Bystronic Benelux B.V.

Condition: used, Year of construction: 2018, Opportunity to purchase this LVD fiber laser with 3000W laser output and 9500 working hours. Can be inspected in operation upon appointment. Kdsdpfx Aoy Tx Hisb Uol Availability: on request Working dimensions: 3000 x 1500 mm Laser output: 3000W Working hours: 9500

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Kodpfjy Tm Dpsx Ab Uodl Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Kdedpfsy Sgmnjx Ab Uel

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen Kdjdpfx Abjy R Sc Es Uel :- Cab lighting

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 41,500 h, control type: CNC control, controller manufacturer: SIEMENS, sheet thickness steel (max.): 8 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 60 m/min, cutting speed: 1,200 mm/min, overall weight: 18,000 kg, total length: 7,600 mm, total width: 7,000 mm, total height: 2,500 mm, TRUMPF TRUMATIC 5000 punching machine, large format, in perfect technical condition. Kdsdpfx Abey Rh E Nj Usl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 11,360 h, machine/vehicle number: 1115000189 7, table length: 400 mm, table width: 300 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, table load: 50 kg, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis (focusing axis): 500 mm Kjdpfey N N Ivex Ab Uedl Rapid traverse X/Y/Z: 20 m/min Acceleration: 0.3 g Table size: 400 mm x 300 mm Table load capacity: max. 50 kg MACHINE DETAILS Laser type: Nd:YAG (lamp) / Nd:YVO4 (diode) Average laser power (lamp): 100 W Average laser power (diode): 15 W Laser spot diameter: approx. 0.03 mm Laser area: 60 mm x 60 mm Weight: 2,200 kg Voltage: 400 V Operating hours Cutting hours: 11,360 h Power-on hours: 45,628 h

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 41,569 h, machine/vehicle number: 77510200, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC 3i, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser source model: C4000, laser hours: 41,569 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ✅ Auction until May 29, 2026, 12:00 PM. Dismantling and removal will take place at the beginning of June. On behalf of an authorized party, we are offering the following used item for sale via auction: Amada CO2 laser cutting machine, model FO-3015 NT II RI Laser machine FO-3015 II RI FOM2RI3015-C4 Operating hours: 41,569 h Laser specifications: 4000 W CO2 laser / Flying optics Travel range (X x Y): 3070 x 1550 mm Control system: AMNC 3i (21.5" screen size) Serial number: 77510200 Year of manufacture: 2013 including transformer TG513 Serial No. 987 including chiller-extraction unit combination PC5011FOm24kw Serial No. 7196850001 LST3015 RI pallet changer for FOM23015RI LSTRI3015-CL Serial numbers: (30153398) Kodjy Iwixspfx Ab Ujdl Water demineralization unit, type B5 31164908 with cartridge and conductivity meter Other condition information: Last maintenance by Fanuc: January 5, 2023, at 38,095 hours Replacement of the O-rings of the laser tube Replacement of the internal mirrors Turbo blower replaced at 24,000 hours Next replacement due at 48,000 hours RI unit: pneumatic valves partially leaking, inspection required including various light barriers and a safety fence for the loading and unloading area Price is for pickup. The item is located in Erftstadt and must be picked up by the buyer. This offer applies exclusively to the item described. Other items that may be depicted here are possibly part of a different offer. Subject to errors. Inventory number: 2893-82

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 20,000 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser power: 4,000 W, AMADA LC 3015 X1 NT – Laser Cutting Machine for Sale For sale: A used CO₂ laser cutting machine, manufacturer Amada, model LC 3015 X1 NT. This reliable, industrial-grade solution from the renowned Japanese manufacturer is ideal for high-precision cutting of steel, stainless steel, and aluminium sheets. General Information Year of manufacture: 2008 Operating hours: approx. 20,000 h Laser power: 4 kW Working Range and Traverse Speeds X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis stroke: 120 mm Max. rapid feed X/Y: 85 m/min Kdjdpfx Aboy Hxy Ns Usl Max. rapid feed Z: 60 m/min Max. workpiece weight: 730 kg Cutting Capacities Mild steel: up to 20 mm Stainless steel: up to 15 mm Aluminium: up to 12 mm Included Equipment - Donaldson filtration system - Sheet material storage (without shuttle table) Dimensions and Weight Approx. dimensions: 6,670 × 2,360 × 2,100 mm Total weight: 11,700 kg Why Choose This Machine? The Amada LC 3015 X1 NT is a true workhorse for sheet metal fabrication. The spacious 3 × 1.5 m working area accommodates standard sheet formats in a single setup, and the built-in sheet storage optimizes material flow and reduces manual loading efforts. The robust 4 kW laser source ensures reliable cutting of thicker materials, while the Donaldson filtration system maintains a clean working environment. Delivery and Inquiries The machine is offered as is. Further details, photos, and quotes for dismantling, transport, and potential commissioning are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and ready for production. Ideal for automotive, aerospace, and general metalworking applications requiring precise 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed upon inspection) Operating hours: 70,000 hours total / 41,125 hours beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively performed by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 employees, 12 million euros in revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose the one that fits your project: Module Scope M1 – Ex Works: Pick-up at our site, loaded onto your truck. Machine tested before handover. For buyers with their own rigging and installation capabilities. M2 – Delivered: M1 + international transport, insurance, and unloading at your facility (DAP/DDP on request). For buyers with an internal installation team. M3 – Delivered & Installed: M2 + mechanical installation, utility connection, first power-up, laser alignment. For buyers without dedicated installation resources. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. For buyers who want the machine producing from day one. Ksdpfx Abjy E Iv Ro Uodl On-site inspection and sample cuts on your own parts are available at our facility in France prior to purchase.

