Ralf Teichmann GmbH

Condition: good (used), functionality: fully functional, Year of construction: 2011, load capacity: 200 kg,

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. Ijdpfxoz Tdfts Ap Deih The crane is disassembled and immediately available. Very good condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN231, ABUS ZHB overhead crane system with dimensions approximately 7.8 x 6 m (6 m span) Load capacity / lifting capacity: 500 kg - 0.5 tons Technical data of the system: Crane system consisting of ABUS HB200 rails with 2 drive units System is delivered complete: HB rails, rail connectors, trolleys, drive units, end plates, supports/hangers, etc. including 500 kg ABUS chain hoist Length of steel structure: approximately 8.5 m Overall width (outer edge of steel structure): approximately 5.2 m Total height of crane: approximately 4.87 m Top of rails: approximately 4.3 m Bottom of rails: approximately 4.08 m Top of bridge: approximately 4.02 m Bottom of bridge: approximately 3.81 m Hook height: approximately 3.7 m Supports: HEB120 with 40x40 cm base plates, rails: INP260 Crane is disassembled and available immediately Used condition, see pictures Iodpfoz Tddcox Ap Djih Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Isdpsz Tdb Usfx Ap Doih Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane incl. steel structure with floor control. Steel structure dimensions approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m. Isdpoz Tdbnofx Ap Doih Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB300 beams (running rails) with 8 U240 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Total height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 – center to center) System is delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor control Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: DN-ZLK-5to, ABUS ZLK Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor control Dimensions of steel structure approx. 12.5 x 19m with 1x Abus double-girder bridge crane 5.0 tons - gauge 11.75m Useful load/lifting capacity 5000KG Technical data of the system: Crane track/steel structure consisting of 4 HEB300 beams (running rails) with 6 supports HEB300 Beams were cut flush with the floor, as they were embedded in concrete. Isdpfx Apsz Tda Ds Doih Length of steel structure approx. 19m (2x 8.5m) Overall width outer edge (steel structure) approx. 12.5m Total height of crane approx. 5.7m (top of hoisting unit) Top of running rails approx. 4.81m Bottom of running rails approx. 4.43m Top of bridge approx. 5.5m Bottom of bridge approx. 4.66m Hook height approx. 4.4m Gauge 11.75m Support spacing: See sketch (Left 8.9m + 8.9m - center to center) System is delivered complete: Steel structure / supports made of HEB300 beams, running rails HEB300 incl. power rail/power supply 1x double-girder crane with 5000kg Abus wire rope hoist with floor control Crane is disassembled and available immediately The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or collection only by appointment.

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: TD2002/0368, DEMAG KBK overhead crane system with dimensions approximately 9x4m (4m span) Load capacity / lifting capacity: 800kg - 0.8t Technical data of the system: Overhead crane system with Demag KBK2 rails Isdpjz Tc Nwsfx Ap Doih System is delivered complete: KBK rails, rail connectors, carriages, end plates, supports/hangers, etc. Includes 1 bridge with a load capacity of up to 1000kg Includes 800kg Demag DK chain hoist Crane is disassembled and immediately available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by prior appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125kg - 1600kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/1, DEMAG KBK overhead crane, track system, dimensions approximately 8x4m – expandable on request!! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Iijdpez Tc Nqofx Ap Doh Crane track made of Demag KBK2 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. incl. Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with an outreach of approximately 3m Crane is dismantled and immediately available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your desired crane track with load capacity and dimensions.

Condition: used, functionality: fully functional, Year of construction: 1996, machine/vehicle number: ROD397XX/999, DEMAG KBK overhead crane with dimensions of approximately 22 x 5 m (2 x 5 m span) Load capacity / lifting capacity: 2 x 250 kg – 0.25 tons Technical data of the system: Overhead crane system with Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Including 2 bridge cranes, each with a capacity of 250 kg Including 2 x 250 kg Demag DK+DC chain hoists (the latter is a more recent model) The crane is disassembled and immediately available Used condition, see photos Item location is 75053 Gondelsheim Iisdez Tc D Iepfx Ap Doh Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please feel free to request a quote for your overhead crane, specifying the load capacity and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: ROD391, Technical specifications: 1x Demag KBK 1 pillar slewing crane, NL 80KG, with Abus chain hoist, manufactured in 2021 Load capacity at full outreach: 80KG Height: approx. 3.65 m (pillar 3.05 m + pillar extension) UK jib length: approx. 3.1 m Outreach: 5 m Hook height: approx. 2.7 m Total weight: approx. 400KG with 80KG Abus GM chain hoist, manufactured in 2021 including bolts, cable carrier, trolley, end cap, etc. Iedez Tcv Djpfx Ap Dsih Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000KG, please inquire See pictures Shipping via freight forwarder or collection only by prior arrangement

Condition: used, Year of construction: 2000, Abus wall-mounted swing jib crane, type VS, load capacity 2000 kg, outreach 6000 mm, swiveling 180° with motor. Trolley electrically movable. Lifting with 2 speeds. Annual maintenance performed, with crane logbook. Ijdpfx Apoz S T Tqj Deih

Condition: good (used), Year of construction: 2008, machine/vehicle number: 152-007509, Offer 26320 Technical data: - ABUS electric chain hoist - Load capacity: 2000 kg - 2 lifting speeds: 1.0 / 4.0 m/min - Control of the chain hoist via hand-held remote control - Manual pivoting of the boom and manual traversing of the electric chain hoist Iedpfxoz S H Dcj Ap Djih - Outreach: approx. 5000 mm - Lifting height: approx. 2200 mm - Swivel radius: approx. 360° - Column diameter: approx. 400 mm - Boom: IPE 550 - Lower edge of boom: approx. 2850 mm - Overall height: approx. 3400 mm - Total weight (column - boom - chain hoist): approx. 1500 kg - Inspection certificate

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152-010 564, Offer 26317 Technical data: - Electric wire rope hoist ABUS, operation via floor-mounted remote control - Load capacity 3200 kg - Lifting speeds 0.7 / 4.0 m/min - Motorized trolley travel speed 5.0 / 20.0 m/min - Motorized slewing speed 0.15 / 0.61 RPM - Outreach 5000 mm - Hook height approx. 3000 mm - Bottom edge of boom approx. 3690 mm - Boom IPE 550 - Overall height approx. 4300 mm - Column diameter approx. 540 mm Iodpfx Apez S H Alj Dsih - Slewing radius 360 ° - Power supply 400 V - Total weight approx. 2000 kg

Condition: excellent (used), overall weight: 500 kg, total height: 1,900 mm, total length: 3,400 mm, total width: 1,000 mm, load capacity: 2,000 kg, Arm length 3000 mm Column diameter 406 mm Lifting capacity 2000 Kg Rotation speed 550 / 2660 U/Min Capacity Kg:2 ton Length: 3400mm Width: 1000mm Height: 1900mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iisdpsz Sppusfx Ap Doh

Condition: excellent (used), Original PFEIFER Seil- und Hebetechnik lifting beam, designed for lifting and moving heavy loads. Technical specifications: Manufacturer: PFEIFER Isdpfxoz Spcdj Ap Doih Type: 04.315.063.031 Serial number: 7703 Load capacity: 6300 kg / 6.3 t Overall length: 325 cm Weight: 223 kg Year of manufacture: 1990 Adjustable mounting points Lifting hooks on both sides

