length: 280 mm Input: XML cutting list files Labelling: Automatic label printing is available The machine is suitable for automated cutting of PVC window and door profiles and can process cutting lists supplied as XML files. The machine is sold as a used machine and is currently stored in packed condition.

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control Bsdpfxsztr Rre Afxsdg ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting length (max.): 6,250 mm, feed length X-axis: 6,250 mm, saw blade diameter: 500 mm, total length: 7,000 mm, total width: 1,100 mm, saw blade speed: 2,820 rpm, input voltage: 400 V, overall weight: 1,910 kg, For sale is an Emmegi Twin Electra Sun double miter saw in good, functional condition. The machine is ideal for the precise processing of aluminum, plastic, and similar profiles. Thanks to the programmable control system and numerous stored programs, it is well-suited for both individual custom pieces and series production. Technical data: * Manufacturer: Emmegi * Model: Twin Electra Sun * Year of manufacture: 1999 * Cutting length range: 350 to 6,250 mm * Double miter saw with automatic positioning * Various programs can be stored or are already available * Suitable for precise 90° and miter cuts Bodpoztkbvefx Afxedg The machine is in a ready-to-use condition and can be inspected and tested by appointment. Price: Negotiable

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ Bdedpfx Afeztc Dcexog The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: new, CNC double-head mitre saw equipped with Ø 600 mm saw blades, designed for precise and automated cutting of profiles. The machine features a robust electro-welded steel base and consists of one fixed cutting unit and one mobile cutting unit with electronic positioning along the X-axis. Both cutting heads are equipped with controlled rotary axes (RF and RM), allowing automatic positioning of the cutting units at angles ranging from 45° inward to 20° outward. The saw blades are operated by hydro-pneumatic cylinders, with adjustable feed speed and rapid return. Main features: CNC double-head mitre saw Ø 600 mm saw blades One fixed and one mobile cutting unit Electronic positioning of the mobile unit – X-axis Controlled rotation of both cutting heads – RF and RM axes Cutting angle range: 45° inward to 20° outward Hydro-pneumatic blade feed Adjustable blade feed speed Rapid blade return Horizontal clamping system with double cylinders Vertical profile clamping system Pneumatically operated safety guards for the cutting areas 15” touch-screen monitor Windows 10 platform Programming and management of cutting operations via touch-screen interface Bjdpfx Afeztb Hpoxsdg Provision for an industrial label printer for workpiece identification and association with the corresponding production order The machine is designed to provide precision, productivity and ease of operation, and can be easily integrated into the production process.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Oil-pneumatic blade feed Bjdpezr E S Tefx Afxjdg Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. Bjdpfx Afszrk Rbexodg * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Bodpfx Afozrhvujxsdg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Saw blades 500mm etc. Bdsdpfx Afozqu Egexjg

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Bedpozqbp Esfx Afxedg Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display Bdjdpezp Rnnofx Afxeg

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 - digital length stop Bdsdpfx Afjzm R U Noxjg - digital angle display - roller conveyor - dust extraction