Partijhandel Victor

Year of construction: 2018, condition: ready for operation (used), This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, it's in excellent, like-new condition with zero operating hours. Contact us for more information about this machine. Application Types Other Machine Tools Hedpfx Ajxtgk Hjaqow

Year of construction: 1998, condition: ready for operation (used), Immediately available ex-stock: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture 1998, very few operating hours (like new condition) Motorized backgauge Backgauge travel 1000 mm (CNC controlled) Machine control: Siemens Simatic CP 7 Cutting length 3050 mm Hodpfsxtaabex Aaqow Material thickness up to 10 mm Drive power 15 kW Weight 8 t Offered at €13,500 plus VAT ex-location.

Year of construction: 2018, operating hours: 7,500 h, condition: ready for operation (used), General Data Measurements width 3145 mm Measurements depth 2171 mm Measurements height 2440 mm Machine weight 3637 kg Hsdpfx Aoxr Rx Seaqow This SATISLOH 1200 DLX-2 was manufactured in 2018. It is a vacuum box coater designed for high-volume production of anti-reflective or mirror-coated lenses. Capable of handling all organic materials and mineral glass, it features dimensions of 2171 x 3145 x 2440 mm and weighs 3637 kg. Consider the opportunity to buy this SATISLOH 1200 DLX-2. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg Hsdsxr Ncvopfx Aaqow

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: Hjdpfx Aajxr Awaeqsw The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Hjdpfxjxr Am Ue Aaqew Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Hsdpfx Aasxrwmveqsw Application Types Other Machine Tools

Year of construction: 2025, condition: new, 3D Welding Table Steel With Nitriding D22 - 2000x1000x150 Hedsxrp S Djpfx Aaqew Weight: 630 kg without tools

Condition: good (used), Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos -Dimensions: 560/470/H405 mm -Weight: 62 kg Hjdpfjxrkquex Aaqew

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 229, total width: 500 mm, total length: 600 mm, total height: 1,200 mm, number of straightening rollers: 5, Profile rolling machine: Rolling - Bending - Straightening / Profile dimensions as per attachment (see photo) Hedpexrflmjfx Aaqow

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, wire diameter (max.): 6 mm, type of input current: three-phase, overall weight: 3,000 kg, input voltage: 400 V, The machine is in full working order. It is being sold complete with a mechanical rotary table. The automatic rotary table shown in the photos is not included in the offer. Hsdpfx Aexrdm Aoaqew

Year of construction: 2018, operating hours: 31,241 h, condition: like new (used), machine/vehicle number: IntNr231416, CNC-DMG Gildemeister MULTISPRINT 36 / SWISSTYPE machining up to 170 mm turning length Year of manufacture: 2018 Operating hours: 47,548 Machining time: 31,241 Status: October 2025 Control: Fanuc 30i B Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes on every spindle position. Use of driven tools on all spindle positions. Y-axis available on all spindle positions as standard. SWISSTYPEkit for short and long turning up to 170 mm length. Chuck or bar machining: bars from 4 to ø 36 mm, chuck parts up to ø 50 mm. Double rear and off-center machining possible. Machine type: Multi-spindle automatic lathe SWISSTYPE machining: up to 170 mm turning length Control: FANUC Series 30i Maximum flexibility thanks to modularity and Y-axes on all spindle positions Use of driven tools on all spindle positions Machining: bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm Double rear and off-center machining possible Performance Data Feature Value Max. workpiece diameter 36 mm Hjdpoxrc Rgofx Aaqjw Max. workpiece length 170 mm Max. bar capacity 36 mm Travel (X / Y / Z) 50 / 100 / 170 mm Main spindles Number: 6 C-axes (angular resolution): 0.002° Cross slides: 6 × (X-/Y-axis) Travel Z1–Z6: 170 mm (with SWISSTYPE-Kit) Max. bar capacity: Ø 40 mm Spindle speed: up to 7,500 rpm Drive power (100% duty cycle): 3 kW Torque (100% duty cycle): 32 Nm Drum indexing time: 0.65 s Counter spindles / Pick-up spindles Quantity: 2 (C-axes with X-/Y-/Z-axis) Through bore: Ø 40 mm Spindle speed: 7,500 rpm Drive power: 3 kW Torque: 32 Nm Travel (Z7–Z8): 410 mm Travel (X7–X8 / Y7–Y8): 277 / 312 mm Rapid traverse speed: 40 m/min Tool holders on cross slides Max. number of tools: 3 Spindle speed: 3,900 / 8,000 rpm Drive power (100% duty cycle): 0.9 kW Torque (100% duty cycle): 5.8 / 2.9 / 1.7 Nm Travel (X1–X6 / Y1–Y6): 50 / 100 mm Rapid traverse speed: 20 m/min Slides for rear machining Spindle speed (U7–U8): 3,900 / 8,000 rpm Drive power: 0.9 kW Torque: 5.8 / 2.9 / 1.7 Nm Control display: 15" color monitor (×2) Clamping system: Hainbuch TOPlus 40 quick-change collet chuck Hinged belt chip conveyor with lift pump High-pressure oil system (filters 50 / 25 µm, pumps 5 / 12 MPa) Various tool holders Fire extinguishing system Bar loading magazine (surface loader design) Workpiece loading system The machine is fully functional both electrically and mechanically and can be inspected under power by appointment. Subject to technical changes and errors and prior sale!

Condition: used, 1 piece numbering punching machine HP 5000 E-ZH with table, as per images and inspection Condition: used Payment method: advance payment by bank transfer Storage location: Hall 1 Shipping: Collection only – shipping is not offered for this item! Hsdpexrcw Tefx Aaqjw

Condition: used, 1 unit profile bending machine ZHOUXIANG ZX-JW159S with various accessories, as per the pictures and inspection, self-dismantling required. Colour: blue. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 2. Shipping: Collection only – Shipping is not offered for this item! Hsdpfxjxrcwte Aaqew

Condition: used, 1 piece metal cut-off saw HBM 350 PROFI as per pictures and inspection Color: blue/grey Condition: used Payment method: advance payment by bank transfer Storage location: Hall 2 Shipping: Collection only – Shipping is not offered for this item! Hodpjxrcq Tsfx Aaqsw

Condition: ready for operation (used), Year of construction: 2019, 1 Complete Plasma Cutting Machine OPTITOME II 2060 HPI with accessories Auction includes: Power generator NERTAJET HPI300 Cooling unit FRIOJET 300 I Various welding accessories and equipment (nozzles etc.) in storage boxes as per images and inspection Original price of the complete system: 81,900 net (see also the PDF attachment to the description) Colour: red/black Hodpfxexrckgs Aaqjw Year of manufacture: 2019 Condition: used Payment method: Advance payment by bank transfer Storage location: Hall 1 Shipping: Collection only – shipping is not offered for this item!

Condition: used, 1 unit Hydraulic Guillotine Shear ERMAKSAN CNC HGD 3100x10 Cutting length approx. 310 cm, as per photos and inspection, self-dismantling Color: grey Year of manufacture: 2014 Condition: used Payment method: advance payment by bank transfer Hodpfx Aaexrch Esqew Location of goods: Hall 1 and rack in outdoor area Shipping: Collection only – No shipping offered for this item!

Condition: used, 1 unit CNC steel tray bending and folding machine W62K-5X3200 Working length approx. 320 cm, max. working thickness 5 mm, operating hours approx. 2h, as per pictures and inspection, self-dismantling Hsdpfx Aaexrcgbsqsw Color: grey/blue Condition: used Payment method: advance payment by bank transfer Storage location: Hall 1 Shipping: Collection only – no shipping offered for this item!

Condition: good (used), overall weight: 560 kg, Marking plate / marking table / surface plate / 1195x1000x160(35) mm -KOM 493- Offered here is a very heavy-duty marking plate or surface plate with the corresponding legs. Dimensions: 1195 x 1000 x 160 (35) mm Total weight: approx. 580 kg (incl. pallet) Hedpfexrb N Uex Aaqow Weight per machine leg: approx. 42 kg Surface plate weight: approx. 392 kg The marking plate has a working height of 791 mm. The height of the legs is variable.

Year of construction: 1990, condition: used, Trumpf Trumatic 240 punching machine, year 1990, currently disconnected and ready for transport Hsdsxq Nqwopfx Aaqew

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Hodpexq Hknjfx Aaqow Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our opinion, the machine is in good condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2022, KRONOS 32 SP machine; • Year 2022. • 4 off 3000x1500 beds (including spare slats); Hjdpfx Ajxqyhgjaqjw • extraction unit (including ducting); • POLARIS CNC control unit; • consumables (including drill bits); • Hypertherm XPR 300 unit; • full service history; • Technical, maintenance and operational documentation.

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2260 mm Measurements depth 8950 mm Measurements height 4050 mm Machine weight 3900 kg Hedpfx Aaoxqtbmoqew This FOREL VW2800AO was manufactured in 2014. It features a comprehensive setup for glass processing, including edge deletion, inspection, frame placement, assembly, gas filling, pressing, spacer application, and sealing capabilities. Dimensions are substantial with a length of 8950 mm and height of 4050 mm. It operates under continuous conditions, adhering to CEI EN 60204-1 standards, with a total installed power of 35 kW. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2019, condition: good (used), functionality: fully functional, Venom Standard V8 Central, manual clamping device for bandsaw blades Grinding wheel is directly driven, reducing vibrations and enabling very high material removal rates Large-diameter grinding wheel V8 = 300 mm for increased profile durability of the grinding wheel Electric feed adjustment for tooth face and tooth back via touch panel Integrated grinding wheel dressing device Frequency inverter for stepless feed speed adjustment Available for gang or circular saw blades Frequency inverter for stepless grinding wheel speed adjustment Swivel arm Technical details: Tooth profiles: PCB Blade width Bandsaws: 32 mm to 380 mm Blade thickness: 0.4 – 6.0 mm Adjustable pitch: 14 – 60 mm Adjustable tooth height: 5 – 30 mm Rake angle: 0° – 40° Working speed: 0 – 30 teeth/min Grinding wheel diameter: V8 = 300 mm Grinding wheel thickness: 6 – 20 mm Grinding wheel drive: 3.2-4.0 kW electric motor Water pump: 120–350 l/min Grinding wheel is directly driven, reducing vibration and allowing for very substantial material removal Hedpsxqrtbjfx Aaqow Grinding wheel with large diameter (300 mm) for enhanced grinding wheel profile stability All mechanical guides are located at the rear of the machine to protect them from moisture Electric feed adjustment for tooth face and tooth back via touch panel Built-in grinding wheel dressing device

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery Hodpfx Aajxqrg Ioqjw if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!