RS service&solution

Condition: good (used), Year of construction: 2016, Posmill H 800 U, year of manufacture 2016, Heidenhain control, travel X/Y/Z 670/820/600 mm, 2-axis NC swivel rotary table, 96-position tool changer, HSK 63 spindle interface, spindle speed up to 18,000 rpm, 3D infrared probe Heidenhain, Blum laser tool measurement, rotary table Ø 800 mm. Kdedpsyvr Ifefx Ab Tei

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes Kdedpfx Absyvkuwj Tji - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010 Kdsdpjyu Ur Aefx Ab Tsi

Condition: used, Year of construction: 2010, operating hours: 20,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, HDC3000 with 6 axes • Travel paths X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm Kodpeyu Urvsfx Ab Tsdi • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 40 positions • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large work area diameter 2400 mm • Incl. cleaning gun • Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 2008, Data Total number of axes: 5 Longitudinal travel (X-axis): 800 mm Cross travel (Y-axis): 600 mm Vertical travel (Z-axis): 500 mm Positioning accuracy: 0.008 mm Max. workpiece weight on the table: 250 kg Swivel angle (A-axis): +/- 110° Rotation range (C-axis): 360° Clamping torque C-axis: 1.2 Nm Max. tool diameter: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool holder: Tool holder: SK 40 Infinitely variable From: 20 rpm Up to: 15,000 rpm Rapid traverse: 30 m/min Acceleration: 5 m/s² Max. feed force: 8,000 N Connection 50 Hz 3x 400 Volt Spindle power: 10 / 19 kW Total connected load: 31 / 43 kVA Machine weight approx.: 8,500 kg Tool changer: Number of tools: 30 Coolant system: 500 l Chip conveyor Tool breakage monitoring: BLUM Kdsdpfxoyuiv Ne Ab Tsi NC rotary table Electronic handwheel Coolant / mist extraction

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Kodpfx Absyubz De Tsdi Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: like new (used), Year of construction: 2002, 5-axis machining centre DECKEL MAHO DMC 60 hi-dyn from 2002 CNC HEIDENHAIN MILLPLUS 2 pallets 630 x 500 mm, maximum load 600 kg XYZ travels: 600 x 700 x 600 mm 2-axis head – 12,000 RPM – through-spindle coolant ATC for 60 tools, HSK 63 Workpiece and tool probes Chip conveyor Central filtration unit Kjdpjyuah Nofx Ab Tedi Machine like new Can be seen under power

Condition: good (used), Year of construction: 2014, Main spindle: Spindle speed: 5,000 rpm Spindle bore: 65 mm Kjdpfx Abeyt Dv Ij Todi Bar capacity: 60 mm Sub spindle: Spindle speed: 5,000 rpm Swing diameter: 42 mm Travel: Travel X1 / X2 / X3: 60 mm Travel X4: 130 mm Travel Z2: 80 mm Travel Z3: 80 mm Travel Z4: 340 mm Total weight: 3,500 kg Chip conveyor IEMCA bar feeder Radially driven tool holders Driven drilling and milling units 4-position basic tool holder, slide 3 Drilling and milling device Axially driven unit Control system: Fanuc i31

Condition: good (used), Year of construction: 1999, functionality: fully functional, Control: Heidenhain TNC 426/410M Spindle taper: SK 40 (or ISO 40) Kdjdpfxoyr Ez Ae Ab Tji Max. spindle speed: 7,000 rpm Table clamping surface: approx. 900 x 528 mm Travel paths (X/Y/Z): 630 mm / 500 mm / 500 mm Max. table load: 400 kg Tool changer: 16-position magazine Machine weight: approx. 4,800 kg Travel paths (X/Y/Z): 630 mm / 500 mm / 500 mm

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Kjdpfx Asyrirrjb Tsdi Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: new, Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun Kodpfx Aoyrdcrob Tjdi • Including warranty • Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 2020, operating hours: 916 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 47 kVA, workpiece weight (max.): 500 kg, total height: 3,039 mm, total length: 2,350 mm, total width: 2,962 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, spindle nose: BT40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Center Mazak Variaxis C-600 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2020 Number of running hours: 916 [h] Number of simultaneous axes: 5 Stroke X axis: 650 [mm] Stroke Y axis: 550 [mm] Stroke Z axis: 530 [mm] Feed rate on X, Y and Z axes: 42000 [mm/min] Min. distance spindle nose / table: 50 [mm] Max. distance spindle nose / table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Max. load on table: 500 [Kg] Stroke C axis : table revolution: 360 [°] B axis swivelling stroke: -30 [°] / +120 [°] Spindle type: BT40 Max. spindle speed: 12000 [rpm] Spindle power: 11 [kW] Tool changer magazin number of stations: 60 Max. tool length: 300 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Total power required: 46.7 [kVA] Supply voltage: 400 [V] Machine dimensions: 2350 x 2962 x 3039 [mm] Layout dimensions: 5010 x 2470 [mm] Weight: 10000 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW part probe type RMP600 x1 RENISHAW tool probe type PRIMO LTS x1 RENISHAW calibration sphere x1 electronic handwheel x1 chip conveyor x1 high-pressure pump 15 [bar] Kdsdpeyrcnmefx Ab Toi Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling machines, drill and tap machines, and CNC grinding machines.

Condition: good (used), Year of construction: 2012, Universal Machining Center Machine type: DMG DMU 60 evo Control: Heidenhain iTNC 530 Year of manufacture: 2012 Kdjdpfeyq Hx Hox Ab Tji TECHNICAL DATA: Travel paths: Number of controlled axes: 5 X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis: -5° / +110° C-axis: 360° Rapid traverse (X/Y/Z): 10 m/min Max. spindle speed: 24,000 rpm Tool holder: HSK 63 Tool changer Number of tool stations: 60 NC rotary tilt table Table size: 600 x 500 mm Max. workpiece weight: 400 kg Equipment features: Chip conveyor Tool breakage monitoring: Blum Laser Electronic handwheel Roto Clear Internal coolant supply (IKZ): 40 bar - 23 L/min Coolant tank: 600 l Paper band filter Oil mist extraction Measuring probe Operating mode: 4 Air through spindle center Chip rinsing gun 3D quickSet

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 / 74 Nm tool taper HSK A 63 table surface area 630 x 500 mm max. table load 200 kg Swivel range -110 / +5 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. tool taper HSK A 63 max. tool weight 6 kg Kjdsypv Tdspfx Ab Tsdi max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse 24 m/min Feed force 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 3,5 x 3,5 x 2,8 m CNC - Milling Machine Universal DMG DECKEL MAHO - DMU 50 New Design - 5 Axis (3+2) - swivable rotary table - only 1.946 Spindle hours - Chip tray AND chip conveyor included - PREPARATION Probe

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Kdedpsym Aucsfx Ab Toi Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Kdedoymg Iyspfx Ab Tsi

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! Kdsdpfsymbz Iox Ab Tei TECHNICAL DETAILS Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: IKZ 5 axes with chuck

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Kedpoymbb Ijfx Ab Tsdi Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: excellent (used), Year of construction: 2017, CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of manufacture: 2017 Travel distances: X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Kdedpfoyli Ersx Ab Tsi Manual swiveling of milling head: -5° / +95° Rotary table: Ø 400 mm Centering bore: Ø102 H7 A-axis (swivel): +/- 30 s C-axis rotary table: +/- 10 s Swivel range A-axis: -120/-95° Rotation range C-axis: 360° rotation Spindle interface: SK 40 DIN69871 Tool magazine: 60 slots Spindle speed: 1 – 12,000 rpm Accessories: Coolant system ICS with high-pressure pump Electronic handwheel Chip conveyor 3D measuring probe

Condition: excellent (used), Year of construction: 2007, CNC Machining Center Hedelius RS60S-600 Control: Heidenhain iTNC 530 Year of manufacture: 2007 Travel paths: X-axis: 600 mm Y-axis: 620 mm Kjdpfx Asyk Tawjb Tsdi Z-axis: 520 mm Clamping surface - rotary/tilt table: Ø600 x 480 mm Tilting range: +10° / -90° Spindle taper: SK 40 Tool magazine: 30 stations Weiss motor spindle: 50 - 12,000 rpm Accessories: Chip conveyor Sieve filter system 500 L Coolant through spindle (IKZ)

Condition: excellent (used), Year of construction: 2019, 5-Axis Machining Center POS POSMILL H 800 U Control: Heidenhain iTNC 530 Year of manufacture: 2019 ATTENTION: Machine has ONLY 500 spindle hours!!! Traverses: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Table load capacity: 1,200 kg Spindle interface: HSK-63A Tool magazine: 96 positions Spindle speed: 18,000 rpm Equipment Rotary-swivel table Rotating viewing window Glass scales on all axes Handheld control unit Heidenhain touch probe Laser tool breakage detection Rotary union in the table Air connection in the table incl. M-function Coolant system Internal cooling Chip conveyor Automatic roof Extraction unit Documentation General data Repeat accuracy/positioning accuracy on delivery: 0.004 mm/0.008 mm (VDI/DGQ 3441) Including tool holders with tools mounted in the tool changer (No suggestions), oil mist extraction Kdsdpjyk Az Dofx Ab Tsi IKZ Chip conveyor Rated power 90 kVA Full load current 125 A Max. current load 200 A 400 V 50 Hz

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, HDC3000 with 6 axes Kdsdpeykvriefx Ab Tsi • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2001, operating hours: 54,057 h, Manufacturer: HERMLE | Model: U 1000 T | Year of manufacture: 2001 | Operating hours: approx. 54,057 | Universal milling and drilling machine | CNC control (TNC 426) | Automated tool clamping | Precision motion guidance | Dimensions: approx. 3,600 mm x 2,450 mm x 2,800 mm (W x H x L) | The stated dimensions are approximate values. All other information provided without guarantee. | Grey | Steel Ksdpfxjyic R To Ab Tjdi

Condition: good (used), Year of construction: 1999, Manufacturer: HERMLE | Model: U 630 T | Year of manufacture: 1999 | Operating hours: approx. 54,135 | Control: Heidenhain TNC 426/410M; Spindle mount: SK 40 (or ISO 40); Max. spindle speed: 7,000 rpm; Table clamping surface: approx. 900 x 528 mm; Max. table load: 400 kg; Tool changer: 16-position magazine; Machine weight: approx. 4,800 kg; with accessories; | Dimensions: approx. 3000 mm x 2200 mm x 2400 mm (W x H x D) | The specified dimensions are approximate. All other information without guarantee.| Grey | Steel | Working travel (X/Y/Z): 630 mm / 500 mm / 500 mm Kedpfx Ajyic Rysb Todi

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 Kdedpoyhnxvefx Ab Tei MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit