Southern Engineering Equipment

Condition: good (used), Internal item no.: 26018 Weiler Matador Lathe Machine no.: 7325 Nkedpfx Agjym Upxe Ieu + Chuck guard (UVV compliant) + 3-axis digital readout The machine is equipped as follows: - Various collets with draw tube - Multifix "A" tool post - Multifix toolholder including clamping holder - Röhm 160 mm 3-jaw chuck, incl. reversible jaws - Change gears - Live center - Machine feet - Coolant pump Technical data: Center height: 140 mm Center distance: 500 mm Speed: 30 – 3550 rpm Spindle bore: 36 mm Short taper spindle nose DIN 55022-5 Tailstock MT3 Dimensions (LxWxH): 150 x 65 x 150 cm Weight: 700 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80011, turning diameter over bed slide: 260 mm, center height: 130 mm, turning length: 500 mm, spindle speed (max.): 3,135 rpm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Nkjdjym Udpspfx Ag Ieu TECHNICAL DETAILS Turning length: 500 mm Swing over bed: 260 mm Swing over cross slide: 200 mm Centre height over bed: 130 mm Centre height over cross slide: 100 mm Spindle bore: 22 mm Spindle speed: 13 to 3,135 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,500 mm Weight: 500 kg EQUIPMENT Tailstock Quick change tool post Collet chuck 8 additional tool holders External reference: Pieper - Lot 61

Condition: not inspected (used), functionality: unexamined, turning diameter: 280 mm, center height: 145 mm, center width: 750 mm, spindle speed (max.): 3,500 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 178 mm Centre height: 145 mm Centre distance: 750 mm Spindle speed: 70 – 3,500 rpm Spindle bore: 35 mm Spindle nose: D 1-3 Tailstock taper: 3 MT Leadscrew diameter: 25 mm Thread: 6 mm pitch MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 11 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,800 mm Nkodpfx Agsym N D Rj Iou Weight: 800 kg External reference: Neuburger

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe – Toolmaker Precision with 3-Axis Digital Readout from K&C, NEW! Technical Data: - Year of manufacture: 1988, Machine No. 89-160-1292 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2,500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Engagable spindle brake - Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m Included Equipment and Features: - NEW K&C 3-axis digital readout, 12-month manufacturer's warranty, including operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick reset to zero, change of counting direction - Collet chucking device with collets from 1 to 29 mm, in 0.5 mm increments - 160 mm three-jaw chuck with 1 set of jaws - Multifix quick-change tool post size A with 2 tool holders - Bed stop - Rear panel Nsdpfx Agsymdy Ts Isku - Machine feet - Electronic spindle safety guard - Operating manual Safety Equipment: Electronic spindle guard, covered lead and feedscrew, 2 emergency stop buttons, spindle brake, electronic change gear door safety switch About the Machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This excellent lathe comes from a training workshop. All of the slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and enables surface finishes comparable to grinding. Take advantage of the opportunity to see and test the machine under power on site, and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 Nkedpfeymdymox Ag Ieu - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolmaker Precision and New 3-Axis Digital Readout from K&C!!! Technical Data: >> Year of manufacture: 1988, Machine No. 88-140-1386 >> Center height: 140 mm >> Distance between centers: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake engageable >> Length 1.6 m, height 1.25 m, depth 0.7 m Equipment and Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer warranty with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch >> NEW collet chuck, collets from 3 to 25 mm in 1 mm increments (NEW) >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size A with 2 tool holders >> Bed stop >> Rear guard >> Machine feet Nedsymdu Djpfx Ag Ijku >> Electronic spindle protection >> Operating manual Safety features: Electronic spindle protection, lead and feed screw guard, 2 emergency stops, spindle brake, electronic interlock for gear change cover About the Machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This lathe comes from a training workshop and is in excellent shape. The slides run smoothly and evenly. The machine runs quietly even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take this opportunity to view the machine under power on site and see the condition for yourself.

