Plast Trade

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg Tsdpe Ahkh Ajfx Afgjd with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Tjdpfx Ao Ahkfkefgod Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,700 kN, Hydraulic injection moulding machine manufactured in 2005. This SANDRETTO 2480/270 features a clamping force of 270 T and includes a complete 16-cavity mold. The preform weights are 53 g or 66 g with a neck finish of 36/29. The machine is currently connected and operational, ensuring reliable performance. If you are looking to get high-quality PET preform production capabilities, consider the SANDRETTO 2480/270 machine we have for sale. Contact us for further details. • Condition: Currently connected and in operation; fully operational and running Todpfxs Ahhnne Afged Additional equipment • Complete 16-cavity preform mold: • Neck finish: 36/29 • Preform weights: 53 g or 66 g • Piovan dryer • EISBAR mold temperature conditioner

Condition: used, Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 250 mm, plate length: 570 mm, plate width: 570 mm, total length: 4,300 mm, total width: 1,700 mm, overall weight: 3,640 kg, Arburg 420C-1000-290 injection molding machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 2000 Closing force [kN]: 1000 Column spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working hours [h]: 59000(new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot socket: Yes Core string: 1x Tods Ahhfujpfx Afgsd Air valve: 1x Control of heating for molds: 3x

Condition: used, Year of construction: 2000, Plastic injection molding machine, Krauss Maffei, KM 300-1900 C2, dimensions: 6.21 x 2.04 x 2.38 m, weight: 12,500 kg, year of manufacture: 2000. Tjdpfx Afs Agtbwjged

Condition: good (used), Year of construction: 2011, operating hours: 45,087 h, SUMITOMO shi-Demag Systec 60/420-200 Clamping force 60 tons Year of manufacture 2011 Control system CDAIS Stroke 30 mm Displacement 106 cm³ Mold dimensions 420 x 420 Installation height 260 mm Tjdpfx Aj Agpc Rsfgjd Operating hours 45,087

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Tjdps Agkd Eofx Afgod You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Tsdpfs Af Rw Nox Afged Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Tedpfxj Af Rvrj Afgjd Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Tedpe Afw Drofx Afgjd Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: new, Year of construction: 2027, functionality: fully functional, machine/vehicle number: 61038305, clamping force: 9,000 kN, screw diameter: 55 mm, clearance between the columns: 1,440 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, injection weight: 519 g, opening stroke: 3,200 mm, drive type: Hydraulisch, clear span: 1,440 mm, tool weight: 2,000,000 g, Injection molding machines directly from the manufacturer! As a manufacturer, KraussMaffei offers you our inspected and versatile stock machines: The hydromechanical two-platen clamping unit of the GX machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are ideally absorbed and the service life of the molds is increased. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 901 / 1400 / 750 GXZ G02 (Order 38618417) CONTROL  MC6 with 21.5" TFT color screen and multi-touch function Todpfx Afs Afdlcoged CLAMPING UNIT  Clamping force kN 9000  Mold opening force, max kN 630  Daylight (h x v) mm 1440 x 1190  Platen size (h x v) mm 1950 x 1750  Minimum to maximum mold height mm 540 – 1540  Mold opening distance mm 2340  Maximum mold opening stroke mm 1800  Maximum mold weight kg 20000 INJECTION UNIT 1 - SP1400  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.8  Injection pressure bar 2387  Stroke volume cm³ 570  Shot weight at max. stroke for PS g 519  Injection speed mm/s 150  Injection flow rate cm³/s 356  Screw drive / speed 1/min 310  Plasticizing rate (standard screw)4) g/s 58.8  Nozzle mounting force kN 82 INJECTION UNIT 2 - SP750  Screw diameter / type mm 45 / Standard  Effective L/D ratio 22.4  Injection pressure bar 2336  Stroke volume cm³ 318  Shot weight at max. stroke for PS g 289  Injection speed mm/s 140  Injection flow rate cm³/s 223  Screw drive / speed 1/min 370  Plasticizing rate (standard screw)4) g/s 40.9  Nozzle mounting force kN 50 ELECTRICAL PARAMETERS   Power supply V / Hz 400 / 50 with neutral conductor ADDITIONAL EQUIPMENT  BluePower servopump drive  Integrated rotary table, movable platen, D 1830 mm  Euromap AW platen + AW positions ± (280.0) ± (0.280)  12x cooling water circuits ½” 85°C on the rotary table  10x cooling water circuits ¾” 85°C FWAP  Nozzle spacing SP1400 – SP750 300 mm  Wear-resistant plasticizing unit (ZE23.00)  Core pull, hydraulic 4+4  Air valves 2+2  Hydraulic cascade 8  Pneumatic cascade 26  Euromap interfaces E18, E67  Hot runner control zones 64 The machine is located at our plant in Parsdorf and will be available from week 09, 2025. Further optional equipment can be offered upon request. We look forward to receiving your inquiry.

Condition: excellent (used), Year of construction: 2001, 1,0 used injection molding machine with robot, safety fence, and conveyor belt. Manufacturer: DEMAG Type: ERGOTECH100/420-430System Tjdpfx Aj Afbx Tsfged Year of manufacture: 2001 Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Screw diameter: 35 mm Maximum injection volume: 168 cm³ Injection part weight: 150 g/shot Control system: NC4 Equipment: - Robot, Wittmann, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt - 2 x core pull - Blow valve - Highly wear-resistant bimetallic screw - Dual-pump technology for parallel movements

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine mit Roboter und Reinraumausstattung Hersteller: ENGEL Typ: VICTORY 80/25 TECH Tjdpfx Aj Afbwpofgsd Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 18 mm Max. Hubvolumen: 20 ccm³ Spritzteilgewicht 18 g/PS Steuerung: CC200 Ausstattung: Roboter, Engel, Typ: ERC Reinraumkabine -1 x Kernzug -Ausblasventil

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Tjdpfx Afo Afaqbjgjd Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. Tjdpfx Afs Ad Inlegod - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 800,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm - Ejector stroke: 230 mm Tedps Adpt Aefx Afgod Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Year of construction: 2005, Demag Extra 130-430 Tjdpfo Acdnrex Afgsd Closing force: 130 tons Year of manufacture: 2005 Control system: CDAIS Die space: 47.5 x 47.5 Scrow: 40 mm Displacement: 231 cm3

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Tjdpfxs Aa Alws Afgsd

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Tjdpfxj Aaz Tao Afgjd Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: QN.127018, Used plastic injection molding machine Manufacturer: SYNERGI - NETSTAL Maschinen AG Type: SYN 2400-900 Tedpfx Aj Aazliefgod Year of manufacture: 2002 Machine No.: 127018 Equipped with Wittmann W633-643 handling system.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Tedj Aarbbspfx Afged

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) Todpoz T Iufefx Afgsd - Demag robot interface - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Tjdez Szncopfx Afgod Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: excellent (used), Year of construction: 2017, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 55 mm Shot weight: 510 g Distance between tie bars V: 720 mm Tjdpfxjz R Rggs Afgod Distance between tie bars H: 720 mm Platen size: 1040x1040 mm Shot volume: 558 cm3 Mould min: 400 mm Type: Horizontal Drive: Hydraulic 2 core pullers Linear robot Tecnomatic compact conveyor

Condition: excellent (used), Year of construction: 2016, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 60 mm Shot weight: 510g/PS Min Mould: 400mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Tjdez R Rfvjpfx Afgjd Drive: Hydraulic 2 hydraulic Cores Arburg Robot Multilift Conveyor