Affeldt Fördertechnik GmbH

Year of construction: 1995, condition: good (used), Reliable Dyno Industrier tray sealing machine, manufactured in Norway. Suitable for meat, fish, poultry, ready meals, cheese, and other food products requiring vacuum or Modified Atmosphere Packaging (MAP). Specifications: Model: DYNO 320VG / 321VG Vacuum + MAP (gas flush) capability Fully operational and currently in production Semi-automatic operation 4-cavity tray mold installed Film roll system included Original operating manual included Pilz control panel Well maintained and ready for immediate use Ideal for: Meat processors Seafood companies Dodpfszkwd Sjx Aidsuw Delicatessen producers Ready-meal manufacturers Small and medium-sized food production facilities The machine can be inspected while running and demonstrated to serious buyers. Several molds are available.

Condition: good (used), functionality: fully functional, Band-A-matic F117S 220 V, single phase Fully operational Dujdpszkwdfsfx Aidow Made in Japan Suitable for packaging meat, poultry, fish, cheese, and other food products Available for inspection and testing

Condition: refurbished (used), Year of construction: 2020, operating hours: 455 h, functionality: fully functional, machine/vehicle number: 1222275, warranty duration: 6 months, total height: 2,085 mm, total width: 1,225 mm, total length: 6,109 mm, type of input current: three-phase, overall weight: 1,570 kg, film width: 700 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 870 mm, year of last overhaul: 2026, input current: 14 A, Equipment: documentation/manual, safety light barrier, The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. Duedpozkry Usfx Aidsw ULMA FM 30 The ULMA FM 300 automatic flow pack machine was specifically designed to package fresh products in multilayer films under a modified atmosphere (MAP). This machine produces hermetically sealed “pillow-pack” flow packs in a pillow format. Technical specifications Model: FM 300 Condition: Overhauled 2026 (fully functional) Year of manufacture: 2020 Performance: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Flow pack Machine equipment Infeed conveyor length: Free infeed section 2135 mm Equipment features ✅ Wash-down infeed conveyor in hygienic design ✅ Motorized film roll holder (max. film width 700 mm) ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer/labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700 mm) ✅ Cross-sealing bar made of stainless steel with double tooth for mono films ✅ Squeeze sponge for controlling the pack volume ✅ No product/no bag function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dan Sensor MAP Check 3 O2 & CO2 gas analyzer Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,109 × 1,225 × 2,085 mm Shipping weight: 1570 kg (including transport packaging)

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 5001471, ROTARY TABLE, CONCAVE, Ø 1200 mm, FOR COLLECTING PRODUCTS ON THE CONVEYOR BELT Dedpszkqx Nofx Aidjuw ✅ FRAME CONSTRUCTION MADE OF STAINLESS STEEL ✅ HEIGHT ADJUSTABLE FROM 810 - 1010 mm

Condition: new, Year of construction: 2024, operating hours: 46 h, functionality: fully functional, machine/vehicle number: 143810, warranty duration: 12 months, total height: 1,715 mm, total width: 1,250 mm, total length: 5,405 mm, type of input current: three-phase, overall weight: 989 kg, film width: 700 mm, compressed air connection: 6 bar, working height: 870 mm, input current: 8 A, conveyor belt length: 2,500 mm, conveyor belt width: 300 mm, Equipment: documentation/manual, Ulma FR 200 The electronic, automatic flow-pack machine, type ULMA FR 200, has been specifically designed to package a wide variety of different products in flat pouches (flow-pack) or pillow packs. Technical Specifications Model: FR 200 Condition: New (fully functional) Year of manufacture: 2024 Performance: Up to 100 packages/minute (depending on film and product characteristics). Type of packaging: Flow-pack Machine Equipment Length of infeed conveyor: Free infeed section 2500 mm Equipment Features Dedpfxszkqvbs Aidjuw ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing, except for tall products (max. 160mm), sealing bar width 300mm ✅ Bracket system for heavy trays through cross sealing ✅ No product / no bag function Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 5,405 × 1,225 × 1,715 mm Shipping weight: 989 kg (including transport packaging)

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 7119265, type of input current: three-phase, total length: 2,225 mm, total height: 1,693 mm, total width: 1,177 mm, overall weight: 1,087 kg, compressed air connection: 6 bar, warranty duration: 12 months, input current: 22 A, film width: 345 mm, Ulma TSB 300 Fully automatic machine for sealing trays made of various materials, e.g., polypropylene, polyethylene, PVC, polystyrene, PET, CPET, aluminum foil, etc. The packaging material used must be compatible with each other. The packaging can be done with or without modified atmosphere packaging (MAP), as desired. Technical specifications Model: TSB 300 Condition: New (fully functional) Year of manufacture: 2025 Performance: Up to 18 packages/minute (depending on film and product characteristics) with protective gas. Packaging type: Tray sealer Machine equipment Length of infeed conveyor: Free infeed area 680 mm Tray size 190x144mm Equipment features ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Cut Inside tool for tray size 190 x 144mm ❌ Double film roll holder ✅ Suitable for packaging with protective gas exceeding 21% O2 ✅ Busch 100 m3/h vacuum pump integrated ✅ Spare parts package for machine and format ✅ Cleaning and lubrication system for the chains ✅ Tool change trolley included Documentation & Operation Language (documentation & HMI): German (other languages on request) Dimensions & Weight External dimensions (L × W × H): 2,225 × 1,177 × 1,693 mm Shipping weight: 1,087 kg (including transport packaging) Dedpfxozkqmgo Aidouw

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 1223785, warranty duration: 12 months, total height: 1,960 mm, total width: 1,395 mm, total length: 6,165 mm, type of input current: three-phase, overall weight: 1,300 kg, film width: 1,000 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 780 mm, input current: 17 A, conveyor belt length: 2,855 mm, conveyor belt width: 300 mm, Equipment: documentation/manual, safety light barrier, Ulma Sienna LS BI The Ulma Sienna LS bag-in-film machine is designed for packaging loose, difficult-to-handle, delicate, and wet products. This machine is suitable for fruits and vegetables, baked goods, and non-food products. The output, depending on the product, is up to 80 units per minute. Technical Specifications – SIENNA LS BI Model: SIENNA LS BI Condition: New (fully functional) Year of manufacture: 2025 Performance: Up to 80 packs/minute (depending on film and product characteristics) Packaging type: Flow-pack Machine equipment Length of infeed conveyor: Free infeed section 2,855 mm Cross-sealing system: Box Motion Width of cross-sealing: 400 mm Position of sealing rollers: Top Maximum film width: 1,000 mm Equipment features ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Product length sensor ❌ Double film roll holder ✅ Suitable for packaging with trays ✅ Suitable for packaging without trays Documentation & Operation Dujdpfx Aiezkhnhsdow Language (documentation & HMI): German (other languages upon request) Dimensions & Weight External dimensions (L × W × H): 6,165 × 1,660 × 1,960 mm Shipping weight: 1,300 kg (including shipping packaging)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Dusdezkgbyjpfx Aidsw Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating Dodpfx Aiszka Ruedouw The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Year of construction: 2014, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: FP9646, We offer this very good ILPRA basic MEC VG tray sealer, Year of construction 2014. Duodpfezi E Trjx Aidsw Machine has been checked over in the workshop and tested, Also been tested with film and trays to confirm its fully operational. if you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), The system is designed for the automatic packaging of parcels into shipping cartons. The packages placed on the conveyor belt are inserted into the carton, and the carton is then automatically sealed with hot glue. This allows the packaging process to be automated efficiently and saves time. Of particular note is the almost new hot glue unit (blue component on the machine). This is filled with glue pellets and ensures a clean, secure, and durable carton seal. Dsdeziylispfx Aidouw