Condition: good (used), Specifications: - Conventional lathe - Digital display (230V single-phase power supply) - Longitudinal travel 850 mm, cross travel 205 mm, top slide travel 95 mm - Programming of 200 auxiliary zero points Nedpfxjyl Sl Ij Ag Ieku - Tool magazine for 200 tools - Taper measurement - Reinforced prismatic bed, made of grey cast iron, induction hardened and ground - CAMLOCK D1-4'' type spindle nose - Spindle hardened and ground, oil bath lubricated, mounted on 2 high-precision tapered roller bearings - Turning accuracy < 0.015 mm at the chuck - Gearbox gears hardened and ground, oil bath lubricated - Backlash-free slides, adjustable via gib screws - Quick change of feeds by mechanical gearbox - Automatic longitudinal and cross feeds - Simultaneous control of the spindle and leadscrew - Lateral movement of tailstock +/- 10 mm - Maximum swing over carriage: 212 mm - Maximum swing in gap bed: 491 mm - Left/right spindle rotation reversal on apron control - Jog function - Resettable graduated dials on all axes

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Broaching Machine for Lubrication Grooves - Maximum machinable diameter: 140 mm - Spindle bore: 40 mm - Groove length per stroke: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good / fully operational condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Nksdsyl R Etopfx Ag Ieu Subject to errors and omissions

Condition: good (used), Emco Compact 10 Lathe Made in Austria. The machine is in perfect condition, practically unused. The machine comes from a maintenance workshop at a printing house. Nsdpfxeyl Rz Us Ag Isku It has not been used in production. Accessories are included.

Condition: good (used), functionality: fully functional, GDW Lathe Millenium Edition Machine type: Conventional center lathe (L+Z) Manufacturer: G.D.W Model: LZ250 Millenium Edition Year of manufacture: unknown Control: conventional Origin: Germany Location: Albstadt Nksdpfoyk S U Hjx Ag Isu Delivery time: by arrangement Technical data: - Distance between centers: 500 mm - Center height: 125 mm - Spindle bore: 38 mm - Tailstock: Morse taper 3 - Weight: 600 kg - Dimensions: 1300 mm x 700 mm x 1400 mm Accessories: - Tool holder - Digital readout - Coolant system - Collet set - Machine lamp

Condition: good (used), functionality: fully functional, This machine is a true rarity and a real gem. It is in immaculate condition and it is rarely found in such flawless state. In line with the standard practice in the past, the machine is equipped with a high-quality Georgii Kobold motor and a Siemens frequency inverter. The machine operates extremely quietly, and its speed can be smoothly regulated via the inverter. Upon request, many additional functions can be programmed. Connection is made via a standard 230 V Schuko plug. It is possible to switch to 400 V power supply at any time. The machine has been carefully mounted on a custom-made base constructed from solid beech wood. The screws come with individually manufactured inserts. Nkedpeykmzhjfx Ag Ieu Five high-quality bolt-on vibration dampers are located on the underside of the machine, enabling gentle and safe placement and operation on any surface. The following accessories are included: - One unused 3-jaw chuck (80 mm) with internal and external jaws, wrench, and backplate - One unused 4-jaw WMW chuck with internal jaws, wrench, but without backplate - One unused backplate with drive pin, also suitable for faceplate turning - Two live/dead centers - Thread cover/knurled nut - Manual lever for various quick couplings on the machine

Condition: good (used), Year of construction: 1995, MYFORD MG 12-ME Technical Details • Grinding diameter: 76 mm Nsdjykbmfopfx Ag Ioku • Grinding length: 304 mm Complete electrical equipment for 220/380 V, three-phase current, hydraulic pump and tank, grinding wheel 300x40x127 mm, grinding wheel flange, balancing arbor, dressing device, 2 centres, complete coolant system, splash guard, oil press, operating keys

Condition: excellent (used), Myford 254s x 22 Tool Room Lathe Condition Used Stock Number 00195 Distance Between Centres 22” Swing Over Bed 10” Spindle Speeds 53-2000rpm Imperial machine Tail stock morse taper 2 Fixed and travelling steady 6" 4 Jaw chuck 5" 3 jaw chuck 11" Faceplate Njdpsyka Twofx Ag Ioku Single phase 230v

Condition: good (used), functionality: fully functional, Type 4 Nkodpfx Aeyizknjg Ieu Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: good (used), Year of construction: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, center distance 500 mm, max. turning diameter over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix toolholder, 24 longitudinal feeds, metric threads, imperial threads. Nsdpfxsyh Hkhs Ag Ijku

Condition: good (used), Year of construction: 1982, Used small lathe from TOS Type: SM 16 A Max turning diameter: 220 mm Nedpfx Aeyh Haijg Isku Turning diameter over bed: 110 mm Chuck diameter: 150 mm Spindle bore: 35 mm Max turning length: 450 mm 2-axis digital readout

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and face Nkedeyg Rfijpfx Ag Ieu Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Mains connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX size A quick-change toolpost with 3 interchangeable holders - revolving centre - emergency stop - folding chuck guard - coolant system - very low operating hours Space requirements L x W x H: 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: good (used), Stock number: 3074 Nkjdpjyg N E Uefx Ag Iju Brand: Weiler Year of manufacture: Type/Model: LZD 220 Machine number: Control: conventional Centre distance: 400 mm Spindle bore: 23 mm Centre height: 110 mm Swing diameter over bed: 220 mm over cross slide: mm Speed range: 50 to 2,000 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Connected load: 0.4 kW Accessories/Equipment: quick-change tool post Condition: good Weight: 280 kg Dimensions: 1,100 x 600 x 1,200 mm

Condition: good (used), Year of construction: 1989, Lathe is in good condition, 1 meter between centers, 210 mm center height. Original paint, little used! Multifix B, various holders included. + 1 box with turning tools. Njdpjygbcrefx Ag Isku

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Weiler Praktikant VC Precision Centre Lathe Year of Construction 1999, 3-Axis Siemens Digital Display with AC Drive, Infinitely Variable Spindle Speed, CE Compliant!!!! Technical Data: - Year of manufacture: 1999, Machine No. 82 - Centre height: 160 mm Nkjdpfx Agjyapwdj Ieu - Distance between centres: 650 mm - Spindle speeds: up to 4000 rpm, infinitely variable - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse Taper MK 3 - Feed rates: 0.02 to 0.63 mm/rev - Cutting threads: Metric, Inch, Module and Diametral Pitch - Metric thread pitches: 0.25 to 8 mm - Weight: approx. 920 kg - Spindle brake, switchable - Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Features: - 3-axis Siemens digital readout - Quick collet chucking device for collets from 2 to 29 mm, in 1 mm increments - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix size A with 3 tool holders - Electronic chip guard - Change gears - Machine feet - Splash guard About the Machine: Offered for sale is a Weiler Praktikant VC lead and feedscrew lathe from year of manufacture 1999, in very good condition. The control system, in combination with the precision centre lathe from Weiler, provides the following functions: graphical display of travel distance and direction, graphical representation of the scale system on the lathe, compensation for tool offset, zero point shifting for workpiece position compensation, radius/diameter switching, graphical display of the main spindle rotation, graphical display of the machine’s speed potentiometer position. A very fine lathe featuring an AC drive with infinitely variable spindle speed. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and is capable of producing surface finishes comparable to grinding. The digital readout makes operation even easier and more precise. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Nkedpsyalurjfx Ag Iju Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: like new (used), Myford 254s Single Phase 220v Lathe Excellent condition like brand new hardly used Distance between centres 22" 10" swing Nkedjx Utymopfx Ag Iju Imperial machine Spindle speeds 53-2000rpm Tail stock morse taper 2 Fixed and travelling steady 6" 4 Jaw chuck 5" 3 jaw chuck 11" Faceplate Single phase 230v

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Nodpfx Ajx Utc Ieg Ioku Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Nkjdsx Rrpfepfx Ag Ieu Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Nsdpfx Agsx N A N Ho Ioku Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck