Reupies Srl

Condition: used, Year of construction: 2013, Lathe, used Manufacturer: WEILER Model: DA 210 AC x 1500 Year of manufacture: 2013 Kfsdpfx Ajx I S I Njgzoa Swing diameter over bed: 435 mm Swing diameter over support: 245 mm Center distance: 1,500 mm Speed range: 20 - 2,000 rpm (2 ranges, infinitely variable) Spindle bore: 52 mm Equipment: - Infinitely variable speed control - HEIDENHAIN 3-axis digital readout - Multifix toolpost + 10 tool holders - 3-jaw chuck RÖHM DURO - 4-jaw chuck RÖHM - Collet chuck Fahrion + approx. 33 collets - Fixed and travelling steady rests - Various live/dead centers + drill chuck (see photos) - Coolant system - Documentation The machine was used in-house by a manufacturer of automation technology for their own products. The machine has been tested for basic functions; everything worked except for the spindle brake.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with NEW 3-axis Digital Readout K&C and Accessory Cabinet in Excellent Condition!!! Technical Data: >> Machine No. 252409 >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm Ksdpfx Agsx I Nkuozefa >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock: Morse Taper MK3 >> Infinitely Variable Spindle Speeds: 55–3000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> K&C 3-axis digital readout, new, with 12 month manufacturer’s warranty and operating manual Functions: metric/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> Accessory cabinet including: – Multiple 3-jaw chucks with several sets of jaws – Multifix size A with toolholders – Internal and external collets with quick-clamping device – Change gears – 4-jaw chuck – Faceplate – Fixed and travelling steadies – Coolant system – Centers – Operating manual – Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university setting and has seen very little use. Equipped with a new 3-axis digital readout from K&C and a wide range of accessories. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3108833, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Kedpfx Agex Ig Auszsfa Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Hydrafeed MSV 65 magazine barfeed Parts catcher Hydraulic tailstock Swarf conveyor Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Ksdpex Ich Tefx Agzofa Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Kfjdpfxsx Ichye Agzoa Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Tool holder Coolant system Price: Euro 2,500.— plus VAT, ex-site.

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: Kfjdpsx H Szyofx Agzoa For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: excellent (used), Year of construction: 2007, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rp9023 Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Kjdpfjx H Anwsx Agzefa Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter over bed slide: 390 mm, 3-jaw chuck digital read-out Multifix tool holder device tail stock steady rest Technische Daten / technical details: Spitzenweite / center to center 765 mm Kjdpex Evzbsfx Agzjfa Umlaufdurchmesser über Bett / rotary diameter over bed 390 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 240 mm Umlaufdurchmesser in der Kröpfung/ rotary diameter in the gap 580 mm Spindelbohrung / spindle hole 54 mm Drehzahlbereich 16-stufig / spindle speed 16-steps 25-2000 UpM /rpm Antriebsleistung / drive capacity 5,5 kW Gewicht der Maschine ca. / weight ca. 1300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm Kedpfsx D Uf Tsx Agzsfa 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Kfsdjx Dm Sxepfx Agzoa Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. The machine is low-priced and only suitable for simple tasks.

Condition: good (used), Year of construction: 2013, Distance between Centres 1250mm, Swing 470mm, swing over cross-slide 257mm, Spindle Speed 2500rpm, 80mm spindle bore, Kfodpfx Asx Dk Svjgzea Prototrak SLX control, Quick change toolpost, manual 3 jaw chuck, Coolant, interlocked guards

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Control: Siemens 828 D General Speed: 3,000 rpm Power: 9 kW Torque: 140 Nm Chuck diameter: 210 mm (max. 260 mm) Spindle bore: 65 mm Spindle nose: A2-6'' Working area Distance between centers: 1,000 mm Center height: 215 mm Swing over bed: 430 mm Ksdpfx Ajx Ahdtegzefa Swing over slide: 200 mm Travel Z-axis: 1,065 mm Travel X-axis: 220 mm Tooling system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: dragged Centre point: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 5 bar Jaw set: 1 set of hardened jaws

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Kodpfx Aoxz Edzegzjfa

Condition: good (used), Year of construction: 1974, centre distance 1500 mm 550 Kedpfexzu Ddex Agzofa serial number 20-08 documentation ja digital ja hollow 88 mm multifix ja Auffang Wannen

