Italmac s.r.l.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231486, Used, refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical specifications: X-axis travel: 2,500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Godpfxsyir Uqs Aa Djin B-axis: +/- 105° Working table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer capacity: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be inspected under power by appointment. Technical data and information subject to change and error; prior sale excepted!

Condition: used, Year of construction: 2016, operating hours: 11,159 h, machine/vehicle number: 11415746054, Travel distances (X/Y/Z): 500x450x400 mm, 30-position tool changer SK40, weight: 4,450 kg, control: SIEMENS, 1 chip conveyor, 1 band filter system. Gijdjyidllepfx Aa Dsn

Condition: used, Year of construction: 2016, operating hours: 12,618 h, machine/vehicle number: 14585615844, Travel (X/Y/Z): 1,150x700x550 mm, 120-position SK40 tool changer, weight: 9,650 kg, control: HEIDENHAIN, 1 chip conveyor, 1 belt filter system Gjdpfx Aasyidlfs Dein

Condition: used, Year of construction: 2003, machine/vehicle number: 16105, Travel distances X/Y/Z: 850x700x500 mm, tool holder SK 40, with tool changer, without probe, HEIDENHAIN control, weight: 10,500 kg, 1 cooling unit for lubricants ERBA KÄLTE GMBH, without probe, coolant lubricants must be disposed of by the buyer and the machine must be properly disconnected from the power supply, collection in week 7/8 from 08:00 to 16:00. Gedpfx Aajyidkzs Doin

Condition: used, Year of construction: 2017, operating hours: 20,384 h, machine/vehicle number: 20171011, 5-axis, travel paths (x/y/z): 670/820/600 mm, tool holder HSK 63, 96-position tool changer, recorded operating hours as of 05/25, 3D probe, laser workpiece measurement, rotary table Ø: 800 mm, power: 90 kVA, weight: 20,000 kg, chip conveyor SIN MIN MCG-5X, coolant pump LIS, coolant treatment, without shown machine vices, ATTENTION. Removal is mandatory on 18/19.02.2026! Giodpfeyidknox Aa Djn

Condition: used, Year of construction: 2018, operating hours: 15,233 h, machine/vehicle number: 20180707, 3-axis, travels (x/y/z): 1060/600/600 mm, SK 40 tool holder, 40-position tool changer, read operating hours as of 05/25, spindle speed: 10,000 rpm, 3D probe, measuring axis, power: 30 kVA, weight: 7,800 kg, chip conveyor SIN MIN M1050, year of manufacture: 2018, serial no.: 646, coolant treatment system HOMEWAY PF-120, year of manufacture: 2018, without the depicted magnetic clamping plate and machine vices, NOTE: Removal only possible on 23/24.03.2026, position 123 must be removed beforehand. Gijdpfx Aoyidkhsa Dsn

Condition: used, Year of construction: 2004, operating hours: 77,374 h, machine/vehicle number: IntNr231477, Vertical CNC Machining Center CHIRON MILL 6000 high speed with NC swivel head Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 The machine underwent a complete factory overhaul by CHIRON in 2013. Operating hours: approx. 80,374 h Spindle replacement: March 2021 – spindle hours: approx. 8,000 h Maintenance performed: January 2024 Technical Specifications: Control: Siemens 840D (PCU50, NCU572.4) NC swivel head High-speed package: Motor spindle 12,000 rpm, 140 Nm Axis travels: X 6,000 mm / Y 630 mm / Z 550 mm Rapid traverse in X / Y / Z: 60 m/min Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal Production package: - Scraper belt conveyor, discharge height 1,050 mm - Preparation for internal coolant supply (IKZ) - Vacuum rotary filter KNOLL VRF250 (suitable for steel, cast iron, aluminum, plastic, brass) - High pressure 70 bar with HP pump and variable valve - Automatic loading doors - Central partition for pendulum machining - 92 tool positions HSK-A63 (rear magazine) - 5-axis milling package - Air blast - Tool life monitoring - Additional V24 RS232 interface in electrical cabinet - BDE/MDE interface (states: machine on, machine running, piece counter) - Marposs (Brankamp) collision monitoring CMS100 - 3D machine model for kinematic simulation in CAM programming system - Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring Linear clamping system KOHN 8 hydraulic clamping vises KOHN Multi 2000 MFS 125/680 HD Gsdpjyg Nqwefx Aa Doin Two-part operator platform (tread grid) across the full 6,000 mm operating width Dimensions and Weight: Machine height: approx. 3,000 mm Total weight: approx. 20,000 kg The machine can be inspected under power by appointment. Technical data and details are subject to change or error, subject to prior sale.

