Delmac Oy

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 218 mm, total height: 220 mm, total length: 270 mm, working width: 1,350 mm, overall weight: 3,500 kg, power: 37 kW (50.31 HP), grinding belt length: 2,150 mm, workpiece height (max.): 150 mm, grinding belt width: 1,380 mm, input frequency: 50 Hz, input current: 75 A, input voltage: 400 V, workpiece width (max.): 1,350 mm, Manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG Machine type: Wide belt grinding machine Type: EH52.13 Machine number: 200109262 Year of manufacture: 2001 Operating voltage: 400 V Control voltage: 220 / 24 V Fodpfx As Ai D Urom Ejpp Total power: 37 kW Rated current: 75 A Frequency: 50 Hz Total weight: 3500 kg Wiring diagram number: 102.9.702.9024 Grinding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total number of grinding units: 2 • Longitudinal belt: 2 • Steel roller diameter = 200 mm: 1 / 15 kW • Fine grinding unit: Motor: 15 kW, 1.8 - 18 m/s • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Table height constant • Feed rate: 3 - 12 m/min. • Grinding belt length, longitudinal unit (mm): 2150 x 1380 • Pressure bar: CSD system, electromagnetic, wear-free Without grinding belts and extraction ducts. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, operating hours: 11,450 h, total width: 2,500 mm, total height: 2,500 mm, total length: 4,000 mm, Year of manufacture: 1998 Colour: Blue Empty weight: 5.000 kg - Year: 1998 - Serial number: 98055541 - Operating hours: 11450 - Number of units [pcs]: 4 - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 2000 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 260 - - Roller material: Rubber - - Motor power [kW]: 22 Fsdps Ai D Tiefx Am Eopp - └ Unit 2: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 2000 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 260 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 3: - - Position: Top - - Type of unit: Sanding pad - - Sanding belt length [mm]: 2000 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 4: - - Position: Top - - Type of unit: Brush unit - Max. working width [mm]: 1300 - Infeed table length [mm]: 200 - Outfeed table length [mm]: 1050 - Feed motor [kW]: 2.2 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 111 - Fuse [A]: 125 - Transport dimensions: 4000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, working width: 1,350 mm, power: 85 kW (115.57 HP), roller diameter: 250 mm, TECHNICAL DETAILS Working width: max. 1,350 mm Number of processing units: 4 Feed motor power: 5.5 kW Sanding unit 1 Fsdpfx As Aihpaem Espp Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 2 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 3 Roller diameter: 250 mm Motor power: 15 kW Speed: 2,905 rpm Sanding belt width: approx. 1,350 mm Sanding unit 4 Roller diameter: 320 mm Motor power: 15 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm MACHINE DETAILS Installed total power: 85 kW EQUIPMENT Calibrating, sanding, and finishing machine Work table with fixed height for line operation NC-controlled feed speed regulation Sanding unit with steel roller Sanding units with rubber rollers Touchscreen control CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8401

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Fedpfxs Ah Rxce Am Espp Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: ready for operation (used), Working width: 1350 mm Workpiece thickness: 3-160 mm Workpiece length: min. 200 mm Belt speed: 22 m/s Belt dimensions: 1330 x 1900 mm Feed rate: 6-25 m/min Feed motor: approx. 1.1 kW Height adjustment motor: approx. 1.1 kW Drive motor: approx. 18.5 kW Weight: approx. 2750 kg Equipment: Roller assembly Sanding shoe assembly Outfeed and infeed roller guide No cleaning brush The machine can currently be inspected and tested. Fjdpfx As Ah Rv Nsm Ejpp The data was taken from a data sheet; therefore, no guarantee is given regarding its accuracy.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Fedpfx Ame Ah Rt Hj Eopp Working height: 880 mm Workpiece thickness: max. 80 mm Workpiece thickness: min. 3 mm Drive power: 2.5 kW Feed rate: 4.5–22 m/min Feed rate control: stepless Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between guide rollers: 40 mm Workpiece vacuum clamping system Fan power: 5.5 kW Operating side: left Operator terminal: graphical Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm Weight: approx. 4,200 kg EQUIPMENT Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding Transport table with individual conveyor belts Refurbished conveyor belt Steplessly adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Stepless electronic sanding belt speed control via frequency inverter Wear-free braking system Pneumatic sanding belt tensioning Intermittent belt dust extraction system Infrared belt control Graphical operator terminal for entering machine setting values Numerical thickness adjustment Fault source display Workpiece throughput display Feed rate display Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape Workpiece vacuum clamping system with fan