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. Ijdpez Sn Ddofx Ap Deih For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Iisdpsz Sm Txsfx Ap Djh Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) Iodpfxjz Smw De Ap Djih ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: used, functionality: fully functional, Year of construction: 1991, load capacity: 3,200 kg, main lifting speed: 50 mm/min, fine lifting speed: 32 mm/s, throat depth: 18,560 mm, working height: 6,000 mm, DGUV certified until: 09/2025, Equipment: documentation/manual, 3x ABUS single-girder overhead crane ELK 3.2 t – span 18,560 mm – lifting height 6 m Manufacturer / Model: ABUS / ELK (single-girder overhead crane) Year of manufacture: 1985 / 1988 / 1991 Iijdoz Smctjpfx Ap Deh Condition: used, operational Location: 79232 March-Hugstetten Price: €7,800 per crane, negotiable, plus VAT Description: ABUS single-girder bridge crane with a span (center-to-center distance) of 18,560 mm ± 10 mm, load capacity 3,200 kg. The crane was used in an indoor hall. It was delivered and commissioned as a new unit in 1988/89. Technical data of the crane Load capacity: 3,200 kg Span: 18,560 mm Classification: DIN 15018 H2/B3, drive group 1Am (DIN 15020) Crane travel: 40 / 10 m/min (2 speeds), 2 travel motors Crane wheel: 4 pieces, Ø 160 mm Max. wheel loads (net): 24.6 / 24.7 kN Total weight including trolley: 3,640 kg Paint: RAL 6011 reseda green Hoist / Trolley ABUS electric chain hoist GM 1032 F6-201.41.062.E Hook travel: 6,000 mm Lifting speed: 5.0 / 0.8 m/min (slow / fast lifting), 3.2 / 0.45 kW Trolley travel: 20 / 5 m/min Wire rope: Ø 7 mm, 1,770 N/mm², minimum breaking force 38.3 kN Trolley weight: 330 kg Electrical system / Safety Operating voltage: 400 V (380 V) / 50 Hz, control voltage 220 V Connected power: 4.3 kW Pendant control with its own, independently movable control unit Overload protection Emergency stop switch Load hook twist protection Disc brakes on all drives, protection class IP 54 Power supply to the trolley via festoon cable Documentation available: overview drawing, data sheet, master data sheets for crane and trolley, wire rope certificate, and the protocol of the initial inspection and acceptance (test load approx. 4 t). Scope of supply: crane bridge with head beams, travel drives, trolley/hoist, control system and festoon cable. Dismantling: by arrangement Inspection possible by appointment.

Condition: excellent (used), For sale: 250kg crane + Demag winch. In very good condition. - Overall length: 185cm / working length: 140cm. Ijdpfx Ajz Sk S Ssp Doih - Height: 278cm.

Condition: excellent (used), Year of construction: 2013, For sale: a complete travelling crane with an electric chain hoist from the renowned Stahl brand, with a lifting capacity of 1000 kg. The set was manufactured in 2013. The set is fully functional and ready for further operation. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – a robust, reliable unit * Drive type: electric, chain * Total length of the crane: 1046 cm (10.46 m) * Stable load-bearing beam + cable and power supply guides Iijdpjz Sk S Ejfx Ap Dsh * Can be inspected on site – it was used in a clean production hall The crane is in very good technical condition – well-maintained and ready for use. Ideal for a workshop, industrial plant, warehouse, or tool shop.

Condition: excellent (used), Year of construction: 2016, For sale: Aluminum gate hoist, mobile Porta Gantry model, 250KG capacity, 2016, in very good condition. Iisdpfx Apjz Skq Uj Djh

Condition: not inspected (used), Wall-mounted jib crane, manufacturer: Zasche, load capacity: 500 kg, outreach: 3,000 mm, with 1 electric chain hoist, manufacturer: Gis, load capacity: 5,500 kg, floor-level operation. Iisdpfx Apsz R Ntrj Deh

Condition: not inspected (used), Column-slewing crane, manufacturer: Demag, load capacity: 500 kg, outreach: 3,000 mm, with electric chain hoist, manufacturer: Demag, load capacity: 500 kg, floor-level control. Includes 1 storage table, steel/wood construction, with 1 mounted vise, jaw width: 120 mm. Iodpez R Nddjfx Ap Djih

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 112781, overall weight: 8,000 kg, total height: 1,300 mm, total length: 24,300 mm, total width: 4,000 mm, load capacity: 6,300 kg, working height: 8,000 mm, Equipment: documentation/manual, Konecranes 6,300 KG single-girder overhead crane. - Span: 24,160 mm center-to-center. - Lifting capacity: 6,300 KG - Lifting height: 8 m - Year of construction: 1998 - Control: wired - Crane manual: available Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email us if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl Iodpfsz Rmm Iox Ap Deih