Elitekno Bottling Solutions

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg Tjdpfoz H N Hhox Aknjc - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2016, Overview Complete fermentation and cellar plant from a craft brewery in Spain: 18 cylindro-conical fermenters with 64,000 L net fermentation capacity, 3 vertical brite tanks, the ABE glycol temperature control boxes and a York air-cooled chiller - 77,900 L of cellar capacity in total. The core of the plant was built by ABE (American Beer Equipment) in 2016 and is completed by fermenters from INOX GC and Impiantinox. All tanks are stainless steel with cooling jackets and are installed and in operation until dismantling. The plant is offered as a complete package; sub-lots or individual tanks are possible on request. Technical data - Fermenters: 18 units, 64,000 L net in total - Brite tanks: 3 units, 23.47 hl, 46.94 hl and 70.41 hl - Total cellar capacity: 77,900 L - Material: stainless steel, cylindro-conical fermenters on legs - Cooling: glycol jackets, individual digital temperature controller per tank - Chiller: York YLCA air-cooled chiller, cooling capacity 52.1 kW - Main build year: 2016 (ABE) Tedjz H Ad Tjpfx Aknoc Scope of Delivery - Isobaric fermenter | ABE | 3 x 2,000 L net (23.47 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 8 x 4,000 L net (46.94 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 2 x 7,000 L net (70.41 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 1 x 8,000 L net (93.88 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Isobaric fermenter | INOX GC | 2 x 1,000 L | cylindro-conical, CE plate | 2019 - Fermenter | Impiantinox | 2 x 1,000 L (max. usable 1,150 L) | cylindro-conical, CE plate | 2008 - Vertical brite tank | ABE | 3 units: 23.47 hl, 46.94 hl, 70.41 hl | pressure gauge, side manway | 2015 - Glycol temperature control boxes | ABE | one digital controller per tank | with parts catalogues and manuals | 2016 - Air-cooled chiller | York | YLCA | 52.1 kW cooling capacity Condition Used, installed and in operation until dismantling. Manuals and parts catalogues for the ABE tanks and control boxes are available. Viewing possible by appointment. Availability Available immediately. Sold as a complete package; sub-lots or individual units on request.

Condition: used, Year of construction: 2019, Overview Complete craft-beer bottling line for 0.33 L glass bottles, currently in operation. The heart of the line is an ABE GLASSPAK 66 automatic rotary isobaric monobloc that rinses, fills, crowns and post-rinses up to 4,000 bottles/h. A layer depalletizer feeds the filler; a linear labeller with lot coder, an accumulation table and a case sealer complete the end of line. Technical data - Product: beer, glass bottles - Capacity: up to 4,000 bottles/h at 0.33 L - Filling: isobaric (counter-pressure), 18 filling valves - Closure: 26 mm crown caps - Filler electrical supply: 380-415 V, 3-phase, 50 Hz - Year of manufacture (filler): 2019 Scope of Delivery Tsdpjz Hz S Aofx Aknjc - Bottle depalletizer | Cordero Maquinaria | layer depalletizer with overhead sweep frame, electric hoist and bottle infeed table, 400 V, 50 Hz - Isobaric filling monobloc | ABE | GLASSPAK 66 | inverting pre-rinser, vacuum and CO2 purge, 18 counter-pressure filling valves, 7-head crown capper, post-rinse and drying, touch panel, SEW 2.2 kW main drive, 4,000 bottles/h | 2019 - Pump cart | ABE | diaphragm pump for product feed | 2019 - Linear labeller | Basic Total | self-adhesive labels, bottle diameters 15-100 mm - Lot coder | Hitachi | UX-B160W | continuous ink-jet printer - Accumulation table | rotary, with infeed and accumulation controls - Case sealer | SOCO System | T-10 | with extendable roller conveyor Documentation Operator's manuals V1.2 and V1.3 and parts pictorial V2.2 for the GLASSPAK 66, labeller manual, original invoice. Condition Currently in operation. Availability Available now. Location: Spain.

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters - Construction: stainless steel Scope of Delivery - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Availability Tsdoz Hziujpfx Aknjc Immediately. Location: Spain.

Condition: used, Year of construction: 2016, Overview This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp Tjdpez Hzgyofx Aknjc - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX Tjdpfx Aoz Hwhtsknec YOM 2015 30 VELVES IN COMPLETE EXCELLENT CONDITION The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other.

