Milling machine

UNITECH FSS 400

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Gbodpjxpugnjfx Ahnen Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Gbsdpfjyt Iaqjx Ahnjn Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground Gbedpfx Asy Hlxfehnen - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 58 mm, turning diameter: 360 mm, turning diameter over top slide: 200 mm, center height: 180 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Nice lathe in good working condition. Implemented with Newall digital readout on both axes. Gedpfx Aoy S Slpohnjbn Provided with : - Multifix quick-change holder with 3 tool holders. - 200 mm Bison 3-jaw chuck - Chuck protection - etc. Automatic feeding in longitudinal and transverse directions. Rapid movement currently not working, probably disabled by the previous owner. Manufacturer: ZMM Model: CU360M Year: 2002 Condition: Used Mains voltage: 400V - 3 phase Center distance: 1000 mm Turning diameter over bed: Ø 360 mm Turning diameter in removable bed: Ø 500 mm Turning diameter over slide: Ø 200 mm Spindle thru: Ø 58 mm Spindle speed: 18 steps, 35 - 2000 rpm