Staklija UAB

Condition: used, Year of construction: 1976, pressing force: 1,000 t, Manufacturer: EUMUCO Model: SP 100 Year: 1976 Condition: Used, In working condition Press Capacity: 1000 tons Table Size (mm): 850 x 1250 Slide Stroke (mm): 250 Strokes per Minute: 100 Last Overhaul: 2021 Slide Size (mm): 730 x 760 Slide Adjustment (mm): 17.5 Number of Pressure Points: 1 Number of Slide Guides: 4 Slide Adjustment System: Wedge Shut Height (mm): 820 Kjdpfxsyitwgo Ab Tjln Front Opening Between Uprights (mm): 880 Side Opening Between Uprights (mm): 300 Weight (tons): 50 Motor Power (kW): 55 Electrical Cabinet Condition: Completely renewed in 2021 Additional Information: Hydraulic lower ejector, stroke 100 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 63KJ, 63 kJ LASCO hot forging press available for sale. The machine was purchased in working condition; however, due to changes in production scheduling, it was never commissioned at our facility and has not been put into operation by us. The press is in good overall condition and is visually clean and well maintained. Renowned for its robust and reliable construction, this model is suitable for a wide range of hot forging applications. The machine can be inspected on site. Prospective buyers are welcome to carry out their own technical inspections and assessments. Technical details and pricing will be provided upon request. Kodpfx Abjyh Atxo Tjln

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Forging Press (DCS-20) Technical Specifications - Press Pressing capacity: 5–20 t (adjustable) Maximum installation height: 700 mm Table usable area: 500 x 600 mm Ram usable area: 500 x 600 mm Kjdpoyght Rjfx Ab Tsln Frame type: C-frame Table height from floor: 800 mm Overall dimensions (W x D x H): approx. 1,450 x 1,500 x 2,400 mm Total weight: approx. 1,900 kg T-slots: according to DIN 650 (18 mm) or machined to customer specifications Hydraulic Cylinder Piston stroke: 0–500 mm (adjustable) Cylinder diameter: Ø 90 mm (1 pc.) Piston rod diameter: Ø 60 mm (1 pc.) Rapid traverse cylinder diameter: Ø 40 mm (1 pc.) Rapid traverse piston rod diameter: Ø 25 mm (1 pc.) Max. working pressure: 250 bar (adjustable) Return speed: 140 mm/s Rapid traverse speed: 140 mm/s Pressing speed: 4–10 mm/s (adjustable) Pressure build-up time (closed tool): max. 2 s (steel on steel) Hydraulic Unit Hydraulic pump: REXROTH, 22 l/min (1 pc.) Motor power: 7.5 kW (1 pc.) Pressure accuracy during pressing stroke: ±5 bar Oil tank capacity: 150 l Mounting: Hydraulic unit mounted at the rear/top of the press Hydraulic manifold and valves: HYDROPACK Air filter and oil filter: FILTREC Oil level: electronic oil level switch Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Main hydraulic motor connection: 7.5 kW Total connected load: approx. 10 kW

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Kledoycl Idopfx Ab Tsn Manufacturer: GFU Model: HP 200 Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Kjdpfx Aboyacyxj Tjln

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Klodox Ezuyspfx Ab Tsn Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: used, Force 1600 tons Slide stroke 300 mm Distance adjustment between table and slider 10 mm Slide strokes per minute 75 spm Length of a rod 920 mm Kljdpfjx Ek Ntex Ab Ton Closed height (min distance table–slide) 660 mm Table dimensions 940 × 1200 mm Table height above floor level 450 mm Slide dimensions 860 × 910 mm Lateral window (h/w) 560x600 mm Main motor 110 kW Dimensions 5060x3940x5125 mm Press weight 120 tons

Condition: used, Year of construction: 1982, functionality: fully functional, Eccentric; 15 kW; Capacity 150 t; strokes per minute 120; ram stroke 175 mm Kjdpfjxz A H Tjx Ab Tjln

Condition: ready for operation (used), functionality: fully functional, total height: 3,200 mm, total length: 3,500 mm, total width: 1,500 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Ram weight: 400 kg Blow frequency: 120/min MACHINE DETAILS Total weight: 10,000 kg Overall height: 3,200 mm Kljdowvi Hxepfx Ab Tjn Overall length: 3,500 mm Overall width: 1,500 mm

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Kedpfxowiwpue Ab Teln

Condition: good (used), total height: 3,200 mm, total length: 3,500 mm, total width: 1,500 mm, overall weight: 10,000 kg, - Bear weight: 300 kg - Beat frequency: approx. 120 beats per minute Klodjwin Stspfx Ab Ton

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Klodpfowbginox Ab Ton Weight of the machine, kg: 27'000

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 8,000 kg, SPECIFICATION MODEL CBF-103L(2018) NO.OF FORGING STATION 3 PORGING LOAD(KG) 8000 MAX.CUT-OFF DIA.(MM) Ø12 MAX.CUT-OFF LENGTH(MM) 192 MAX.OUT.PUT.(PCS/MIN) 140 P.K.O. STROKE(MM) 15 K.O. STROKE(MM) 162 MAIN ENGINE (HP) 30 CUT-OFF DIE DIA.(MM) Ø45*59L PUNDH DIA.(MM) Ø53*200L MAIN DIE DIA.(MM) Ø75*200L MACHINE WT.(KG) 19000 Klsdpfxsv Iakme Ab Ton NORMAL SIZE OF BOLT(MM) 6-10 SHANK LENGTH OF BLANK(MM) 30-152

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm Kjdpfovzxpbjx Ab Tjln power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t Kedpfxovuulls Ab Tjln weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Kljdpfx Aovbcxteb Ton Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] Ksdpfx Absuhb T Do Tjln - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] Klodpfsuhb Twox Ab Ten - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] Ksdpsuhb Tqofx Ab Teln - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] Kjdpfx Absuhb Tkj Tsln - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: good (used), Year of construction: 1973, functionality: fully functional, total height: 3,760 mm, pressing force: 1,250 t, total length: 6,400 mm, total width: 4,365 mm, table length: 820 mm, operating pressure: 7 bar, table width: 260 mm, throat depth: 700 mm, overall weight: 135,000 kg, pressure: 7 bar, stroke length: 220 mm, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Kljdpfxeuby N Ds Ab Ten Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Total weight, circa: 135 000 kg.

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Kljdpfx Abeubb Ste Tsn Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request Klodpfx Absrt Uc Ee Tjn

Condition: used, Year of construction: 1999, ram hammer weight 26 kg ram hammer stroke 200 mm type KO 596 no. of strokes 220 Hub/min Kedpfx Ajqwpxbjb Tsln air hammer

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec Kjdpfx Absdxvfps Teln :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?