Condition: used, Year of construction: 2018, Excellent Bystronic fiber laser with 8000W laser output and ByTrans cross automation. Viewing possible upon appointment. Availability: Aug-Sept 2026 Working dimensions: 3000 x 1500 mm Laser output: 8000W Kedpfxoy Eqk Io Ab Usdl Power on hours: 32.249 Cutting hours: 11.594 Automation: By Trans Cross

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,500 h, machine/vehicle number: A1240A0666, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 2,000 m/min, overall weight: 14,500 kg, total length: 12,000 mm, total width: 5,300 mm, total height: 2,200 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TRUMPF TruLaser 3040 (L32) laser cutting machine with 4000 W power, year of manufacture November 2019, the machine has been in use only since 2020. The machine is in very good condition, fully operational, and has been serviced regularly every 6 months by an authorized service provider. Technical data: TRUMPF TruFlow CO2 laser - max. power TruFlow 4000 (programmable in 1% increments): 4000 W Working area: X axis: 4000 mm Y axis: 2000 mm Z axis: 115 mm Maximum sheet weight: 1800 kg Dimensions and weight: Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,500 kg TRUMPF CNC control system based on Siemens Sinumerik 840D: Maximum mild steel thickness: 20 mm Maximum stainless steel thickness: 15 mm Maximum aluminium thickness: 10 mm Gas consumption: Laser gas CO2: 1 l/h Laser gas N2: 6 l/h Laser gas He: 13 l/h Kdedpfxoy D Ryvo Ab Ujl Cutting gas: O2, N2 depending on application Laser cooling: closed-loop system Total device power consumption (including cooling unit): with TruFlow 4000 – max. 61 kW Compressed air consumption: with TruFlow 4000 – 31 Nm³/h Paint - color: Fixed machine parts, extraction, control cabinets, cooling unit: blue - RAL 250 20 20; frame crossbeam and laser unit: white - NCS S 0505 R80B.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,000 h, controller model: BySOFT, laser power: 2,200 W, travel distance X-axis: 1,562 mm, travel distance Y-axis: 772 mm, travel distance Z-axis: 100 mm, TECHNICAL DETAILS X-axis travel: 1,562 mm Y-axis travel: 772 mm Z-axis travel: 100 mm Material thickness (iron): 15 mm Rapid traverse X-Y-Z: 100 - 100 m/min Ksdoy D Iklepfx Ab Uodl Working area: 1,500 x 3,000 mm MACHINE DETAILS Control unit: BySOFT Laser source: Bylaser 2200 Laser power: 2,200 W Weight: 13,500 kg Operating hours: 15,000 h

Condition: not inspected (used), functionality: not functional, Rofin DC 025 industrial CO₂ slab laser resonator Manufacturer: Rofin Type: DC 025 Operating capacity: unknown Kjdpfx Abjy Dubde Usdl Rated power: 2500 W Power range: approx. 250 – 2500 W Laser type: CO₂ slab (diffusion cooled) Excitation: radio frequency (RF) Operation: continuous (CW) + pulse mode Beam parameters Wavelength: 10.6 µm Beam diameter: < 25 mm Beam quality (K factor): > 0.8 Divergence: < 0.5 mrad Stability: ±2% (within 24 hours) Dimensions (L × W × H): approx. 1700 × 800 × 850 mm Weight: approx. 500 kg

