Limekon GmbH

Condition: excellent (used), Weiss TS 130 Temperature Shock Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: TS 130 Machine Type: Temperature Shock Test Chamber Test Chamber Volume: approx. 130 liters Operating Hours: approx. 108.7 hours For sale is a used Weiss TS 130 temperature shock test chamber with S!MCON/32 control system. The two-chamber system enables rapid temperature changes between a hot chamber and a cold chamber. The test specimen is moved between the chambers using a lift basket. Suitable for temperature cycling and temperature shock tests, material testing, quality assurance, electronics testing, as well as research and development. Temperature Data: Temperature Range Hot Chamber: +60 °C to +220 °C Temperature Range Cold Chamber: −10 °C to −80 °C Switching Time between Hot and Cold Chamber: approx. 10 seconds Temperature Stability: approx. ±1 K Test Chamber: Test Chamber Volume / Lift Basket: approx. 130 liters Dimensions Lift Basket (W × D × H): approx. 500 × 600 × 450 mm Maximum Load of Lift Basket: 20 kg Maximum Load per Insert Shelf: 10 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 14.0 kW Rated Current according to Nameplate: 26.0 A Connection: CEE 32 A Recommended Fuse: 35 A slow-blow Protection Class: IP20 Refrigeration System: Refrigerant: R404A, Filling Quantity 2.2 kg Refrigerant: R23, Filling Quantity 1.2 kg Maximum Low Pressure: 18 bar Maximum High Pressure: 25 bar Standing Pressure: 11 bar Cooling Water Data: Water Inlet Pressure: 2–6 bar Connection: R 1/2 inch Cooling Water Consumption at Full Load: approx. 0.3–0.6 m³/h Maximum Particle Size: 40 µm Dimensions and Weight: External Dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width Including Door Hinge: approx. 1,850 mm Depth Including Removable Door: approx. 1,155 mm Additional Depth of Removable Touch Panel: max. 170 mm Weight of Test Chamber without Options: approx. 950 kg Weight of Separate Cooling Unit: not determined Equipment: S!MCON/32 control system with external touch panel Two-chamber design with lift basket Viewing window Adjustable temperature limiter Digital and analog I/O RS232 and RS485/RS422 interfaces Potential-free contact Connection for external Pt100 sensor Separate cooling unit as shown in the pictures SIMPATI 3.0 software and extensive documentation as shown in the pictures Klsdpfx Ajznmftjiajw Condition and Scope of Supply: Used Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Scope of supply includes separate cooling unit, software, documentation and accessories, exclusively as shown in the pictures. Loading and shipping via forwarding agent possible upon agreement. Subject to changes, errors and prior sale.

Condition: good (used), LDS V830-335T electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Type: V830-335T Machine type: Electrodynamic vibration testing system / Shaker Power amplifier: LDS SPA10K CE Controller: DTC VENZO 800 For sale is a used, air-cooled LDS vibration testing system for the simulation and reproduction of mechanical vibrations and environmental influences. The system is suitable for sine and random vibration tests, endurance tests, and the testing of the dynamic behavior of components and structures. Technical data: Sine test force: 9,807 N peak Random test force: 9,807 N RMS Maximum stroke: 50.8 mm peak-to-peak Maximum velocity: 2.0 m/s Sine acceleration: max. 735 m/s² peak / 75 g Random acceleration: max. 588 m/s² peak / 60 g Operating frequency range: DC to 3,000 Hz First main resonance of the vibration table: 2,250 Hz Diameter of the vibration table: 335 mm Maximum test specimen weight: 160 kg Cooling air flow rate: 0.245 m³/s Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. / LDS Series: SPAK Series Amplifier Model: SPA10K CE Sine output power: 10,000 VA Maximum input power: 19.41 kVA Supply at 50 Hz: 380 / 400 / 415 / 440 V Supply at 60 Hz: 380–520 V Set supply voltage: 400 V ±6 % Features: LCD display, numeric keypad, master gain control, emergency stop, and integrated air cooling Control and regulation technology: DTC VENZO 800 Vibration Controller Dactron Dual-DSP Shaker Control System Operating and safety module with emergency stop Control accessories and connection cables as shown in the pictures Dimensions and weight: Vibration exciter with swivel frame (H × W × D): approx. 838 × 1,005 × 772 mm Kljdeznlzyepfx Aiaew Weight including swivel frame: approx. 