Condition: used, Year of construction: 2007, Overview Robotic end-of-line palletizing system from a wine bottling plant, consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack the packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. The system is still installed in Belgium and can be viewed by appointment. Technical data - Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller - Gripper clearance: 1,200 x 240 mm - Pallet size handled by the destacker: 1,100 x 1,200 mm - Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm - Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm - Film: pre-stretched LLDPE, pre-stretch levels 160 %, 230 % and 260 %, ring rotation 18 rpm - Wrapper connection: 3 x 400 V, 50 Hz; compressed air 6 bar Tsdpoz Hvu Sofx Aknoc Scope of Delivery - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm, plus a spare gripper on a steel frame (1,340 x 610 x 640 mm) - Palletizing robot | ABB | FlexPalletizer | 4-axis, robot 2,600 x 1,200 x 3,680 mm, control unit 700 x 660 x 1,050 mm - Pallet destacker | steel roller conveyor, roller width 1,050 mm, 6,200 x 2,500 x 2,550 mm, with steel infeed frame 3,000 x 1,500 x 2,100 mm - Stretch wrapper | Strapex | SWR 30 | rotating ring, 2,830 x 1,810 x 3,520 mm - Chain conveyor | 3 chains, chain width 1,120 mm, 8,300 x 1,650 x 620 mm - Safety fencing | 10,000 x 10,600 x 2,310 mm Condition Used, still installed. Viewing possible by appointment. Availability Immediately available.

Condition: used, Year of construction: 2016, Overview This Thermindus GV INSIEME is a propane-fired steam generator with an output of 250 kg of steam per hour, built in 2016 in Italy. It was commissioned in 2017 and supplied process steam to a craft brewery: the brewhouse hot side, a flash pasteurizer and a semi-automatic keg washer. It comes with 20 m of stainless steel steam line, a propane supply with automatic changeover and a maintenance logbook covering 2017 to 2026. Technical data - Manufacturer: Thermindus (Italy) - Model: GV INSIEME - Year of manufacture: 2016 - Machine type: gas-fired steam generator - Steam output: 250 kg/h - Maximum operating pressure: 6 bar Tedpsz Hfxtofx Aknjc - Safety valve setting: 6 bar - Test pressure: 10.4 bar - Maximum temperature: 165 °C - Water content: 44.1 l - Fuel: propane (P35 cylinders) - Electrical supply: 385 V + N - Pressure equipment: PED 2014/68/EU, category III, CE marked - Operating hours: 1,600 h Equipment - Steam generator with multi-jet gas burner - Control cabinet with indicator lamps and emergency stop - Stainless steel steam line, 20 m (flow and return) - 2 propane cylinder connection hoses with automatic changeover valve Condition Used, in very good working condition; in production until August 2026. Rust traces on the parts that are not stainless steel, with no effect on operation. Maintenance logbook with weekly, quarterly and annual checks; the last annual service in January 2026 covered descaling, a combustion check and anti-corrosion treatment. The unit is already dismantled, stored and ready for truck loading. Inspection possible on request. Availability Immediately. Location: France.