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M Kedpfx Agexzuu Aozjfa 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 750 mm € 35 360,00

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW Kjdpfx Agexziuwszjfa The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: good (used), L+Z lathe ERNAULT-SOMUA Cholet 435 Kfjdpsxy Uavofx Agzsa

Condition: good (used), Year of construction: 1998, functionality: fully functional, TOS Galanta SUIL 40A – Lead and feed screw lathe For sale is a well-maintained, mechanically overhauled (2009) lead and feed screw lathe, TOS Galanta SUIL 40A, year of manufacture 1998. Technical Data Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1,620 kg Main drive: 5.5 kW Max. spindle speed: 3,150 rpm Spindle bore: 50.2 mm Distance between centers: 1,000 mm Center height: 200 mm Swing over bed: 400 mm Condition: ready for operation (used) Included accessories Three-jaw chuck Kedexy R Hxjpfx Agzjfa Tailstock Steady rest Coolant system Change gear set Operating manual (German) The machine is fully functional. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Quill diameter 50 mm Inner cone MT3 Kfjdpexyziksfx Agzja Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: excellent (used), Year of construction: 2015, functionality: unexamined, turning diameter over bed slide: 560 mm, center height: 280 mm, center width: 1,420 mm, rotational speed (max.): 1,600 rpm, overall weight: 2,300 kg, For sale is an Optimum TH5615 lead and feed screw lathe from 2015 (7.5 kW). Designed for precision turning of single parts, small batches, or repair components. With a center height of 280 mm, a distance between centers of 1,420 mm, a maximum spindle speed of 1,600 rpm, robust construction, and a powerful 7.5 kW motor, it is ideal for professional workshops, training facilities, or production operations with high quality standards. The machine is in condition appropriate for its age, has not been inspected, and is offered as-is. Our Service Commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machines and other brands. We place great value on personal service and are happy to support you at any time even after your purchase. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice. Kfodpfxsxyx E No Agzja

Condition: good (used), WEILER DA 260x1000 Gap Bed & Leadscrew Lathe - 3-axis digital readout (new) - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 - 1500 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / inch / diametral etc. - Tailstock: MT 4 - Motor power: 7.5 kW - Chuck nut (new) - Multifix toolpost base with insert - 3-jaw chuck: 350 mm - 2x emergency stop - Electric chuck guard (new) - Chip guard (rear) - Coolant system - Drill chuck / live centre - Documentation Kfodsxyugcopfx Agzea Dimensions (LxWxH): 2.7 x 1.5 x 1.7 meters / weight: 1700 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, spindle bore: 68 mm, turning diameter: 520 mm, Pinacho lathe model S90 260 with 1600 mm between centers, swing over bed 520 mm, swing over gap 770 mm, swing over cross-slide 325 mm, spindle bore 68 mm, 7.5 HP motor. Quick-change toolpost, with fixed steady rest, overall in very good condition. Kfjdpfx Asxytppogzoa

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Kfjdpfx Asxxyy Segzea Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 3251, turning diameter over cross slide: 230 mm, spindle bore: 45 mm, turning diameter: 440 mm, center height: 220 mm, turning length: 1,200 mm, total length: 2,600 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 26 rpm, metric thread diameter (max.): 112 mm, metric thread steps: 40, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, This centre lathe is equipped with digital readout on two axes, a central lubrication system for the carriage, a complete cooling system, chuck guard, and meets the minimum safety requirements. Ksdoxxx Arspfx Agzefa

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter over bed slide: 400 mm, turning length: 1,270 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, Colchester Triumph VS2500 Gap Bed Lathe Immaculate Condition 50" Between Centres Spindle Speeds 75-2500 rpm Swing over bed 400mm Swing over cross slide 246mm Spindle Bore 54mm 2 Axis DRO Newall NMS3000 Interlocked chuck Guard Kedpfx Agsxxiyzozsfa Metric Machine LED worklight 6 x Quick Change Tool Holders 3 Jaw Chuck 10" 4 Jaw Chuck 12" Face plate 14" Fixed Steady Coolant Pump & System 3phase 400V Price includes free delivery with crane offload within 100 miles of Sheffield Any interest please contact me for inspection