T.I.S GmbH

Year of construction: 2020, condition: used, Linear liquid filling machine for canisters and bottles. Manufacturer: HEN-MASZ, Połczyn Model: NBP-5 Capacity: 5 L – approx. 1000 bph Ibodpfx Adjxxl T Do Ded 2 L – approx. 2000 bph Year of manufacture: 2020 Additional equipment can be connected to the machine Technical documentation (electrical diagrams and filler settings) Used machine

Year of construction: 2009, condition: ready for operation (used), A Heuft inspection machine for the beverage industry is available. Container diameter range: 40mm-100mm, container height range: 150mm-360mm, max. inspection capacity: 72000containers/h, fill level inspection: ultrasonic, closure inspection: camera system. Only the inspection unit including cameras and control panel is offered. The discharge unit is not included. Documentation available. An on-site inspection is possible. Ibsdpfexu I Ayex Ad Dod

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZOF01, type of input current: three-phase, total width: 900 mm, total length: 1,200 mm, total height: 2,200 mm, input voltage: 220 V, workpiece weight (max.): 450 kg, pass-through height: 1,200 mm, Equipment: CE marking, This filling machine could be linear tor rotary type which is designed according to customers capacity and filling volume. It suits different size of plastic and glass bottles, and the height of the filling nozzles is adjustable. The filling nozzles are made of SS304 or 316, resist high temperature filling. drip-proof , via photoelectric detection to ensure no bottle no filling. Isdpjxul Igjfx Ad Debd Widely used for liquid and paste filling. Also can be customized for other types of filling based on customer requirement.

Year of construction: 1999, condition: ready for operation (used), A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered. Iedpfsxtfg Tjx Ad Djbd

Year of construction: 2021, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, CODI DPL - 250 DEPALLETISER Iedpfsxtavvjx Ad Djbd LOWERATOR 6 HEAD COUNTER PRESSURE FILLER AND SEAMER NITRO DOSER SET FOR 250 ML CANS, CHANGE PARTS

Year of construction: 2019, condition: ready for operation (used), A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible. Ijdoxqqmgspfx Ad Djbd

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine designed for the automatic filling and packaging of a wide variety of products – from fine powders to granular or coarse products such as nuts, pulses, rice, seeds, or snacks. It delivers high precision and ease of operation, guaranteeing maximum productivity in your operations – ideal for small, medium, and large enterprises in the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging System: Fully automated process including bag feeding, opening, dosing, sealing, and date printing, ensuring efficient and uninterrupted production. Versatile Applications: Suitable for a broad spectrum of products: Powders: e.g., flour, spices, protein powders Granules: e.g., lentils, beans, rice, nuts, snacks, seeds Granulates or blends Compatible with Pre-Made Pouches: Processes pre-made, high-quality pouches made from multilayer composite films or paper – with or without zipper. High-Precision Dosing: Features an integrated auger filler or optional volumetric dosing unit for precise filling by weight – with accuracy of ±0.3–1.5%. Intuitive Siemens Control Panel: Modern Siemens touchscreen interface for complete control of all parameters; simple and user-friendly operation. Hygienic Stainless-Steel Construction: All product-contact parts are manufactured from stainless steel 304 or 316, comply with international hygiene standards, and are easy to clean. Safety & Efficiency: Automatic fault detection prevents sealing defects or product spillage. Integrated alarms for air pressure, overload, and bag errors enhance operational safety. 🔩 Technical Data Parameter Value Model HMD-G200 Packing speed 20–45 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-made pouch with/without zipper Power consumption 2.1 kW Power supply AC 380 V ±10%, 3 phase, 60 Hz Compressed air 5–8 kg/cm², 0.4 m³/min consumption Noise level ≤ 80 dB Bag opening Vacuum suction Additional features Date printing, nitrogen flushing, vibration, air exhaust 🧠 Brand-Name Components Component Manufacturer Touchscreen & Controls SIEMENS Frequency inverter Bosch Rexroth Temperature controller/relays OMRON Pneumatics/valves AIRTAC / Festo Isdpfx Asxqccmjd Debd Vacuum pump ORION 🚀 Scope of Delivery Auger filler for powdery and fine-grained products Stainless steel screw conveyor for automatic product feeding Integrated date coding printer Horizontal conveyor belt for discharging finished pouches 💡 Your Major Benefits ✅ Labor cost reduction via full automation ✅ High output speed with consistently high quality ✅ Flexible application for powders, nuts, pulses, and mixtures ✅ Hygienic, dependable, and low-maintenance ✅ Simple operation with intelligent Siemens controls

Year of construction: 2022, condition: excellent (used), functionality: fully functional, For sale: Industrial pump mounted on a robust steel trolley with work shelves and transport wheels. The unit is equipped with a high-power electric motor with a guarded drive shaft and hose connections. Technical condition: • Used equipment, sourced from an operational installation. • Mechanically sound, with visible signs of use. • Ideal for further industrial use or as a base for refurbishment. Specifications and features: • Electric-driven pump: IDROPRES TYPE E 320 XY L/P • Heavy-duty industrial electric motor: pro-MOTOR ms 80 3-4 Ibsdjxft A Hspfx Ad Ded • Integrated gearbox • Steel trolley with three shelves and transport wheels • Control panel with emergency stop button (STOP mushroom) • Includes cables and hoses Applications: • Chemical industry • Paint/coating industry • Testing and laboratory installations • Pumping liquids of various viscosities Personal collection or shipping after arrangement.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, I am offering for sale a fully automatic capping and cap application machine. This device is designed for integration into production lines – making it ideal for cosmetics, pharmaceuticals, household chemicals, oils, and other products in PET, HDPE, and similar containers. Key Information: • Functions: Iedpfx Aexftimod Dsbd - Automatic cap feeding - Precise positioning - Torque-controlled cap tightening - Touchscreen control (Siemens HMI) • Cap type: plastic (flip-top caps, disc-top, classic screw caps) • Cap diameter range: e.g., 35 mm (depends on configuration) • Throughput: up to several dozen pieces/minute (exact capacity depends on product and settings) • Drive: electric motors with gearboxes + pneumatic system • Control: Siemens HMI (touch operator panel) • Power supply: 230V • Working pressure: standard for pneumatic installations (~6 bar) • Vertical working range: up to 290 mm • Horizontal working range: up to 72 mm • Conveyor belt width: 113 mm Design and Components: • Capping head with adjustable torque control • Belt conveyor with side guides • Bottle positioning unit prior to capping • Durable frame constructed from aluminum profiles and stainless steel • Safety system (emergency stop button) • FREE: 35 mm automatic cap feeder with gravity or vibratory guide Applications: Cosmetics: creams, tonics, shampoos, oils Pharmaceuticals: syrups, supplements, ointments Household and technical chemicals Food production – oils, essences, concentrates Only your imagination limits the possibilities! Included in the set: • Complete capping and cap application line • HMI operator panel • Pneumatic system (supply, manifolds) • Manual transport and positioning system • Test run available Compatible devices for this machine are featured in our other listings. You can assemble a complete production line: - Automatic labeller for containers from 25 ml and similar - Automatic capping and cap application machine - Rotary feeding/collection table for the production line Technical Condition: • Condition: very good, fully operational • Ready for immediate use – on-site testing available • Used under controlled conditions If you have any questions, feel free to contact me – I am happy to provide additional details, send a video of the machine in operation, or arrange a demonstration. Transport / pallet loading available. VAT invoice issued.

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: Isdpfsxdy Erox Ad Dobd - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Condition: used, Year of construction: 2022, functionality: fully functional, Available for sale are 3 Minebea Intec in-line checkweigher filling stations from 2022. Unit price: €5,000 each. Ibedpexdxb Sefx Ad Ded Conveying direction: left to right Control unit position: right side (in the direction of travel) Drive unit position: left side (in the direction of travel) Ejection system: customer-supplied ejection system Weighing conveyor axle spacing: 300 mm Weighing conveyor belt width: 250 mm Weighing conveyor transport medium: standard white belt Infeed conveyor axle spacing: 300 mm Infeed conveyor belt width: 250 mm Infeed conveyor transport medium: standard white belt Discharge conveyor axle spacing: 300 mm Discharge conveyor belt width: 250 mm Discharge conveyor transport medium: standard white belt Standard conveyor height: 450-1100 mm Transport height (450-1100 mm): 740 mm Speed range: 0.2 – 1.0 m/s Protection class (IP): IP54 (standard) Photoelectric sensors: reflection photoelectric sensor (standard) Compressed air monitoring: not required Ejection monitoring CW: not required Trend controller: 3-point controller with +/- control signal Ejection monitoring MD: not required For further questions, please do not hesitate to contact us.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design Isdoxcgihepfx Ad Dobd

Condition: used, Inkjet printer with two print heads and automatic print head alignment and calibration. Additional title: dual-head inkjet printer Speed: 293 m/min 10 characters per inch; single-line Number of lines: 5 Character height: 10 mm depending on font Power: 120 W Current: 100-120 / 200-240 V Isdpfx Asw T Rwrsd Dobd Frequency: 50/60 Hz Length: 480 mm Width: 361 mm Height: 553 mm Weight: 22 kg Operation / Control: Membrane keyboard; 5.7-inch LCD display Features: Membrane keyboard; 5.7-inch LCD display; print heads with connecting hose

Condition: used, Electronic scanning for checking the lid deflection. A special sensor is fitted above the flow of bottles or cans in free flow and measurement begins after the trigger light barrier has been passed. The sensor is continuously scanned according to the measuring cycle. Faulty caps are detected and ejected on the basis of the cap deflection. Ibedew Tmpkopfx Ad Djd Additional title: with discharge Performance: 90000 objects/h Max. speed conveyor: 1,72 m/s Ambient temperature: 60 °C Power: 25 W Current: 230V AC Operation / Control: Control unit with keypad and digital display Features: Light barrier, scanning sensor, discharge BBull Soft-Push

Year of construction: 2013, condition: used, The labelling machine Labetta 4/3/10 640 2A 2Sk is constructed for labelling of different bottle types. Additional title: Cold-glue labelling Power/cycle: 7000 bottles/h Power: 8 kW Current: Permanent connection Voltage: 400/230 V Frequency: 50 Hz Compressed air: 5 bar, consumption 42 m³/h Ibsdpfx Adsw Tlmue Dod Length: 3100 mm Width: 2200 mm Height: 2200 mm Weight: 3200 kg Features: Labeller Herma 400S Periphery: 2 inspectors - L x W x H = 1,30 x 0,85 x 1,70 m - 300 kg

Condition: ready for operation (used), Our flagship product. The D250P Depositor is used for a wide range of products and applications across many industries.   Key Machine Capabilities Deposit range 19ml to 1363ml Iedew Hnt Sjpfx Ad Djbd Maximum speed at full stroke - 68 cycles/min Maximum speed at min stroke - 250 cycles/min Additional Features Ergonomically placed controls at the front and rear of the machine Cleaning and changeover procedures require no tools Interlocked hopper and rotary valve safety circuit Machined Piston seals fit the cylinder bore for extremely accurate deposits Weight control indicator detailing the percentage of stroke Large bore Rotary Valve block to enable the processing of large particulate Moveable and height-adjustable stand with 350mm flexibility A wide range of accessories is available to suit a multitude of applications

Year of construction: 2025, condition: new, functionality: fully functional, Professional meat injector from the renowned German manufacturer Reischl Lebensmitteltechnik. Ideal for industrial injection of poultry, pork, beef, fish, and cheese. - Robust, hygienic stainless steel construction - Even distribution of brine or marinade - Head with stainless steel needles – interchangeable - Liquid filtration system - Intuitive touch panel with programming capabilities - High performance and precision - Machine complies with EU standards (CE) Ijdpfow Hcvnox Ad Dobd TECHNICAL DATA: Number of needles: 46/62/123 Working width: 420 mm Width: 800 mm Length: 1635 mm Height: 2465 mm

Year of construction: 2016, condition: ready for operation (used), A complete EuroStar bottle filling line including labelling machine, aroma dosing station, and screw conveyor is available. Bottle material: PET, bottle shape: round, bottle volume: 150ml/250ml/500ml, filling capacity for 500ml PET bottles: 2500 bottles/h, bottle diameter range: 55mm–95mm, bottle height range: 100mm–250mm, labelling capacity per hour front/front+back/front+back+neck: 3000/2500/2000, control system: Siemens S7/300 and PLC. Documentation available. An on-site inspection is possible. Ibodow Dfgqspfx Ad Dod

Year of construction: 1997, condition: ready for operation (used), Indac 2 - pallet pasteurizer Ibedpfewxmhfjx Ad Dod

Year of construction: 1999, condition: ready for operation (used), A complete bottle filling line for cold and hot products is available. Bottle types: 0.25l/0.33l/0.5l vegetable/0.75l Bordeaux/0.75l fruit oasis/1l VdF/1l PET hotfill. Closure types: 28er Alu-Anroll/33er TWO/43er TWO/PET closure. Products: Cold fill CO2/pressurized hot fill below 100°C/pressurized hot fill above 100°C. Carton outer packaging: tray/wrap-around, total line output: approx. 27000 bottles/h. 1) Bottle washer Niko 36.25.750.100, year of manufacture: 1999, control: Siemens S7, spare parts package: available. 2) Bottle filling machine KHS Innofill DNR80, year of manufacture: 1999, control system: Siemens S7 with HMI renewed in 2015, filling stations: 80, filling temperature range: 10°C-104°C, products: Soft drinks/mineral water/fruit juices, spare parts package: available. 3) Screw capper (connected to the KHS) Alcoa 15 VK, year of manufacture: 1999, cap types: 28 mm aluminum and 43 mm plastic caps, sorting units: 2, replacement spindles: available, spare parts package: available. 4) TWO capper Italmeccania/Crown S4BLH, year of manufacture: approx. 1993, control: Siemens S7, capper type: belt capper, spare parts package: available. Including suction unit and sorting unit for TWO sheet metal closures. 5) Tunnel pasteurizer/recooler Göbel Tuchenhagen K1-35-175, year of construction: approx. 1993, control: contactor control, heating zones: 3, cooling zones: 2, fresh water zones: 1, belt width: 3500mm, length: approx. 16000mm. 6) Drying tunnel Europool TF03, year of construction: 2007, control system: Siemens S7, blower: 3. 7) Krones Starmatic high-speed labeling machine, year of manufacture: 1991, control system: Siemens S5, spare parts package: available. 8) Sleever Krones, year of manufacture: 2007, control system: Siemens S7, sleeve dimensions X/Y: 139mm/149mm, sleeve magazine: available, spare parts package: available. 9) Wrap-around packaging machine Kisters 320/50, year of manufacture: 1999, control: Rexroth Indramat, packaging capacity: 50 cycles/min, packaging type: tray/wrap-around, spare parts package: available. Including a Nordson Problue 14 gluing unit and automatic glue conveyor. 10) Shrink tunnel Krones Schrinkmat 5000, year of construction: 2007, heating zones: 10, spare parts package: available. Including suction unit. 11) Indspect fill level label inspection machine, inspection method: Inclined seat inspection/fill tube detection/lid detection/fill level inspection/vacuum inspection and label inspection. 12) KHS Lord 1BSN2 palletizing system, year of manufacture: 1999, control system: Siemens S7, pallet formats: Düsseldorfer pallet/Euro pallet/industrial pallet, pre-grouping station: available. 13) 2-sided label printer Logopak 920 II PF, year of manufacture: 2004, label dimensions X/Y: 148mm/210mm. 14) Various conveyor belts for product transport between the above-mentioned machines. Documentation available. On-site inspection is possible. Ibjdpfx Aswxfagod Dsd

Condition: new, Year of construction: 2025, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml Ibjdpfswpr Uxex Ad Dod 20 ml – 680 ml 50 ml – 1,500 ml Volumetric filling Under-surface filling possible Special "Anti-Drop" device Adjustable filling nozzle Pump and filling nozzle made of stainless steel AISI 316 L Automatic cap application Stepless torque adjustment of the screwing system Closing system for plastic caps Touch display control The products can come from the food, cosmetics, pet food, oils, chemicals and other industries (always subject to technical evaluation). The pouches are manually hung into a special rail feed system. Then the machine transports the empty pouches into the star. There, the pouches are volumetrically filled, the caps are automatically applied and then automatically closed. The torque is adjustable. The machine is compact and very versatile. Also available as a semi-automatic monoblock.

Condition: new, Year of construction: 2025, Dispensing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Bottle feed via a bottle sorting system or a stainless steel turntable Volumetric filling Underlevel filling possible Adjustable filling nozzles Pumps and filling nozzles made of stainless steel AISI 316 L Multi-format stars for different bottle diameters Automatic or manual cap application Stepless torque adjustment of the capping Ibodpfx Ajwpr Tbjd Ded Capping system for plastic caps and optionally for aluminum caps Bottle transport via slat chain conveyor (3,000 mm, depending on order) Display control Labelling is optionally possible Built in Rhineland-Palatinate / Germany

Condition: new, Year of construction: 2025, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml Iedpfx Ajwpr Ifod Dsbd 20 ml – 680 ml 50 ml – 1,500 ml Piston Filler Filling nozzles and pumps made of stainless steel AISI 316 Bottle infeed via chain conveyor Belt length 2,000 mm, housing made of stainless steel 1 or 2 filling positions possible Performance depends on the type of product, number of pumps, and container size, up to 1,600 bottles/hour with 2 filling positions Up to 900 bottles/hour with a single filling position Volumetric filling of products/bottles Automatic cap application Very compact dimensions (Basic Version 2,000 x 750 mm) Filling volume infinitely adjustable Very easy operation of the machine Connection to a labeling machine possible Pictures may show additional options

Year of construction: 2025, condition: new, Dosage ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml 1 filling station Plastic bottles or glass bottles Ijdpjwprv Nofx Ad Dobd “Anti-drop” device if possible Filling nozzles and pumps made of stainless steel AISI 316 Bottle feed via slat conveyor belt Adjustable guides Volumetric filling of products / bottles Caps must be placed by hand Filling amount infinitely adjustable Very easy machine operation

Condition: used, functionality: fully functional, It includes: * Manzini aseptic tank.    -Capacity: 1808 liters.    -Total High: 3.28 m.    -Total width: 1.3 m.     -Mark: Manzini Iodpfxjwnqi Es Ad Dobd     -Pressure: 3kg/cm2     -manufacturing number: 5151. *Gangway ladder. * Inches filling 2´ - Production will depend on the format and product to be filled.