Condition: used, Year of construction: 2017, Calibration grinding machine Manufacturer: Viet Type: S1 213 2200 RKRT Fodpe Ahg Rkjfx Am Ejpp Year of manufacture: 2017 Technical data - Grinding width: 1300 mm - 1x Calibration grinding unit - 1x Combination grinding unit - Feed rate: 10 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), CATALOGUE NUMBER 7910 TECHNICAL DATA - max. width of the workpiece: 1350 mm - max. height of the workpiece: 150 mm – from above: - rubber roller, pressure roller I unit (fluted metal roller for calibration) II unit (two smooth metal rollers + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - metal infeed roller - conveyor belt - metal output roller, slip roller - pneumatic oscillation of the belts using photocells - electric table lifting - 2 types of feed speeds: 2-14 m/min - main motor: 5.5/15 kW - brake - grinding height potentiometer - feed motor: 0.75 kW - working pressure: 8 bar Fsdpfx Ame Af Inie Eopp - diameter of the dust extraction nozzle: 200 mm, 120 mm - dimensions (L/W/H): 1860x2200x1980 mm - weight: 1995 kg ADVANTAGES – made in Germany – unpainted – DTR documentation – used grinder, very good condition Net price: 38,900 PLN Net price: 9,040 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to currency fluctuations)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 11068, total width: 230 mm, total height: 230 mm, total length: 320 mm, overall weight: 6,000 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, We offer this demonstration machine, Heesemann Type HSM .4 RQHD, manufactured in 2026. It is currently located in our showroom in AT-4894 Oberhofen am Irrsee. Machine Type: Type HSM .4 RQHD, ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S, Grinding width 1,350 mm Machine Number: 11068 Year of Manufacture: 2026 Machine Data: Multi-purpose surface grinding machine, Type HSM .4 RQHD ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S Grinding width 1,350 mm Frame construction with conveying table With continuous conveyor belt, feed rate 3 - 15 m/min, frequency-controlled, constant working height 880 mm, machine upper part adjustable (3 - 160 mm) depending on the workpiece thickness, integrated control cabinets. Pressure roller (Ø 50 mm), pivoting, in the machine infeed, incl. oversize control Workpiece suction system with variable vacuum (controlled via vacuum sensor) for the safe transport of workpieces shorter than 500 mm in the feed direction, integrated fan with frequency inverter, drive power 4 kW Automatic workpiece thickness measurement in the infeed Non-driven rollers (in the machine infeed and outfeed) Fold-down table in the machine outfeed, with wooden plate Industrial PC 15.6" Program memory for 1,000 programs Program for remote maintenance Program for dust extraction flap control MMI package consisting of: Intuitive machine operation with self-explanatory symbols LED strips in the outfeed and infeed as operator assistance for the workpiece (Infeed workpiece positioning for better grinding belt utilization, outfeed displays workpiece position) Display of belt manager status on the unit (screen) Unit information with grit size (screen) Visualization of the workpiece position during passage through the machine 1 Contact roller unit with steel roller Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 Transverse grinding unit Grinding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency inverter 1 Longitudinal grinding unit with pressure fin belt system Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 16 m/s Drive power: 15 kW Frequency inverter 2 Pressure bar with computer-controlled selective pressure control system CSD® (10 years warranty) Fjdpfj Aft Rbsx Am Eepp 1 Rotating disc brush unit DB-S 10 driven disc brushes, working in 2 rotation directions, central height adjustment for abrasive wear, incl. quick-change device for disc brushes Brush covering: Flex-Trim K220 (1 set) Diameter: 150 mm 1 additional set (10 pcs.) of discs with stranded wire covering (0.25 mm) Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply Energy Management System EMS Belt support side: left Terminal: front left If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Second-hand Viet Type S3 223TM wide-belt sander for professional use in woodworking. The machine is suitable for sanding and calibrating timber workpieces and panels. With a working width of 1,350 mm, it is designed for a wide range of woodworking tasks. Fsdpfx Amj Afpgrj Eepp Technical data: - Working width: 1,350 mm - Unit 1: Calibration / 18.5 kW - Unit 2: Combination / 11 kW - Vacuum fan: 4 kW

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units Fpodpfo Adfddsx Am Ejp ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 Fedpfx Amo Aazaae Espp - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Fodpfxs Aax Rco Am Ejpp Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: new, Working width 1600 mm Number of sanding units 2 st. Workpiece thickness max. 200 mm Fpodpfxoz St R Ne Am Eep

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Fsdsz Rzyvspfx Am Espp

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2013.11.293, overall weight: 8,000 kg, HEESEMANN MFA IMPRESSION 2013 WIDE BELT SANDER – JBS Industrial wide belt sander HEESEMANN MFA Impression from 2013, manufactured in Germany. The machine is designed for sanding wood surfaces and wood-based materials. It is a solution for carpentry workshops, furniture manufacturers, door manufacturers, and manufacturers of finishing elements. Through-feed material transport and roller tables on the infeed and outfeed sides facilitate the handling of large parts. The operator panel with a screen enables control of the machine's operation, and side doors provide access to the sanding units. TECHNICAL DATA: – brand: HEESEMANN, – model: MFA Impression, – manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG, – year of manufacture: 2013, – country of manufacture: Germany, – machine number: 2013.11.293, – operating voltage: 400 V, – frequency: 50 Hz, – total power according to the nameplate: 97 kW, – rated current: 205 A, – control voltage: 24 V DC / 230 V AC, Fodsz Rnugjpfx Am Espp – total weight: 8000 kg, – CE marking. EQUIPMENT: – operator panel with screen, – belt conveyor, – infeed roller table, – outfeed roller table, – sanding units with separate drives, – CSD pressure system marking, – connections for dust extraction system, – pneumatic elements with a pressure gauge, – emergency stop buttons, – side access doors to the units. Transportation to the specified address can be arranged for an additional fee. Please contact us for more information. We invite you to contact us and view our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), Year of construction: 2021, functionality: fully functional, (ROLLER/PADDING, 1350mm) Technical specifications of the machine: Max. working width 1350mm, min./max. working height 3/160mm, number of sanding belts 2, length of sanding belts 2620mm, hardness of the first roller 90 SH, diameter of the first roller 180 mm, diameter of the second roller 180 mm, padding, speed of sanding belts 18m/s, feed speed 4-20 m/min via inverter, power of the feed motor 0.75HP, power of the motor for lifting the worktable 0.33HP, diameter of extraction openings 160mm (2 x) + 2 x 80mm, working pressure 6 bar, CE safety standard, front and rear roller track with two rollers. Machine with standard equipment and included accessories: - power of the main motor 20HP - automatic star/delta start - self-braking motor - automatic positioning of the worktable according to the thickness of the workpiece with stock removal adjustment - electronic digital display of the set working height - automatic centering of the feed belt - pneumatic shutdown of the roller from the front of the machine MACHINE IS SUITABLE FOR: - calibrating and sanding solid wood and chipboard (first roller + second roller) - sanding veneer (padding) - sanding lacquered surfaces (segmental padding) Fedsz Nwtcopfx Am Eepp Electronic controller with a 12'' color touchscreen Unit with a brush at the outlet for wood structuring (Tynex G60 brush) - motor power 4HP (3kW) Segmental electronic padding 1350mm 48 segments Increased power of the main motor to 25 HP Additional motor with a power of 20 HP Grit-set system for adjusting the roller height according to the paper grit (2x) Vacuum table

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Fsdpfx Aez Ippxjm Espp Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Fsdoz Hxnbepfx Am Eopp Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: excellent (used), functionality: fully functional, overall weight: 3,500 kg, power: 52 kW (70.70 HP), table width: 1,350 mm, workpiece width (max.): 1,350 mm, 1. Cross-belt sanding 2. Segmented sanding pad Fodpoz E Ig Djfx Am Espp The machine is in the excellent condition shown in the photos. It can be tested and works perfectly.

Condition: used, machine/vehicle number: 008741, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 6 Nr Fodpfx Amez Eyxrj Ejpp sectioned swab: yes

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: S/70032, grinding width: 1,360 mm, power: 49 kW (66.62 HP), height adjustment type: electric, The refurbished automatic wide-belt sanding machine is designed for calibrating and final sanding of solid wood. This model belongs to the higher range of automatic wide-belt sanding machines, characterized by an exceptionally rigid frame, top-quality sanding performance, and versatile applications. Main components: Fjdpfjz D Ufdox Am Eepp 1. Steel roller – 15 kW 2. Hard rubber roller – 15 kW 3. Mechanically adjustable platen – 11 kW + Brushing/cleaning unit at the outlet (without tooling). Sanding width 1360 mm Working thickness 3 – 160 mm Motorized adjustment of working thickness with LCD display Automatic centering of the feed belt Total maximum power consumption 49.8 kW Conveyor in good condition CE safety standard Weight approx. 4000 kg

Condition: good (used), Machine configuration: First electronic cross-belt Second roller belt Third electronic superfinishing buffer belt Fourth electronic cross-belt Fpedpfsz D Hr Aex Am Esp In-line machine with vacuum system

Condition: used, VIET SANDING TRAIN: Lower VALERIA 3CCC 1100-INF: - 1st roller: 30 kW - 2nd roller: 18.5 kW - 3rd roller: 11 kW - 1 brush, Upper VALERIA 3CCC-TM/SUP.1100 - 1st roller: 30 kW - 2nd roller: 18.5 kW - 3rd pad: 11 kW - 1 brush, 4 fans for carpet vacuum. Fjdoz At Tgjpfx Am Eopp

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 360192021, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 5,600 kg, grinding height: 120 mm, power: 29.66 kW (40.33 HP), height adjustment type: electric, type of input current: DC, grinding belt length: 2,620 mm, workpiece height (max.): 120 mm, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, Roller, shoe, cleaning brush, dust removal, vacuum table. Table height is fixed. Two sanding belts. Fpsdez Akpljpfx Am Ejp