616 kg Total weight of all components: not determined Application areas: Vibration and shock testing Sine and random vibration testing Environmental simulation Endurance and material fatigue testing Component and structure testing Automotive and aerospace engineering Research, development, and quality assurance Scope of supply: LDS V830-335T vibration exciter with swivel frame LDS SPA10K CE power amplifier in the control cabinet DTC VENZO 800 Vibration Controller Dactron Dual-DSP control component Emergency stop and operating components Connection cables and accessories as shown in the pictures System manuals, software CD, and available calibration documents Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use are present. Collection or shipping via freight forwarder possible by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: good (used), OMAG / AFFRI 903 RSD Hardness Tester Professional stationary benchtop hardness tester from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (Model 903 RSD). The unit has been regularly inspected and certified by the DAkkS-accredited laboratory 3-Rath Kalibrier + Prüftechnik (most recent inspection on April 28, 2025, for the HRC method in accordance with DIN EN ISO 9000ff). Technical Data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial Number: 76599 Test Method: Rockwell (calibrated for HRC, among others) Voltage: 115 – 230 V Weight / Test Force: 195 kgf Special Feature: Height-adjustable test head for flexible workpiece sizes "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request! Ksdozni D Eepfx Aiaelw

Condition: excellent (used), Heraeus Vötsch HT 4002 Temperature Testing Chamber -40 to +130 °C Manufacturer: Heraeus Industrietechnik Type according to nameplate: HT 4002 Designation on the front of the device: VT 4002 Machine type: Temperature testing chamber / Tabletop testing chamber Test chamber volume: 16 liters For sale is a used Heraeus Vötsch HT 4002 temperature testing chamber with a programmable CTC-E4 controller. This compact, air-cooled tabletop testing chamber is suitable for controlled temperature and temperature cycling tests on components, materials, and electronic components. Technical data: Temperature range: -40 °C to +130 °C Test chamber volume: 16 liters Heating rate: approx. 5.0 K/min Cooling rate: approx. 3.5 K/min Programmable temperature cycling: -40 °C to +130 °C Cooling system: air-cooled Kledpsznir Nefx Aiaow Electrical data: Supply voltage: 230 V, +6/-10 %, 1/N, 50 Hz Rated current: 4 A Rated power: 0.7 kW Refrigeration system: Refrigerant according to nameplate: R22 Refrigerant quantity: 0.4 kg Maximum permissible operating overpressure: 23 bar Controller: Heraeus Vötsch CTC-E4 temperature controller Digital setpoint and function display Programmable temperature profiles Display for heating and cooling operation Fault indicator Interfaces and connections: RS-232 interface RS-485/RS-422 network interfaces Digital I/O connection Connection for external Pt100 temperature sensor Potential-free contact Connection for external control panel Dimensions: External dimensions (W × D × H): approx. 465 × 505 × 625 mm Internal dimensions (W × D × H): approx. 310 × 230 × 205 mm Weight: approx. 75 kg Equipment: Air-cooled refrigeration system Programmable CTC-E4 controller Stainless steel test chamber Observation window in the door Side test chamber feed-through Test chamber lighting Door latch Main switch Multiple communication interfaces Application areas: Temperature tests Temperature cycling tests Electronics and component testing Material testing Quality assurance Research and development Laboratory and industry Shipping data: Shipping dimensions (W × D × H): approx. 465 × 505 × 625 mm Shipping weight: approx. 75 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of delivery: Heraeus Vötsch HT 4002 temperature testing chamber Accessories as shown in the pictures Shipping possible by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: excellent (used), VÖTSCH VT 4002 Temperature Test Chamber -40 °C to +130 °C Manufacturer: Vötsch Industrietechnik GmbH Type: VT 4002 Machine Type: Temperature Test Chamber / Benchtop Test Chamber Test Chamber Volume: 16 liters Ksdpoznibkjfx Aiajlw For sale is a used Vötsch VT 4002 temperature test chamber with programmable temperature control and a temperature range of -40 °C to +130 °C. This compact, air-cooled benchtop test chamber is designed for professional temperature and temperature cycling tests and is ideal for testing laboratories, quality assurance, research and development, as well as industrial component, electronics, and material testing. Technical Data: Model: VT 4002 Design: Air-cooled Temperature Range: -40 °C to +130 °C Test Chamber Volume: 16 liters Heating Rate: approx. 