Concadas GmbH

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: UNTHA 1, power: 22 kW (29.91 HP), Untha RS 30 4S – Year of manufacture 1992 Cable shredder, pre-shredder, chip shredder, two-shaft shredder, rotary shear, rotary knives, chip shredder Dedjyhzwcopfx Afnskh Power: 400V, 22kW with pump station, with control system Includes 5m long screw conveyor and inclined belt conveyor Ideal for pre-shredding cables (including plug ends), plastics, metals, wood, etc. Very robust motor and gearbox Very good condition Collection by appointment only in 75053 Gondelsheim Shipping via freight company possible, please provide postal code for inquiry

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Dkodpjyhzhzjfx Afnjh Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Djdpeyhzhuefx Afnekh Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: excellent (used), Year of construction: 2010, Infeed 500 x 400 (mm) Dkjdpfx Aeyhpm Ujfnjh

Condition: excellent (used), functionality: fully functional, motor power 11kW bin dimensions 940x700mm Dodpfx Afjyhdl Sjnokh hydraulic pressure unit shaft length 700mm shaft speed 110 RPM capacity 180-220 kg/h

Condition: used, Year of construction: 2015, operating hours: 9,800 h, functionality: fully functional, EQUIPMENT DETAILS: Model: DW3060 Rotor: 21 teeth/bolted hammers Dksdpfx Aeyha S Isfnjh ENGINE: MTU (Mercedes Benz) 450 HP Chassis: 3 axles with tandem wheels Hydraulic front support Remote control Auto-feed Rubber discharge belt Year of manufacture: 2015 Operating hours: 9800 h Registration number: 67.04.152-1

Condition: used, Year of construction: 2023, operating hours: 2,650 h, functionality: fully functional, BRAND: ALBACH Djdpfx Aoyha Shefnekh MODEL: Diamant 2000 YEAR: 2023 HOURS: 2650 (engine), 1550 (rotor) EXTRAS: SERIAL NUMBER: REGISTRATION NUMBER: 100.23.XX-1 MAN engine, 790 HP

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) Djdpfxeyha Rwj Afnokh - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: excellent (used), Catalogue number 7836 TECHNICAL DATA - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm - Screen 25mm - Hydraulic pusher drawer Dkedpsyg Iqpjfx Afneh - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Operating hours: Dkodpfx Afeyg Hw Iensh

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E Dkjdpfxeyg E Swo Afnoh - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition Dkedpfx Afoyg E Sksneh with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric Dsdpoyg E Sdsfx Afnokh including control cabinet fully overhauled new couling unit READY FOR DISPATCH

Condition: used, Year of construction: 2004, Machine number 500-4651, 15 kW motor, shaft width 600 mm, shaft depth 800 mm, rotor Dodpfx Asygwbqofnskh

Condition: used, Year of construction: 2025, We present our latest model of disc chipper, WOODGRAIN BX52RS, designed for effective shredding of branches, tree trunks with a diameter of up to 12 cm, as well as offshoots up to 25 cm. It is not just a chipper - it is an advanced tool that integrates modern solutions for even better efficiency and safety, in accordance with the latest EU directives. EQUIPPED WITH A SAFETY SWITCH that allows immediate disconnection of the power supply, and consequently prevents or minimizes the risk!!! BE CAREFUL ABOUT COUNTERFEITS, DANGEROUS DEVICES WITHOUT A SAFETY SWITCH ARE NOT ALLOWED FOR SALE UNDER POLISH LAW!!! The distinctive features of this model are the hydraulic material feeding system, which makes work even more effective. The new generation of the hydraulic system, with its own pump and oil tank, ensures not only safety but also efficiency. Additionally, the chipper has been equipped with its own hydraulic pump and hydraulic oil tank, powering two rollers feeding material to the knife disc. The drive from the tractor to the chipper is transferred by means of a transmission shaft, and the material collection mechanism is characterized by a smooth 10-step collection speed regulator, a material withdrawal function and an emergency stop. Work safety has been raised to a higher level thanks to safeguards and covers. The massive cutting disc with a diameter of 63 cm and a thickness of 2 cm is another advantage of the chipper. Considering the weight of the disc, which is 65 kg, the chipper does not burden the engine to a large extent, which distinguishes it from drum or roller chippers. The disc is equipped with 4 double-sided sharpened knives and one counter knife mounted in the chipper base. Additionally, the breakers (shovels) that crush the obtained chips to a value of 20-50 mm make the shredding process even more effective. The chipper also has a disc locking latch, facilitating the replacement of knives, and the produced chips are thrown out through a pipe rotated 360 ° in relation to the chipper base. Additionally, as part of our promotion, we are including a FREE PTO shaft. This is an ideal tool for professionals who value not only efficiency, but also innovative solutions and safety. Technical parameters Size of shredded material 12cm diameter (maximum 25cm with offshoots) Drive system Drive from the tractor engine transmitted through the PTO Minimum power 30 HP Dkedpfx Aoygtv Rofneh Rotor size 63 cm Number of cutting knives 4 + 1 counter blade Knife type hardened tool steel CR12 Rotor weight 58kg Material Feed Mechanism Own hydraulic pump driving two shafts Fastening system three-point suspension system (TUZ) Dimensions 195 cm L x 135 cm W x 190 cm H Feed hopper 82x60cm Ejection tube rotation range 360° Ejection tube height 190 cm Rated RPM/Rated RPM 540-1000 per minute Wood chipper weight 480kg WARNING! THE MACHINE COMES FROM A RETURN. DEFECT: IT DOES NOT DISCHARGE SMALL, MOIST BRANCHES.

Condition: good (used), Year of construction: 2004, operating hours: 15,660 h, functionality: fully functional, color: orange, For sale: Doppstadt DZ 750 Kombi – slow-speed shredder + high-speed chipper. The machine is accident-free. - Year of manufacture: 12/2004 - Mercedes-Benz diesel engine - Operating hours: 15,660 mth Dsdpfx Aeygr Tnefnokh - Weight: 46 t - Magnetic separator - Possibility to use different shredding screens - Machine after inspection/service - Tyre condition: 70% - Tyre size: 385/65R22.5 - Easy operation The machine is in continuous use. Please contact for further information.

Condition: refurbished (used), Year of construction: 2008, operating hours: 3,119 h, Doppstadt DH 910 Panther - Year of manufacture: 2008 - Engine: Mercedes Benz - Operating hours: 3119 - Remote control Djdpfx Aeygnnbefnekh - Weight: 25,000 kg The machine is fully overhauled and immediately available.

Condition: excellent (used), Year of construction: 2015, Rainbold AZR 800s mill, in excellent condition Dsdpsygdlcefx Afnskh

Condition: used, Motor 90 Kwt Dkjdpsygcy Ssfx Afnoh

Condition: good (used), Year of construction: 2021, Rotor 264 mm Feed opening approx. 510 x 815 mm Rotor length approx. 510 mm Motor 15 kW Knives 24 Screen 15 / 20 mm (can be exchanged) Djdpfoyf D Riex Afnokh Technical specifications on request

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation Dsdpfeyfw D Nox Afnekh - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM Dodpfx Afoyfwxgjnjkh ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2011, Mus Max WT 11 Penz 96Z crane year 2011, chassis Man TGS 33-540 6x6 drive Dedpfx Aeyfu Ekefnekh damaged transfer case of the chipper drive (speed converter)

Condition: like new (used), Year of construction: 2023, operating hours: 708 h, functionality: fully functional, machine/vehicle number: SH11537, power: 11 kW (14.96 HP), overall weight: 650 kg, fuel type: electric, color: yellow, empty load weight: 650 kg, - Year of manufacture: 8/2023 - Only 208 operating hours! - Drive power: 11 kW - Screen perforation: 11 mm Dkjdpeyfiqbofx Afneh - Rotor diameter: 248 mm - Number of reversible cutting inserts: 14 - Feed opening: 516x830 mm - Ø extraction connection: 160 mm - Required extraction speed: 22 m/s - Machine weight: approx. 650 kg - Can be tested on site

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2 Dkodpsyffi Tefx Afnsh