ICF Wood

Condition: good (used), Year of construction: 2011, sawdust dryer capacity: 400 kg/hour prices in thousands (currency unspecified): Dryer 35 Crusher/hammer mill 7 Boiler for wood waste 5 Feeding screw conveyor, 6 m 3.8 Belt conveyor, 2 units 2.6 Sorter with hopper 4.5 Screw conveyor, 6 units 6.6 Exhaust fan with cyclone 1 Hopper with drive, 2 units 6 Packing machine 3.5 Tank for wet sawdust 1 Fuel tank 1 Tedpfxez E A Trs Aknec

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Tjdpfx Akoz Dtukenjc

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Tjdsz A S Imspfx Aknoc Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm - Usable length of the pallets: 7100 mm - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. Tjdoz Alhiopfx Aknsc If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Tsdjzz Sapjpfx Aknec Functional.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: Eberl dryer. Tsdezz A Spepfx Aknsc For more information, call 504-551-431.

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return Tjdpozzk H Uofx Aknoc - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F Tsdpfxezyk D Do Aknjc The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Tedjzw Apgepfx Aknec Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2018, Technical equipment of an industrial wood drying plant for sale For sale is the technical interior equipment of an industrial wood drying plant. The technical components are being sold without the chamber building or structural shell. Equipment / Scope of supply: Todpfx Akozwb Dvonsc * 16 measuring units * 12 fans/blowers with heat exchangers * Fan diameter: approx. 2.60 m * Heat exchanger dimensions: approx. 1.35 m width × 3.10 m height * 24 fan motors, each with 4 kW power * Total installed motor power of the fans: 96 kW * Complete control and regulation technology * Control computer with Viso+ * Supply and exhaust air technology * Other technical components belonging to the drying plant The equipment comes from a professional wood drying plant and is suitable for reuse, expansion, or modernization of existing drying chambers, as well as for the construction of new drying chamber systems. The technical drying equipment, including fan, heat exchanger, exhaust air, and control technology, is being sold – without the chamber building.

Condition: used, functionality: fully functional, Honeycomb machine Honicel DEX3: - Fully functional - Has not been in operation for approximately 1 year, but was reliably used to heat paper honeycomb for 2 years prior. - Maximum workpiece width: 1200 mm Tedpfxjzv Sz Ae Aknjc - Workpiece thickness: 90 mm - Weight: approx. 1.1 t Perfectly suited for removing moisture from paper honeycomb and solidifying the honeycomb structure for further processing.

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Drying chamber Manufacturer: BigonDry Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors - Wind resistance: 110 km/h - Snow load: 200 kg/m2 Tedpezu Amajfx Aknec - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Todpjztvf Tefx Aknoc Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Tsdpeztrpzsfx Aknoc Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Tsdjzqu Hkjpfx Aknsc

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. Todpfxjzn Au Rj Aknoc capacity: 2.5 tons per hour.

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Features and technical specifications: - fully installed dryer with trolley, high-performance radial fan, electric heating, - Air inlet and outlet flaps, safety thermostat, spray system - Lift-and-swing door for convenient opening and closing of the dryer - Internal cladding: all side walls are made of special seawater-resistant aluminium - The stainless steel shelves are permanently resistant to aggressive substances found in wood, such as tannic acid, etc. - The sealing of the joints is completely durable and also allows for steaming within the unit - Stack dimensions: 530 x 105 x 115 cm - Stacking capacity: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heating: 12 kW Tedpfx Akozk N Suensc - Motor: 1.1 kW / 400 V - with MP 902 control unit Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2024, I sell the wood drying chamber Logosol WDU Including humiditiy measuring unit Elbez WHT 740 Machine NEW, not used before ! Available immeditely. Tedpfx Akszkb Rienoc

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 17,000 h, power: 7 kW (9.52 HP), temperature: 70 °C, inner dimension length: 6,000 mm, inner dimension width: 2,800 mm, inner dimension height: 2,500 mm, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, Incoplan DRY 6 model for sale. Capacity: 14-20 m3. Maximum wood length: 6000 mm. Bundle dimensions: 6000 mm x 120 mm x 120 mm. Number of bundles in the drying kiln: 4. Accessories: 8 m high chimney, manufactured in 2018. Tjdpfx Akjziwq Njnoc 2000 L hot water tank, manufactured in 2018. 100 kW wood-fired boiler, manufactured in 2000. The demolition is the responsibility of the buyer or seller, as agreed.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C Tsdjzg Iw Ispfx Aknec More technical details available on demand. On site inspection and testing are possible.

Condition: used, Capacity for sawn timber: approx. 1 m³, max. sawn timber length: 5000 mm. Tsdpfxjzda D Ao Aknec Tank capacity: 1925 l External dimensions: 620 x 100 cm Heated with hot water.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Tedpfx Akszbau Nonec

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,100 mm, total length: 10,000 mm, total width: 1,900 mm, Equipment: CE marking, Drying oven used for lacquered and painted sheets. Tjdpfezbat Eox Aknsc

Condition: used, Technical specifications: Capacity: 3 m3 Integrated pump Shelf length: 3000 mm Shelf width: 1100 mm Dimensions: Height: 2700 mm Width: 2500 mm Length: 4700 mm Tsdpfxezabk Ao Aknsc

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Todpsy Uydlsfx Aknsc