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Todpfxsz Hc Ulo Aknoc Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Tjdpoz Hckmsfx Aknec Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 Tedpfjz Hcivsx Aknec - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2022, Overview Tedpfsz Hcb Eox Aknsc SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data - Manufacturer: KHS - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery Tsdpfxsz Hcaus Aknec - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals Tjdpfx Akoz Hb Sconsc - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts Tedpfx Aez Hb Nusknjc - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Tedpfxoz Hbzko Aknoc - Manufacturer: Kematec - Model: MBK 12 AS - Year of manufacture: 2006 - Machine type: capsule placing and shrinking machine - Output: 3,000 - 12,000 bottles/h - Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm - Head diameter: 33 mm - Heating stations: 12 - Capsule magazine: 1,800 capsules - Bottle height: 235 - 360 mm - Bottle diameter: 50 - 115 mm - Working height: 1,100 mm (+/- 50 mm) - Direction of travel: left to right - Power supply: 400 V, 50 Hz; main drive 0.75 kW - Compressed air: 6 - 7 bar, approx. 350 l/min - Overall dimensions (L x W x H): 3,700 x 2,500 x 2,580 mm - Weight: approx. 1,400 kg Equipment - Capsule magazine with multi-level storage shelves and capsule feed - Rotary capsule placing turret - Rotary shrinking turret with 12 heating stations - Bottle infeed and outfeed on slat chain conveyor with guide rails - Siemens touch panel (French, Dutch, German) with fault list, emergency stop and signal tower - Control cabinet with PLC - Stainless steel frame, enclosure with transparent guard doors - CE marked; operating manual with spare parts list available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing Tsdoz Hbxiopfx Aknoc - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2007, Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data - Manufacturer: Logopak - Model: LOGOMATIC 920 II PF - Year of manufacture: 2007 - Machine type: print-and-apply pallet labeller - Output: 4 labels/min - Print methods: direct thermal and thermal transfer - Label size: 148 x 210 mm (W x H), 3 mm gap - Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) - Mounting: vertical, print head at the bottom - Control: Logopak POWER LEAP II - Interfaces: W&T COM server, RS 232 - Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V - Compressed air: required (valve block and vacuum generator) - Overall dimensions (L x W x H): 1,530 x 1,000 x 2,910 mm Equipment - Labelling unit in a closed cabinet with two windowed doors - Label unwinder, printer and telescopic tamp applicator - Control box on the machine frame with display terminal, start/stop, emergency stop, auto/bypass key switch and main switch - Bypass function and three-colour signal tower - Floor frame with foot plates for anchoring beside the pallet conveyor - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Tsdpoz Hbp Iefx Aknjc Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Tjdpfx Ajz Hai Teknoc Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 Todpfxoz E U D No Aknoc - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve Todpfx Ajz E U Disknsc - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Tedpfez Et Uyox Aknoc Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2013, Overview This KOSME JETCLEAN G 16/960 1T UP is a rotary air rinser built in 2013. It cleans empty bottles and containers automatically before filling: the containers are turned upside down and blown out with filtered air through moving air nozzles, so loose particles and contamination are removed before the containers reach the filler. It suits bottlers who want a dry cleaning step for empty PET bottles ahead of filling. The containers are held in grippers on the rotating carousel and inverted for the air treatment. The machine is fully enclosed by transparent safety doors and is operated from a KOSME touch panel with production data and recipe management. It covers container formats from 400 g/ml to 2 kg at an output of up to 6,000 containers per hour; the format currently set up is a 2 L PET bottle, other formats via the available change parts. Technical data - Manufacturer: KOSME - Model: JETCLEAN G 16/960 1T UP - Year of manufacture: 2013 - Machine type: rotary rinser for empty containers, air blowing - Treatment medium: filtered air - Format range: 400 g/ml to 2 kg containers - Output: up to 6,000 containers per hour Tjdpfxsz Et Ute Aknjc - Current format: 2 L PET bottle - Dimensions: approx. 2.5 x 2.5 m Equipment - Rotary carousel with container grippers and inverting section - Moving air nozzles for blowing out the containers - Transparent safety doors - KOSME touch panel with production screen and recipe management - Electrical documentation and wiring diagram Condition Used. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2013, Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data - Manufacturer: KOSME - Model: DEPACK B B1F A/67-Rf - Year of manufacture: 2013 - Machine type: depalletizer for empty containers - Output: up to 13,000 containers per hour, depending on conveyor control and line integration - Container range: 100 - 500 ml - Pallet size: max. 1,300 x 1,000 mm - Pallet height: adjustable up to approx. 1,600 mm - Pallet infeed height: 630 mm, outfeed height: 680 mm - Power supply: 3 x 400 V + N, 50 Hz - Connected load: 27 kW, rated current 49 A - Short-circuit rating: 10 kA - Control: Siemens PLC, control cabinet IP54 - Dimensions (L x W): approx. 18.0 x 7.0 m - Weight: approx. 8 t Equipment - Pallet chain conveyors - Gantry depalletizing head - Tier sheet removal - Safety fencing with light curtains and access protection - Separate control cabinet with Siemens PLC - KOSME touch panel - Several formats set up - Operating manual and CE declaration of conformity Todpfx Aez Et Umoknsc Condition Used. The machine has been out of production since 2019 and is still connected. It can partly be moved in manual mode; automatic operation cannot be demonstrated at present. Inspection in manual mode is possible by arrangement. Availability Available immediately. Dismantling can be arranged at any time; if it has not been collected by week 43/44 of 2026, the machine will be dismantled and put into storage. Location: Germany.

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures Tedpfx Akjz Eqdxonoc - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium