Intra Metaal

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Gedexwp Nyepfx Abdjkd Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Gkodpfxoxwk Tgs Abdod Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Condition: used, Year of construction: 2001, operating hours: 8,269 h, functionality: unexamined, For details, see pictures Gjdpfx Asxvx U Nobdjkd

Condition: used, Year of construction: 2000, operating hours: 18,686 h, functionality: fully functional, For details, see the description Godsxvx Tlspfx Abdokd

Condition: good (used), Year of construction: 2018, functionality: fully functional, You will find all details in the exposé. Gedpjxvx R Dsfx Abdokd

Condition: good (used), Year of construction: 1990, functionality: fully functional, Bruderer BSTA 200 press (1990) Gedpoxvx Ivofx Abdjkd

Condition: good (used), Year of construction: 1993, functionality: fully functional, FOR SALE Bruderer BSTA 25H press (1993) Godpfoxvx Hrex Abdekd

Condition: good (used), FOR SALE BRUDERER BSTA 50 PRESS Automatic precision press by Bruderer Model: BSTA 50. Max. press force: 500 kN (50 t). Speed range: 100 – 1,200 spm. Gkedoxvri Tepfx Abdsd Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 mm. Equipped with Bruderer BBV 202/120 feed unit. Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feed length: 120 mm.

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Gkjdpfx Absxvpdhjdod Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control Gksdpfxexu T Eyo Abdod

Condition: ready for operation (used), Year of construction: 1977, Available immediately, ex location: Gkedpfxexud S Ro Abdsd Double-column automatic press Haulick und Ross Type RVD 100 Year of manufacture: 1977 Pressing force: 100 tons Table: 880 x 800 mm Table opening: 470 x 140 mm Column clearance: 900 mm Ram stroke: 45 mm Ram adjustment: 0 – 80 mm Stroke rate: 50 – 300 strokes/min Installation height: 340 mm Motor power: 15 kW Feed unit Weight: 9 tons Price: EUR 2,750 plus VAT, ex location

Condition: good (used), Year of construction: 2001, Kaiser Press V 160 WR Press force 1,600 kN Stroke adjustment 20 - 105 mm Ram adjustment 90 mm Strokes per minute 20 - 120 spm Press table 1,400 x 1,000 mm Drive power 22 kW Machine weight 24,000 kg Godpsxt Ex Aefx Abdekd Lorenz strip feeding line Strip width up to 300 mm Load capacity 3,000 kg

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, Manufacturer: Otto Kaiser Model: PV 40 F Precision Punching Press Year of manufacture: 1969 (electrical/mechanical overhaul 1989) Machine table: 430 mm x 490 mm Cut-out: 180 mm x 150 mm Ram: 375 mm x 300 mm Clamping shank: according to DIN Ø40 mm Stroke adjustment: 8 mm–60 mm Ram adjustment: 60 mm Strokes: 80–400 strokes/min Feed: mechanical feed controlled via shaft Godpfx Ajxr Tvtobdjkd Current press inspection certificate available.

Condition: used, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min Gksdpfx Aexpx Ddsbded .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: used, IMV Punching Press Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Gkjdpfoxnxlxox Abdsd Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Condition: used, ROVETTA Transfer Press Type: S4-15000-5500x2500 Gkodpfxjxnxlfs Abdod Press force: 1,500 t Strokes: 8–24 spm Stroke length: 763 mm Slide adjustment: 400 mm Shut height: 1,200 mm Table area: 5,500 x 2,500 mm Slide area: 5,500 x 2,500 mm Opening between uprights, lateral: 3,400 x 1,900 mm

Condition: ready for operation (used), Year of construction: 1991, pressure 25 t stroke 7 - 62 mm Gksdpfxexiy Abo Abdjd no. of strokes 120-600 Hub/min total power requirement 4 kW weight of the machine ca. 2,5 t

Condition: used, Year of construction: 1992, pressure 10 t stroke 8-40 mm no. of strokes 120-600 Hub/min ram - range of adjustment 40 mm table surface area 380x240 mm ram surface 220x140 mm hole in the table 220x110 mm table height 910 mm tool hole in ram Ø 30 mm throat 135 mm weight of the machine ca. 1,2 t dimensions of the machine ca. BxTxH 1000x1500x2000 mm Godpfjxh Szajx Abdokd

Condition: used, Year of construction: 2000, pressure 130 t Gkedpexh Sypefx Abdsd no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm

Condition: new, Year of construction: 2025, pressure 75 t stroke 8-80 mm no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm Gedpfx Aboxh Swujdokd hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Gkjdpfxoxg Rvao Abdjd Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: used, Year of construction: 2005, functionality: fully functional, OMERA-ROSS 500-R2-M2P8 Eccentric Press Description: Capacity (Tons): 500 Table Size: 2300 x 1400 mm Ram Stroke: 300 mm Minimum Number of Strokes: 12-44 SPM Subtype DM Cdc: DM2B CE Marked: Yes Eccentric Drive Linkage System: Knuckle-joint flywheel with screw, eccentric type Ram Width: 2300 x 1300 mm Ram Mounting: 200 mm Number of Pressure Points: 2 Number of Guides: 8 Ram Adjustment System: Guided wedge ball seat Daylight (Slide Opening): 1150 mm Side Window (Between Uprights): 1020 mm Weight: 66 tons (66,000 kg) Foundation Depth: 1000 mm Motor Power: 76 kW Electrical Panel Connections - Operation - Condition - To be overhauled Front/Rear Photocells: Yes Front/Rear Safety Guards: Yes Gsdsxfk E Eepfx Abdjkd Mechanical/Hydraulic Overload Protection: Yes Accessories / Other data: Compact Feed Line Presses 600x4 Motor Power: 76 kW Table Length: 2300 mm Table Width: 1400 mm Strokes per minute: up to 44 spm Distance between uprights: 1020 mm Total Weight: 66,000 kg

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Gedpfx Asxdxbxsbdekd Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 2800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 2700 x 1200 mm hole in the table 2450 x 450 mm ram surface 2700 x 800 mm Gkjdpexcp Itjfx Abdjd Weight 80,0 t dimensions of the machine (WxDxH) 5,1 x 2,65 x 5,25 m

Condition: new, Year of construction: 2025, pressure 315 t distance between columns 3800 mm stroke fix 35 mm no. of strokes 100 - 250 Hub/min dayligth (stroke and adjustment up) 560 mm column travel -side 600 mm table surface area 3700 x 1200 mm hole in the table 3400 x 450 mm Gjdpfx Asxcp Imjbdskd ram surface 3700 x 800 mm Weight 110,0 t dimensions of the machine (WxDxH) 6,1 x 2,65 x 5,6 m