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: FPGG90, We offer this very good ILPRA Basic Mec tray sealer, year of construction 2015. Machine has been checked over in the workshop and tested, Also been tested with film and tray's, to confirm its fully operational. Dsdpfx Aiozivxrodjuw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI – Complete line for packaging bulk products For sale: a complete, fully functional line for packaging bulk products, such as: - pellets, - anthracite, - granulated fertilizers, - aggregates, - and other bulk materials. The machine allows for packaging products into polyethylene bags weighing from 1 to 20 kg. It handles: - flat bags, - bags with a gusset, - bags with a top handle. The line consists of: Dodpfxszh N N Ue Aidsuw - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 receiving conveyor, - frame with an operating platform, - filling hopper with a bucket conveyor, - dust extraction system (2 filters), - screw compressor, - compressed air tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – No. 3016 Weighing dispenser RW-04 – No. 2093 Receiving conveyor RC-50 – No. 3018

Year of construction: 2007, condition: excellent (used), 1 x Multivac T400 Traysealer Year: 2007 With gas flush facility Dodpezhxgcefx Aidouw Located in Melksham, Wiltshire

Condition: ready for operation (used), functionality: fully functional, The THIMON SWING PRO 5-sided strapping machine is a state-of-the-art industrial solution designed to provide complete pallet strapping using a single consumable. Thanks to its patented triangular arm technology combined with a motorized rotary table, it performs the packaging of all five sides of the pallet in a single cycle, while guaranteeing excellent load stability. This technology improves the protection of goods against dust, moisture, and stresses related to transport. Designed for the food processing, logistics, pharmaceutical, paper, or manufacturing industries, the WRA-PAL SWING PRO combines a high throughput with reduced stretch film consumption. Its motorized pre-stretch module and 1,000 mm film width allow for a reduction in consumable usage of 20 to 40% while improving load retention. Furthermore, its capacity to accommodate reels up to 100 kg offers significantly greater autonomy than conventional systems and limits production downtime. The machine easily adapts to different pallet sizes thanks to its numerous adjustments. Its cutting and heat-sealing device eliminates film tails at the end of the cycle, while its patented pleated film system reinforces the cohesion between the pallet and the load. In addition, the use of a single film for all five sides guarantees inviolable product protection and improves their preservation during storage and transport. At Europ'Équipement, this strapping machine undergoes a complete overhaul before being sold. Each component is inspected, serviced, and tested to offer manufacturers a reliable, high-performance, and immediately operational solution, while significantly reducing the investment compared to new equipment. Technical specifications: Packaging of all 5 sides with a single film reel Motorized rotary table Patented triangular arm with mobile linkage Motorized pre-stretch module Duedpfezhwfkox Aidow Film width: 1,000 mm Adjustable pre-stretch: 0 to 350% Reel capacity up to 100 kg Automatic cutting and heat-sealing device Pleated film reinforcing load cohesion Anti-fall system for the stretching carriage Touchscreen operator interface Frequency inverters Programmable industrial controller Adaptation to different pallet sizes Simplified maintenance thanks to optimized kinematics

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, Kremers Rotating Turntable/Table for Packaging Rotating table for collecting finished products Turntable speed infinitely adjustable Robust design in stainless steel Dujdpfozhra Aox Aidew Rotating tables, turntables, and rotating baskets – robust accessories for your filling and packaging line Only available from us, DGUV V3 certified Feet with adjustable height Dimensions approx.: 1200 x 1200 x 850 mm, W x D x H Connection 380 V Used machine, like new We have many more machines in stock!

Year of construction: 2020, condition: excellent (used), Manufacturer : Smipack Model: BP800AR 280ST Year : 2020 Dodpfx Aszhmbbsidsuw Type : Automatic monobloc shrinkwrapper

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: AC, Kremers Food High-Conveyor Belt Dsdpfxozhh U Ao Aidsuw Belt width 260 mm Conveyor belt transports goods from approximately 300 mm to 1000 mm in height Belt speed is continuously adjustable Stainless steel design Only available from us, DGUV V3 certified Feet are height-adjustable Dimensions approximately: 1500 x 650 x 1050 mm (W x D x H) Connection 230 V Used equipment, in like-new condition & SAB tested

Year of construction: 2002, condition: used, Packing machine for packing glass bottles into beverage crates. Two crates are filled with bottles per cycle. Packing heads are available for all formats handled. Additional title: Crate packer with 2 packing heads Capacity filling line appr.: 12000 bo/h referring to 0.5 litre bottles Formats: Beverage crates, each holding 20 bottles (0.5 l and 0.33 l) Running direction: right -> left Operation / Control: Simatic S7-300 Position: in a footed stainless steel housing Base construction: T-formation between bottle and crate conveyors Duedszg I Rbopfx Aidew Features: 2 packing heads, housing with safety doors

Year of construction: 2015, condition: good (used), Smurfit Kappa Case Packing Machine Previously being used for glass bottles, in various sizes and configurations. Dedpfxszg Hd Hj Aidsuw *Videos available on request*

Condition: excellent (used), Year of construction: 2016, 1 x Loma IQ3 Metal Detector Year: 2016 450mm x 225mm aperture Dsdpfx Aezg D Sbjidjuw 3 phase

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, 1 x Loma Systems bulk metal detector with alarm and stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Manufacturer - Loma Systems Model - IQ3. Serial number - MD308-17641D. Aperture dimensions - 650mm wide x 350mm high (315mm clearance). Belt type - modular plastic. Belt dimensions - 2000mm long x 500mm wide. Dedpfx Aszgwt Ssidsuw Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: refurbished (used), functionality: fully functional, 1 x Fortress Technology metal detector with push-arm reject system into a lockable bin. This machine meets full retail specification and features low-air monitoring, bin-full montoring and bin-door open monitoring. Model - STEALTH. Dsdpfjzgwp Tjx Aidsuw Serial number - EQC-1408. Date of manufacture – 2016. Aperture dimensions – 350mm wide x 200mm high. Belt – Intralox, 1750mm long x 300mm wide. Overall dimensions – 1750mm long x 1100mm wide x 1200mm high. Electrical requirements – 110-230 V / 50 Hz / 1 phase. Power - 16 A.

Condition: used, The Inauen VC999 03 i FNS is a professional double-chamber vacuum packaging machine designed for industrial food packaging applications. Its dual-chamber configuration enables continuous operation and increased productivity by allowing one chamber to be prepared while the other completes the vacuum cycle. The digital control system provides precise adjustment of vacuum and sealing parameters for different product types. Constructed from stainless steel, the machine is ideal for meat processing plants, food production facilities, and commercial packaging operations. Technical Specifications: Manufacturer: Inauen Maschinen AG Model: VC999 03 i FNS Type: Double Chamber Vacuum Packaging Machine Power Supply: 400 V / 3 Phase Frequency: 50 Hz Current Consumption: 15 A Duedszgnxrjpfx Aidjw Power Rating: 9 kW Fuse Protection: 25 A Operating Air Pressure: 5 – 6 bar Controls: Digital Control System Construction Material: Stainless Steel Application: Vacuum packaging of meat, cured products, cheese, fish, and other food products

Condition: used, The Boss X 660 is a professional double-chamber vacuum packaging machine designed for industrial food packaging applications. Its dual-chamber configuration enables continuous operation and increased productivity by allowing one chamber to be loaded while the other completes the vacuum cycle. The digital control system provides precise adjustment of vacuum and sealing parameters, ensuring reliable and consistent packaging results. Constructed from stainless steel, the machine is ideal for meat processing plants, food production facilities, and commercial packaging operations. Technical Specifications: Manufacturer: Boss Model: X 660 Type: Double Chamber Vacuum Packaging Machine Power Supply: 400 V Duedpfx Aozgldroidow Frequency: 50 Hz Power Rating: 4 kW Controls: Digital Control System Construction Material: Stainless Steel Application: Vacuum packaging of meat, cured products, cheese, fish, and other food products