Condition: new, Head machining Gjdpfx Ajygg Nqja Djin HSK 63

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: SIEMENS, controller model: 840D sl, number of axes: 4, This 4-axis HELLER MC 20 was manufactured in 2019. It features a Siemens 840D sl control system, with X, Y, Z travels of 800 mm, 750 mm, and 800 mm respectively. The spindle supports a speed range of 5-16,000 rpm with a drive power of 34 kW. It includes a 44-position tool magazine and a rotary table diameter of 520 mm. Consider the opportunity to buy this HELLER MC 20 horizontal machining centre. Contact us for more information. Gedpeyf Nntsfx Aa Dsin • Working area: • Feed forces (X/Y/Z): 10,000 N • Speeds and dynamics: • Rapid traverse X/Y/Z: 60,000 mm/min • Acceleration: X = 7 m/s², Y = 8 m/s², Z = 6 m/s² • Spindle / machining unit (HSK-A63): • Tool interface: HSK-A63 • Spindle diameter in front bearing: 70 mm • Tool management: • Tool magazine type: HSK-A63 • Number of tool positions: 44 • Max tool weight with all pockets occupied: 6 kg • Max tool length: 550 mm • Max tool diameter: • With all pockets occupied: 120 / 80 / 80 mm • With adjacent pockets free: 150 mm • Minimum chip-to-chip time (VDI): approx. 3.3–4.4 s • Rotary axis: • A-axis with rotary table diameter: 520 mm • Interference circle diameter (A-axis): 1260 mm • A-axis speed: 17 rpm • Indexing resolution: 360,000 × 0.001° • Indexing accuracy (VDI/DGQ 3441): 12 arc sec • Measuring system: Direct, absolute linear scales • Utilities: • Power supply: 400 V / 50 Hz • Total connected load: approx. 27–30 kVA • Compressed air requirement: 4.5–6 bar • Condition and documentation: • Machine is in very good technical condition • Complete service documentation available Additional equipment • Dedicated loading and unloading system

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) Gedpjyf E R Dsfx Aa Dsin • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Giodpfx Aasydnncs Don Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications!

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231476, Haas Mini Mill NC Control: HAAS CONTROLLER Travel (approx.): X = 406 mm, Y = 305 mm, Z = 254 mm Table size (approx.): 914 x 305 mm Spindle speed: 6,000 rpm / 45 Nm at 1,200 rpm 10-position tool changer, SK40 taper Max. distance between table and spindle nose: 102 – 356 mm 10-tool magazine Tool measuring system Rotary table USB & RS232 interfaces Automatic central lubrication system Program support with G/M codes Gisdpfxsydd E Ds Aa Den Tool load monitoring Coolant system Dimensions (L x W x H): 1,880 x 2,007 x 2,692 mm Machine weight: 1,542 kg The machine can be inspected under power by prior appointment. Technical data and information are subject to change and error. Interim sale reserved.

Condition: used, Year of construction: 2022, operating hours: 12,787 h, machine/vehicle number: M210019, comprising: FP 600 Duo complete, complete laser station, SIC MARKING, type XXL-BOX 1200, year of manufacture 2021, washing machine, filter system for the washing machine, oil separator, ultrasonic cleaning, 1 robot of type IRB 4600, version IRB 4600-40/2.55, IRC5 Single Giedpfx Aasycivfj Djn

Condition: ready for operation (used), Year of construction: 1999, overall weight: 70 kg, number of axes: 5, This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machine's power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information. Godpfeyblnuox Aa Dsin • Voltage: 3PE ~ 400 V • Frequency: 50 Hz • Current: 22 A • Power: 15 kVA • Control voltage: 24 V

Condition: good (used), Year of construction: 1999, functionality: fully functional, Year of manufacture: 1999 Width: 1200 mm Length: 1200 mm Number of axes: 5 Tool holder: SK50 Spindle speed (RPM): 3,500 Gjdex Uwtkopfx Aa Dsin Workable materials: Steel, aluminum, titanium, graphite, copper, invar, composite, Delrin, Peek

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Giedpfex S Etmsx Aa Djn Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, controller model: Sinumerik, total height: 2,800 mm, overall weight: 20,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 28,000 W, tool weight: 6,000 g, This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Required installation space (length x width): approx. 5950 mm x 6700 mm • Weight (kg) including coolant system and chip conveyor: approx. 25000 kg • Operating voltage: 400 v 3 n~ 50 hz • Control/valve voltage: 24 v dc • Machine power rating: approx. 82 kva • Back-up fuse before main switch: 3 x 160 a • Connector cross-section: 70 mm² Extra Information Ott Tool Clamping System Torque (S1/S6): 63/83 Nm Nominal Speed: 4200 rpm Spindle Bearing Diameter: 70 mm Spindle Lubrication: Lifetime grease lubrication 1 Horizontal 180° swivel support (W-axis) Faceplate Diameter (NC drive/counter bearing): 500/345 mm Permissible Tangential Torque: 15000 Nm Positioning Accuracy: ±3 angular seconds Swivel Time (0°/180°): Approx. 6 s Number of Horizontal 360° Workpiece Support Axes Positioning via Face Gearing: 120 x 3° Positioning Accuracy (120 x 3°): ±3 arc seconds Max. Transport Load per A-axis: Approx. 600 kg Permissible Tangential Torque: 5000 Nm Working Area (interference circle x length): Ø700 x 940 (1036) mm Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control) Positioning Accuracy: ±25 angular seconds Gedpfx Aex Nr Iloa Djin Permissible Tangential Torque: 1000 Nm Tool Magazine: 90 tool positions (3 x 30) Max. Tool Diameter with Free Adjacent Positions: 160 mm Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s Media Hydraulic Unit Capacity: 160 l Max. Operating Pressure: 160 bar Max. Flow Rate: 12 l/min Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar Factory Air Quality: Class 545 according to DIN-ISO 8573-1 Coolant System: Knoll coolant system with coolant cooling Coolant Tank Capacity: Max. 1400 l Separate Machine Bed Flushing: 160 l/min at 2.6 bar External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar Dimensions Machine Depth 5450 mm

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg Giodpfxox H Ib Ns Aa Don SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: MAKINO, controller model: Pro5, table load: 1,200 kg, tool weight: 20,000 g, number of axes: 4, This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Additional equipment • Spindle cooling • Tank system with Knoll compact band filter, 3200 liters • Coolant supply through the spindle • Oil mist extraction • Scraper belt conveyor • Conversion kit for stand-alone operation (currently used as a system machine) Machine Benefits Technical Machine Benefits • Transverse movement (x-axis) of the column: 900 mm • Height adjustment (y-axis) of the spindle unit: 800 mm • Longitudinal movement (z-axis) of the table: 1020 mm • Permissible swivel diameter in the working area: 1000 mm Gjdex D Ngxspfx Aa Dsin • Max. Swiveling height from pallet surface: 1300 mm • Pallet size: 630 x 630 mm • Pallet – nc – rotary table with 4th nc axis • Input resolution: 0. 001° • Positioning accuracy: ± 3 arcseconds • Tool magazine with 242 storage slots Extra Information Power Supply 400 V, 3-phase AC, 50 Hz Power rating: 72 kVA Control System Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection Adaptive feed control Compressed air through the spindle Knoll compact band filter, 3200 liters Magnetic separator Double-switching filter for IKZ Coolant supply through the spindle Compressed air through the spindle Oil mist extraction Scraper belt conveyor Control System: Makino Pro5 Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection (parallel to main operation) Adaptive feed control Conversion Kit for Stand-Alone Operation (Currently used as a system machine (FFS/FMS)) Pallet changer with placement of 2 pallets in alternating cycles onto a station positioned outside the working area Pallet holder rotatable, indexed at 90° intervals, 0-position electronically monitored Coding for automatic program call when inserting the pallet Pallet storage station secured with a protective device and electrical interlock

Condition: ready for operation (used), Year of construction: 2009, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2009. A horizontal machining centre with a voltage of 400 V, frequency of 50 Hz, and a rated current of 123 A. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. • Voltage: 400 V • Frequency: 50 Hz Giodex D Rh Djpfx Aa Don • Rated current: 123 A

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment Gedpfx Aaox D Skme Dsin • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 600 mm, FOR SALE — Soenen Hendrik CNC Machining Line for Aluminum Window & Door Profiles A Soenen Hendrik aluminum CNC processing line, fully operational and available for demonstration. Offered due to replacement by an in-house developed CNC system. Key Features ✔ Fully operational and available for on-site demonstration ✔ Automated profile handling: infeed and outfeed transport ✔ Capable of processing up to 20 profiles consecutively without manual intervention ✔ Equipped with 18 milling spindles: • 5 upper and lower (including 1 angled spindle) • 4 front and rear spindles ✔ 600 mm saw with adjustable cutting angle (22°–158°) ✔ Slot milling unit — ideal for T-profiles, mullions, etc. ✔ Automatic label application on finished profiles ✔ Compatible with UniLink for machine control ✔ Outfeed conveyor for scrap/waste removal ✔ Includes UPS emergency power supply ✔ Integrated cameras for process monitoring This machine is an ideal solution for manufacturers looking for automated CNC processing with high throughput and minimal operator involvement. Gedpex Dcnpefx Aa Doin Contact us for pricing, inspection, or additional technical information.

Condition: excellent (used), Year of construction: 2000, operating hours: 59,458 h, functionality: fully functional, machine/vehicle number: 1926, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table width: 1,800 mm, table length: 2,200 mm, table load: 15,000 kg, overall weight: 48,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, power: 48 kW (65.26 HP), quill diameter: 130 mm, quill travel distance: 630 mm, Equipment: cabin, rotational speed infinitely variable, Technical Specifications Giodjxyu Dzjpfx Aa Den X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm Table size: 1,800 × 2,200 mm Table load capacity: 15,000 kg Spindle speed (max): 2,500 rpm Spindle diameter: 130 mm Control: HEIDENHAIN TNC 426 Number of axes: 5 Automatic tool changer: 60 positions Tool holder: ISO 50 Operating Hours Machine on-time: 59,458 h Spindle running hours: 23,258 h Equipment & Features Operator's cabin Complete machine documentation included

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: Giedpfjxxvtuox Aa Den # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm Godexxkd Ujpfx Aa Dsin # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)