Steindl

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer Giedpfx Aox Upu Tog Tol 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: used, Model: Spanavello brand moulding machine, 6+1 shafts, grooved bench, max. width mm.190 Shaft composition: below, right, left, right, above, below, universal, cardan shaft drive, used. Gjdpfex Tt Diex Ag Toil

Condition: good (used), Year of construction: 2017, In good technical condition. Year of manufacture: 2017. Suitable for dry deburring and disinfection of metal surfaces. Burr removal. Oxide removal on edges and surface finishing. Manufacturer: SCM Group spa Italy. Model: DMC M950. 400V, 71A. Machine weight: 2260 kg. Gedpfxox Ttn Ue Ag Teil

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 Gedpfxjx Ttbne Ag Tsil spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm working height: 160 mm feed: 4 kW

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change) Gisdsx Tplcepfx Ag Tsl

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right Gisdpsx Tphdofx Ag Tel - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2004, Four-side planer Martin T 90 Fully refurbished machine Year: 2004 Specifications: Working width: 260 x 160mm Spindle speeds: 6000 RPM Tersa cutterblock spindle 56 Amps 6 Bar Gisdpfex Tgu Isx Ag Tjl

Condition: used, Planer and Rabbetting automatic Weinig Unimat 23 for four-sided planing and profiling of woods with feeding magazine EM13 and groove bed. The machine is equipped for ripping (cutting) on spindle 6 and has metric ruler blanks cut from woods. Gisdpjx Tgb Usfx Ag Tel spindle: 6 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 130 mm

Condition: as good as new (ex-display), Year of construction: 2009, operating hours: 10 h, functionality: fully functional, REIGNMAC RMM 523, Four-Sided Planer/Moulder, Heavy and Robust. 1st Bottom Spindle, 7.5 kW, Automatic Star-Delta, Automatic Start Right Spindle, 7.5 kW, Automatic Star-Delta, Automatic Start Left Spindle, 7.5 kW, Automatic Star-Delta, Automatic Start Top Spindle, 7.5 kW, Automatic Star-Delta, Automatic Start 2nd Bottom Spindle, 7.5 kW, Automatic Star-Delta, Automatic Start Godpfxjx Tc Dle Ag Teil Planing width: 20 – 230 mm. Planing height: 10 – 160 mm. Automatic height positioning, feed beam with feed rollers operates synchronously. Automatic width positioning. Continuously variable feed speed (electronic) 6 – 30 m/min. Oil pump for table lubrication and an oil pump for the guideway lubrication. Dimensions approx. 3760 x 1730 x 1750 mm. Weight approx. 4000 kg.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Gsdpsx S U U Hsfx Ag Teil Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: refurbished (used), Shear machine Weinig brand model U22N, refurbished. 22 cm bench + faced bench 8 Trees with composition: lower, right, left, right, upper, lower, upper, universal Gisdpfxsx Syrks Ag Tel Automatic lateral advancement. Very versatile machine, suitable for both long pieces (with side loader) and short pieces (close-tow and grooved bed). Excellent degree of preservation.

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Gijdpfjx Syq Tox Ag Tol Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations) Giodox Syk Hspfx Ag Tel

Condition: excellent (used), CATALOG NUMBER 7244 TECHNICAL DATA - max working width: 800 mm - max working thickness: 160 mm Top side: - smooth feed roller - anti-kickback fingers - segmented, toothed, feed roller (allows simultaneous planing of multiple elements) - 2 pressure rows - segmented, toothed, feed roller (sequential, sectional) - pressure unit - planing shaft 810 mm, 4 knives, 18.5 kW - pressure unit - smooth, metal feed roller Bottom side: - adjustable infeed table with smooth roller - smooth feed roller - planing shaft 810 mm, 4 knives, approx. 10 kW Giedpfx Agex Sykao Tol - 2 smooth, metal feed rollers, adjustable - metal, smooth feed roller - electric table elevation - stepless feed speed regulation 7–40 m/min - motor approx. 2.2 kW - extraction port diameter 200 mm / 180 mm - dimensions (L x W x H): 1950 x 2100 x 1700 mm - weight approx. 2500 kg – manufactured in the Czech Republic – very good condition – used planer Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Giedpfx Ajx Syhxjg Tel Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads Gsdpjx Syblsfx Ag Toil – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration Giodpox Syazofx Ag Tjl – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW Giedpjx Sxxvefx Ag Tjl 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,400 h, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Weinig Powermat 500 Four-Sided Planer and Moulder for planing and profiling solid wood on four sides. The machine features CNC control and the proven PowerLock quick-change system. Additionally, it is equipped with an automated return mechanism for the planed workpieces, ensuring optimum suitability for efficient production processes. Machine Configuration - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable length: 2.5 m (including straightening ruler) Top pressure rollers, spring-loaded Side pressure, pneumatically actuated Gedex Sxfvspfx Ag Teil Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller spacing between feed elements (400 mm) Additional feed rollers and shortened roller spacing Durofer steel feed roller, self-cleaning Infeed roller before the first bottom tool, pneumatically actuated Siemens/Powercom control system The machine is in very good and well-maintained condition, has been professionally operated and serviced regularly, and will remain in operation until 17.12.2026. Viewing of the machine in operation is possible by appointment at any time. The technical description as well as the layout drawing of the machine can be found in the documents.

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm Gsdpfex Sw T Sjx Ag Teil 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: excellent (used), CATALOG NUMBER 7133 TECHNICAL SPECIFICATIONS - max. working width: 220 mm - max. working height: 120 mm – 5 spindles: 1) bottom horizontal – 220 mm, 5.5 kW Gjdpfx Agjx Swx Uo Teil 2) right vertical – 120 mm 3) left vertical – 120 mm; spindles 2 and 3, 11 kW each 4) top horizontal – 220 mm, 11 kW 5) bottom horizontal – 220 mm, 5.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm - pneumatic pressure rollers - 4 driven, gear-feed rollers from above, including 2 double - 1 double outfeed roller from above, smooth, rubber-coated - 1 outfeed roller from below, rubber-coated - feed via Cardan shafts - adjustable feed speed - feed motor: 2.2 kW - lifting motor: 0.25 kW - electric thickness adjustment - infeed table length: 1970 mm - central lubrication - extraction port diameter: 4x120 mm, 1x140 mm - dimensions (LxWxH): 3500x1550x1400 mm - weight: 1750 kg ADVANTAGES – with 5 cutter heads – German-made – original paint (not repainted) – used planer, in very good condition Net price: 48,900 PLN Net price: 11,640 EUR (depending on 1 EUR = 4.2 PLN) (Prices may change based on currency fluctuations)

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation Godpfx Aox Swxheg Tsil – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary due to exchange rate fluctuations)

Condition: used, Planer- and edge jointing machine Weinig Guilliet KXY for four-sided planing of wood in very good original condition and incl. Planer heads. Sample image spindle: 4 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs working width: 180 mm Gsdpex Sv Rvjfx Ag Toil working height: 120 mm

Condition: good (used), Feed conveyor for four-sided planer with hydraulic drive TECHNICAL SPECIFICATIONS Gsdpfx Agex Svn Io Tsil Working width: 300 mm Working height: 200 mm 6 infeed chains for material handling Hydraulic feed drive Feed speed: 60 m/min

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Godpfx Aox Svm Rsg Tjil 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.