5.0 K/min Cooling Rate: approx. 3.5 K/min Temporal Temperature Deviation in Stabilized State: ±1.0 K Spatial Temperature Deviation in Stabilized State: ±2.0 K Maximum Heat Compensation: 350 W Programmable Temperature Cycling: -40 °C to +130 °C Protection Class: IP20 Sound Pressure Level at 2 m Distance: below 55 dB(A) Electrical Data: Supply: 1/N/PE AC 230 V / 50 Hz Rated Current: 4.0 A Rated Power: 0.7 kW On-site Fuse: 16 A slow-blow Interface: RS-232 Refrigeration System: Cooling System: Air-cooled Refrigerant: R-404A Dimensions: External Dimensions (W × D × H): approx. 465 × 515 × 625 mm Internal Dimensions (W × D × H): approx. 310 × 230 × 205 mm Observation Window (W × H): approx. 135 × 86 mm Weight: approx. 60 kg Equipment: Programmable Temperature Control Digital Control and Display Panel Stainless Steel Test Chamber RS-232 Interface Side Test Chamber Feedthrough Observation Window in the Door Door Latch Main Switch Air-cooled Refrigeration System Interface Plugs and Adapters as Shown in Pictures Areas of Application: Temperature Tests Temperature Cycling Tests Electronics and Component Testing Material and Substance Testing Quality Assurance Research and Development Laboratory and Industry Shipping Data: Shipping Dimensions (W × D × H): approx. 465 × 515 × 625 mm Shipping Weight: approx. 60 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Scope of Supply: Vötsch VT 4002 Temperature Test Chamber Interface Plugs and Adapters Accessories as Shown in Pictures Shipping possible after consultation. Scope of supply as shown. Subject to changes, errors and prior sale.

Condition: excellent (used), VÖTSCH VT 4002 Temperature Test Chamber -40 °C to +130 °C Manufacturer: Vötsch Industrietechnik GmbH Type: VT 4002 Machine Type: Temperature Test Chamber / Benchtop Test Chamber Test Chamber Volume: 16 liters For sale is a used Vötsch VT 4002 temperature test chamber with programmable temperature control and a temperature range of -40 °C to +130 °C. This compact, air-cooled benchtop test chamber is designed for professional temperature and temperature cycling tests and is ideal for testing laboratories, quality assurance, research and development, as well as industrial component, electronics, and material testing. Technical Data: Model: VT 4002 Design: Air-cooled Temperature Range: -40 °C to +130 °C Test Chamber Volume: 16 liters Heating Rate: approx. 5.0 K/min Cooling Rate: approx. 3.5 K/min Temporal Temperature Deviation in Stabilized State: ±1.0 K Spatial Temperature Deviation in Stabilized State: ±2.0 K Maximum Heat Compensation: 350 W Programmable Temperature Cycling: -40 °C to +130 °C Protection Class: IP20 Sound Pressure Level at 2 m Distance: below 55 dB(A) Electrical Data: Supply: 1/N/PE AC 230 V / 50 Hz Rated Current: 4.0 A Rated Power: 0.7 kW On-site Fuse: 16 A slow-blow Interface: RS-232 Refrigeration System: Cooling System: Air-cooled Refrigerant: R-404A Dimensions: External Dimensions (W × D × H): approx. 465 × 515 × 625 mm Internal Dimensions (W × D × H): approx. 310 × 230 × 205 mm Observation Window (W × H): approx. 135 × 86 mm Weight: approx. 60 kg Equipment: Programmable Temperature Control Kjdpfsznh S Usx Aiajlw Digital Control and Display Panel Stainless Steel Test Chamber RS-232 Interface Side Test Chamber Feedthrough Observation Window in the Door Door Latch Main Switch Air-cooled Refrigeration System Interface Plugs and Adapters as Shown in Pictures Areas of Application: Temperature Tests Temperature Cycling Tests Electronics and Component Testing Material and Substance Testing Quality Assurance Research and Development Laboratory and Industry Shipping Data: Shipping Dimensions (W × D × H): approx. 465 × 515 × 625 mm Shipping Weight: approx. 60 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Scope of Supply: Vötsch VT 4002 Temperature Test Chamber Interface Plugs and Adapters Accessories as Shown in Pictures Shipping possible after consultation. Scope of supply as shown. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber air-cooled Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Machine Type: Climate Chamber / Temperature Chamber Test chamber volume: approx. 335 liters For sale is a used Vötsch VC 4034 climate chamber from Vötsch Industrietechnik GmbH. The air-cooled temperature and climate chamber is suitable for professional temperature and climate tests, environmental simulations, material tests, and development and stress tests. With a temperature range of -40 °C to +180 °C and a humidity range of 10 to 98 % RH, the device offers optimal conditions for reproducible test sequences in research, development, quality assurance, and industry. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 × 765 × 750 mm (W × D × H) External dimensions: approx. 780 × 1,758 × 1,800 mm (W × D × H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change (heating): approx. 3.2 K/min Temperature change (cooling): approx. 3.5 K/min Temperature deviation: ±0.1 to ±0.5 K Temperature homogeneity: ±0.5 to ±1.5 K Humidity range: 10 to 98 % RH Temperature deviation in climate operation: ±0.1 to ±0.3 K Temperature homogeneity in climate operation: ±0.5 to ±1.0 K Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Kjdpezng Unsfx Aiaelw Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel operation Stainless steel test chamber Viewing window in the door Test chamber lighting Side access Insert grid Air-cooled system Documentation / Operating manual Accessories as shown in the pictures Application areas: Temperature tests Climate tests Environmental simulations Material tests Electronics tests Quality assurance Research and development Development and stress tests Condition: Used The climate chamber is in used condition. The optical condition corresponds to its age and can be seen in the pictures. Scope of delivery: Vötsch VC 4034 climate chamber Insert grid Control panel / Controller Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the offer. Shipping by freight forwarder or self-collection possible by arrangement. Subject to change, errors and prior sale.

Condition: excellent (used), Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Kljdpfx Aisznbm Eeaew Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: excellent (used), Vötsch VC³ 4018-M Climate Testing Chamber / Temperature Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018-M Machine Type: Temperature and Climate Testing Chamber Test Chamber Volume: approx. 190 liters For sale is a used Vötsch VC³ 4018-M temperature and climate testing chamber with humidity function, ControlPad control system, and factory-installed leather testing modification. The testing chamber is suitable for professional temperature and climate testing, environmental simulation, material testing, quality assurance, research and development, and special leather testing. The unit has been inspected in our workshop. The humidity wick has been replaced, a leak test was performed, and a documented test run was carried out. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018-M Year of manufacture: 2014 Test chamber volume: approx. 190 liters Test chamber dimensions: approx. 580 × 450 × 750 mm (W × D × H) External dimensions: approx. 870 × 1,550 × 1,800 mm (W × D × H) Weight: approx. 470 kg Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 2,300 W Temperature deviation: ±0.1 to ±0.5 K Temperature homogeneity: ±0.5 to ±1.5 K Climate range: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Heat compensation (climate operation): approx. 400 W Special version (-M): Climate range extended to +120 °C / 10 % RH for leather testing Refrigerant: R404A Refrigerant quantity: 1.6 kg Max. condensing pressure: 22.5 bar(g) Max. evaporating pressure: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Equipment: 3.5" ControlPad control system SIMPATI® software including license Temperature and humidity control Stainless steel test chamber Test chamber door with viewing window Halogen test chamber lighting 3 shelf inserts Cable entry R1 Ø125 mm Additional cable entry L1 Ø50 mm Connection for demineralized water Compressed air connection for leather test version Workshop protocol Outgoing test protocol Leak test certificate Original operating manual Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Kljdjzna N Eopfx Aiaew Research and development Leather testing Condition: Used Optical condition as shown in the pictures. Scope of supply: Vötsch VC³ 4018-M climate testing chamber 3 shelf inserts Original operating manual SIMPATI software including license Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Vötsch VC³ 7018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 190 liters For sale is a used Vötsch VC³ 7018 climate testing chamber for performing temperature and climate tests. The unit is suitable for environmental simulation, material testing, quality assurance, electronics testing, and research and development. Before delivery, the device was inspected in our workshop, the heating, cooling, and humidity functions were tested, and the humidity wick was replaced. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Test Chamber Volume: approx. 190 liters Test Chamber Dimensions (W × D × H): approx. 580 × 450 × 750 mm External Dimensions (W × D × H): approx. 875 × 1,545 × 1,805 mm Weight: approx. 460 kg Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 3 K/min Humidity Range: 10 to 98 % RH Climate Range: +10 °C to +95 °C Power Connection: 3/N/PE AC 400 V / 50 Hz Rated Power: 4.9 kW Rated Current: 14 A Refrigerant: R404A (2.5 kg) Refrigerant: R23 (0.75 kg) Operating Hours: 35,800.6 h Equipment: Touch Panel Control Programmable Controller Temperature and Humidity Control Stainless Steel Test Chamber Viewing Window with Interior Lighting LAN/Ethernet Interface Air-Cooled Refrigeration System Test Protocols Operating Manual Accessories as shown in the pictures Application Areas: Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Quality Assurance Research and Development Kodpfx Aiozm Ni Eeajlw Condition: Used Workshop Checked Optical condition as shown in the pictures. Scope of Delivery: Vötsch VC³ 7018 Climate Testing Chamber Test Protocols Operating Manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Klsdpfx Aiszmrmyjaew Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), CTS Type: C-70/600 Kedpezmq Tlsfx Aiaolw CTS C-70/600 Climate Test Chamber Air-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test specimen control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures The device can be inspected by appointment. Loading with a forklift can be arranged. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed Ksdpozmqx Iefx Aiaolw LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Year of construction: 2004, condition: good (used), functionality: fully functional, For sale is a temperature testing cabinet from the brand Weiss, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Weiss Umwelttechnik GmbH • Model: KWP-64/75 • Internal dimensions: approx. 500 x 400 x 325 mm • Temperature: approx. -70° to +130° Celsius • Refrigerant: R404A / R23 • Rated power: approx. 1.4 kW • Year of manufacture: approx. 2004 • Condition: Used, fully functional The cabinet can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €150 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on truck. Errors in technical data and prior sale are reserved. Kodpfxjzmaa Ue Aiaelw

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Kedpfx Aozlz Rxeiaslw Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Instron 5584 Universal Testing Machine, 100 kN Manufacturer: Instron Ltd. Model: 5584 Type: SPRING SF1392-E1-L12-SPL Year of Manufacture: 2007 Machine Type: Universal Testing Machine / Spring Testing Machine Maximum Test Force: 100 kN For sale is a used Instron 5584 Universal Testing Machine with a maximum test force of 100 kN. The system was developed for highly precise spring, compression, and material testing and is ideal for testing laboratories, research institutions, quality assurance, and industrial manufacturing operations. The scope of supply includes the testing machine, the Instron 5800 controller, industrial PC, monitor, keyboard, mouse, and other accessories as shown in the pictures. Technical Data: Manufacturer: Instron Ltd. Model: 5584 Type: SPRING SF1392-E1-L12-SPL Year of Manufacture: 2007 Maximum Test Force: 100 kN Power Supply: 240 V AC / 1~ / 50–60 Hz Mains Current: 25 A Control Voltage: 24 V AC / 50–60 Hz Max. Ambient Temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door, no additional opening space required Controller 5800 (W × D × H): approx. 280 × 570 × 650 mm Equipment: 100 kN testing frame Protective enclosure with sliding door Instron 5800 Controller Industrial PC Monitor Keyboard Mouse Operator console Base Extension Model 2910-061 Test plates / compression tools as shown in the pictures Technical documentation as shown in the pictures Important Note: The original Instron testing software, including a valid software license, is required for operation of the system. Kjdpezlp Ixsfx Aiaslw The software and the software license are not part of this offer. According to the manufacturer, a corresponding modification is required for recommissioning. Due to the missing software, a functional test could not be carried out. Therefore, the sale is primarily aimed at specialized companies for recommissioning or retrofitting. Transport Data: Machine weight: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg Shipping weight according to the manufacturer: approx. 