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, laser source manufacturer: Laserline, laser source model: LDF 16000-100, laser hours: 100 h, laser power: 16,000 W, type of cooling: water, Equipment: cooling unit, We are offering this as-new Laserline LDF 16000-100 laser unit including chiller, year of manufacture 2022. The unit has approximately 100 operating hours. Manufacturer: Laserline Laser model: LDF 16000-100 Laser year of manufacture: 12/2022 Kedpjy Axbrefx Ab Uedl Chiller model: CHW40 + HPOC Chiller year of manufacture: 12/2022 Hyfra chiller model: SIGMA42-S-P Hyfra chiller year of manufacture: 2022 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Kdedpfx Ajyztchjb Usl Laser power: 4.4 kW Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Table length and width: 3000/1500 mm Cutting area -x/-y: 3000/1500 mm Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 12,992 h, laser power: 80 W, travel distance X-axis: 740 mm, travel distance Y-axis: 520 mm, overall weight: 8,000 kg, number of axes: 3, This 3-axis 4JET Pearl M fiber laser cutting machine was manufactured in 2020. It features a maximum laser output of 80 W and a base area of 2400 x 2620 mm, making it suitable for various cutting applications. The machine includes an ASD 300 extraction unit and a variable control panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the 4JET Pearl M machine we have for sale. Contact us for further details. • Wavelength: 1064 nm • Laser Output (Max): 80 W • Measured Laser Power (max): 80 W • Pulse Energy (Max): 1.5 mJ • Voltage: 400 VAC (3P/N/PE) • Frequency: 50/60 Hz • Nominal Current: 63 A • Base Area: 2400 x 2620 mm • Total Weight: approx. 8 t • Area Load: 2 t/m² • Point Load: 1 t (8 feet) • Substrate Holder Sizes: 740 x 520 mm or 370 x 520 mm • Compressed Air: 6 bar, average flow 35 l/min • Exhaust Air (Filtered): H13 filter class • Included component: Variable control panel Kedpfx Aoyzn A Njb Uedl Additional equipment • ASD 300 extraction unit • Spare parts package: • Mirror/Spiegel 25,4mm (Art.-Nr. 16149) – Menge: 3,00 Stk. • Lens-/Linse f=75 mm (Art.-Nr. 16150) – Menge: 1,00 Stk. • Lense / Linse, f = -30 mm (Art.-Nr. 16151) – Menge: 1,00 Stk. • rhothor smart deflector with Y-mirror (Art.-Nr. 16152) – Für Apertur 15mm; SiC; Wellenlänge 532nm; Menge: 1,00 Stk. • rhothor™ smart deflector with X-mirror (Art.-Nr. 15444) – Für Apertur 15mm; SiC; Wellenlänge 532nm; Menge: 1,00 Stk. • Lense / Linse f=100.0 mm (Art.-Nr. 16153) – Menge: 1,00 Stk. • Notch Filter Ø25 mm (Art.-Nr. 16154) – Menge: 1,00 Stk. • Mirror / Spiegel Ø1" Protected Silver (Art.-Nr. 16155) – Menge: 1,00 Stk. • Mirror/Spiegel 2" HR532/45 PW2037C flat (Art.-Nr. – Menge: 3,00 Stk. • beam expander / Strahlaufweiter (Art.-Nr. 13487) – Menge: 1,00 Stk. • Lense F-Theta f 100mm / Linse F-Theta f 100mm (Art.-Nr. 15145) – Menge: 1,00 Stk.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. Kedpoyy Nrvefx Ab Uedl * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER 1500x3000mm / 1500x4000mm / 2000x4000mm / 2000x6000mm / 2500x6000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, documentation/manual, * The MASTER series fiber laser cutting machines deliver high cutting performance, thanks to their robust frame construction and compatibility with power sources up to 30 kW. * Equipped with an automatic, rear-exchange dual shuttle table. * The standard configuration of the MASTER includes a rear table exchange system and the option to integrate automated loading and unloading systems. * Customizable cutting areas are available. * Working ranges: 1,500x3,000 mm / 1,500x4,000 mm / 2,000x4,000 mm / 2,000x6,000 mm / 2,500x6,000 mm. * Available with Raycus, MaxPhotonics, and IPG resonators. * Compatible with Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC control units. * Enhanced usability with a 21.5'' touchscreen interface. * Compliant with CE standards. * Can be equipped with fiber laser sources ranging from 2 kW to 30 kW. * User-friendly design ensures easy access to the cutting area. * Rigid, monoblock, welded steel frame with heat treatment ensures high durability and mechanical stability. Kdjdpfx Ajyy I N Heb Ujl * Aluminum bridge design provides added rigidity and excellent dynamic performance. * Designed for energy efficiency with low power consumption. * Remote service capability. * Automatic lubrication system included. * As design and manufacturing are performed in-house, customization according to customer-specific requirements is possible.