1,565 kg Shipping dimensions (L × W × H): approx. 2,795 × 1,600 × 1,295 mm Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of supply: Instron 5584 Universal Testing Machine Instron 5800 Controller Base Extension Model 2910-061 Industrial PC Monitor Keyboard Mouse Operator console Test plates / compression tools Technical documentation Other accessories as shown in the pictures Availability: upon agreement. Scope of supply as shown in the pictures. The workbench shown in the picture is not included in the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Klodpfszlidtsx Aiaew Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Control System: Programmable color touch control panel Ethernet network interface RS232 interface Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Kjdpfx Aiszlgyrsajlw Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: Kljdpfx Aiezlccisaow all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Kledpfozk A Ebox Aiaew Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BX1-FR100SN.A4K-004, For sale is a high-quality Zwick/Roell material testing machine, consisting of: Load frame Z100 Machine type, axial: BX1-FR100SN.A4K-004 Machine type, torsion: BXC-TD0500.A4K-002 Force sensor, type Series K (100kN) Torque sensor, type Series NM (500Nm) Various ZPVs (Central Test Specifications) Kljdezkugkepfx Aiajw The system comes from a laboratory setting and was used for mechanical material testing. All devices are used, well-maintained, and fully functional.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Kjdezktr Sjpfx Aiajlw Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), INSTRON 4507 Universal Testing Machine Manufacturer: Instron Limited, High Wycombe, England Type: 4507 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Maximum Test Force: 200 kN For sale is a used electromechanical universal testing machine, INSTRON 4507, series 4500. The testing system is suitable for tensile, compressive, and material testing of metals, plastics, composite materials, and other materials. The system features a microprocessor-controlled load frame, separate control cabinet, operator console, industrial PC, and extensive accessories as shown in the images. Technical Data Manufacturer: Instron Limited Series: 4500 Model: 4507 Country of Manufacture: Made in England Ksdezktavepfx Aiaslw Maximum Static Test Force: 200 kN Supply Voltage: 240 V AC Mains Frequency: 50 / 60 Hz Current Consumption: 10 A Machine Weight: approx. 1,330 kg Operator Console Separate digital operator console Microprocessor-controlled control Alphanumeric display (16 digits) 32 function keys Display for force, stress, and strain values Filter and calibration functions Data interface Programmable test sequences Dimensions (W × D × H): 355 × 470 × 267 mm Weight: approx. 7 kg Cable length: 4.5 m Control Cabinet Electronic control cabinet, series 4500 Standard equipment: Overall control Load frame control Force control Preparation for recorder interface Preparation for strain monitoring Dimensions (H × W × D): 635 × 280 / 380 × 394 mm Weight: approx. 32 kg Cable length to load frame: 3.5 m Equipment Electromechanical load frame 200 kN load cell Hydraulic grips Operator console Electronic control cabinet Industrial PC Monitor Keyboard Mouse Emergency stop device Digital control, series 4500 Accessories as shown in the images Applications Material testing Tensile tests Compressive tests Material characterization Quality assurance Testing laboratory Research and development Universities Automotive industry Plastics and metal testing Environmental Conditions Operating temperature: +10 °C to +39 °C Storage temperature: -40 °C to +66 °C Relative humidity: 10–90% (non-condensing) Shipping Data Machine weight: approx. 1,330 kg Control cabinet: approx. 32 kg Operator console: approx. 7 kg Transport on a pallet or by a freight forwarder is required. Condition Used. The machine was last used in an industrial setting. Optical condition as shown in the images. Normal age-related signs of wear are present. Scope of Delivery INSTRON 4507 Universal Testing Machine 200 kN load cell Hydraulic grips Operator console, series 4500 Electronic control cabinet Industrial PC Monitor Keyboard Mouse Operating manual Other accessories as shown in the images Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Kodpfx Aijzkhxtjaolw Thread size: M8 Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate Kljdezkhv Sspfx Aiaow For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.