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE PLUS 1500 x 3000mm / 1500 x 4000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * Raycus, MaxPhotonics, and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touchscreen for high ease of use. * Dual table cutting system with side loading and motorized table exchange. * Occupies 40% less floor space compared to a standard fiber laser cutting machine. * Easy and cost-effective transportation. * CE compliant. * Compact design with a transverse, removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 12kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. * User-friendly and provides easy access to the cutting area. * Rigid, monoblock, welded steel body and robust machine structure, thermally stress-relieved. Kdjdpfjyy Iyrox Ab Ujl * Aluminum gantry design for increased rigidity and high dynamic performance. * Energy-saving with low power consumption. * Remote service capability. * Automatic lubrication system. * Customized production available according to specific client requirements, as both design and manufacturing are carried out in-house.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE 1500 X 3000 / 1500 X 4000, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, * Raycus, MaxPhotonics and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC. * High user convenience with a 21.5'' touchscreen display. * Occupies 40% less floor space compared to a conventional fiber laser cutting machine. * Easy and cost-effective transportation. * CE conformity. * Features a compact design and a transverse removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 6kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. * User-friendly, with easy access to the cutting area. * Thermally treated, robust, monoblock welded steel frame for enhanced rigidity. * Aluminum bridge design provides increased strength and high dynamic performance. * Energy saving through low power consumption. * Remote service capability. Kdjdpfx Ajyyxpqob Ujl * Automatic lubrication system. * Production according to customers’ special requirements, as both design and manufacturing are carried out in-house.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser power: 3,000 W, New Senfeng SF1313G 3 kW Laser Cutting Machine for Sale Precision Laser Cutter for Metal, Acrylic & Plastics – Available Immediately We offer a used Senfeng SF1313G laser cutting machine with 1.5 kW for sale. The machine is fully operational, reliable, and ideally suited for processing metal, acrylic, and plastics – perfect for companies, workshops, or start-ups looking for a CNC laser cutter. Thanks to its compact design and powerful laser, the SF1313G is ideal for precise laser cutting and a variety of industrial applications. Technical specifications & features Machine attributes Manufacturer: Senfeng Model: SF1313G Power: 3 kW Type: CNC laser cutter / laser cutting machine Materials: Metal Condition: used, inspected, fully functional Advantages of the Senfeng SF1313G - Precise laser cutting for various materials - Easy operation & reliable performance Kdsdpsyxf Rlefx Ab Uel - Ideal for industry & trades - Compact design, easy to integrate into workshops Why choose this laser cutter? - Used, but fully functional: Ready for immediate use - Industrial quality: For precise metal processing - CNC control: Accurate and repeatable results - Versatile: Suitable for workshops, start-ups, small batch production - Regionally available: Located in Thuringia / fast pick-up possible --- Model Overview SF1313G MAX 3000W Laser Cutting Machine Features: - High-strength machine bed - Fully automatic focus - High-strength aluminium alloy beam - Intelligent following system G·Classic Series Technical Parameters (SF1313G) 1. Work area: 1300×1300 mm 2. X-axis travel: 1300 mm 3. Y-axis travel: 1300 mm 4. Z-axis travel: 100 mm 5. X/Y positioning accuracy: ±0.05 mm 6. X/Y repeatability: ±0.02 mm 7. Maximum speed: 80 m/min 8. Maximum acceleration: 0.8 G 9. Total weight: 1870 kg 10. Maximum load: 220 kg 11. Dimensions: 2985×2160×2000 mm 12. Phase: Three-phase 13. Voltage: 380 V 14. Frequency: 50 Hz 15. Protection class: IP54 Cutting Parameters (Stainless Steel + Carbon Steel) Stainless Steel: 1 mm – 30-45 – N2/Air 2 mm – 20-25 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6 – N2/Air 6 mm – 2-3 – N2/Air 8 mm – 1-1.5 – N2/Air 10 mm – 0.5-1 – N2/Air 12 mm – 0.4-0.6 – N2/Air Carbon Steel: 1 mm – 30-40 – Air/N2 2 mm – 15-20 – Air/N2 3 mm – 3.5-4.5 – O2 6 mm – 2.5-3.5 – O2 8 mm – 1.8-2.3 – O2 10 mm – 1.4-1.8 – O2 12 mm – 1.0-1.4 – O2 14 mm – 0.8-1.0 – O2 16 mm – 0.7-1.1 – O2 20 mm – 0.5-0.7 – O2 Cutting Parameters (Brass + Aluminium) Brass: 1 mm – 25-30 – N2/Air 2 mm – 12-17 – N2/Air 3 mm – 5-6 – N2/Air 4 mm – 2-3.5 – N2/Air 5 mm – 1.8-2.5 – N2/Air 6 mm – 0.8-1.0 – N2/Air Aluminium: 1 mm – 30-35 – N2/Air 2 mm – 14-20 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6.5 – N2/Air 5 mm – 2.5-3.5 – N2/Air 6 mm – 1.2-1.5 – N2/Air 8 mm – 0.7-1.3 – N2/Air Warranty – 2 years

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 57,467 h, machine/vehicle number: 30003596, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: Bylaser 4400, laser hours: 57,467 h, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, power: 62 kW (84.30 HP), input voltage: 1,200 V, input current: 125 A, input frequency: 50 Hz, Equipment: CE marking, Bystar 3015 laser cutting system from Bystronic. All maintenance has been properly carried out by Bystronic and is up to date. The machine is ready for operation and still in use. Includes automation with Bytrans 3015 (year of manufacture 2006). Includes cooling unit. Includes filtration system. Includes 5-inch and 7.5-inch cutting heads. Includes accessories such as lenses, nozzles, etc. Kodpfx Abeyxcvfo Usdl

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: CypCut, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 3000W, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 80 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning speed: 80 m/min, positioning accuracy: 0.02 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,700 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Fiber laser cutting machine 3000W 1500×3000 is a modern CNC device designed for precise metal cutting in industrial applications. Thanks to the use of an efficient Raycus laser source and the advanced CypCut control system, the machine ensures high accuracy, repeatability, and ease of operation. Its solid, welded and stress-relieved structure guarantees operational stability and resistance to deformation, resulting in long service life and reliability. The machine offers a large working area of 1500 × 3000 mm and high travel speeds of up to 80 m/min, enabling efficient processing of both individual parts and mass production. The WSX cutting head with automatic focus adjustment (autofocus) ensures optimal cutting parameters for different materials and thicknesses, significantly reducing the need for manual adjustments and increasing productivity. The device can handle a wide range of materials such as carbon steel, stainless steel, aluminum, brass, and copper, delivering clean edges and high-quality finishes. An additional advantage is the use of high-quality components such as INOVANCE servo drives, linear guides, and a reliable S&A water chiller, ensuring stable and continuous operation even in 24/7 mode. The machine is designed with user safety and comfort in mind, offering safety systems, easy access to controls, and the possibility of integration with additional systems such as fume extraction or automated loading. It is an efficient and cost-effective solution for companies seeking modern laser cutting technology. Delivery to the customer is available. Delivery cost is calculated individually by the transport company. Kodpfx Aoyw R Rnob Uedl If you are interested in other machines, we encourage you to visit our website.

Condition: used, functionality: fully functional, We are offering this used Spiro Plazma 3000x1500 SC 1836 plasma cutter; year of manufacture unknown. Type: SC 1836 Machine number: 3033 Kdsdpsyw Rc Dsfx Ab Uol If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 31,835 h, laser type: CO₂ laser, laser source model: AF4000i-B, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 920 kg, overall weight: 10,500 kg, total length: 6,750 mm, total width: 2,850 mm, total height: 2,300 mm, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, OPPORTUNITY!! We offer a used Amada FOMII 3015 NT laser cutting machine, year of manufacture 2012. Amada FO MII 3015 NT Laser Cutting Machine Kdjdpfxeywz A Uo Ab Usl Operating hours: 31,835 h (at the time of documentation) Service: see logs from the control panel Working area (cutting surface): 3070x1550 mm Maximum workpiece weight: 920 kg Resonator power: 4 kW (oscillator AF4000i-B) Machine weight: approx. 10,500 kg Machine dimensions (W x D x H): approx. 6750x2850x2300 mm Manuals and some spare parts included. More technical data can be found in the photos and in the file below ("Installation Summary"). Serial number: 092 / 2712 Installation date: 2014 Load capacity: 3,000 kg Max./min. sheet size: 3000x1500 mm / 2000x1000 mm Net weight: approx. 12,700 kg Dimensions without edges, "balcony," and front table: W x D x H approx. 4300x2450x5100 mm The machine is in perfect condition—very well maintained, serviced regularly. Price for the complete set: laser + storage tower Amada LC3015M2 / ASLUL300FOM2 Includes chiller, filtration system, etc. For any questions or if you need additional information, please send us a message or call. The machine is already secured and prepared for transport. Machine pickup in Radom.