MPH Metall Präzision Halbwachs GmbH

Condition: good (used), Year of construction: 1979, machine/vehicle number: 1425, Offer 25414 Technical Data: - Drilling capacity in steel ST 60: 32 mm Kedpfox Hgixex Agzjnf - Drilling capacity when reaming: 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Arm reach min. / max.: 250 / 1000 mm - Arm lift: 600 mm - Min. / max. distance, spindle to base plate: approx. 650 - 1250 mm - Machined base plate clamping surface: 1150 x 700 mm - 8 spindle speeds: 100 - 2240 rpm - 4 feeds: 0.15 - 0.30 mm/rev - Drill spindle drive: 400 V / 3.5 kW - Cube table - Coolant system - Space requirement approx.: 1700 (W) x 1960 + 500 (H) x 700 mm - Weight approx.: 1200 kg

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Knodpsx Hfugofx Agzef Operating manuals

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T Knodpfx Aex Eb Rfegzjf

Condition: good (used), Year of construction: 1986, functionality: fully functional, throat depth: 1,250 mm, spindle mount: MK 5, VEB Werkzeugmaschinen Magdeburg Type: BR40/2 x 1250 Refurbished around 2020 Year of manufacture: 1986 Drilling capacity in steel: 40 mm Outreach: 1250 mm Max. workpiece height: 1390 mm Clamping surface: 1450 x 920 mm Table surface: 750 x 1350 mm Clamping surface: 1450 x 920 mm Spindle taper: MK 5 Total power requirement: 5 kW Clamping cube: 620 x 500 x 500 mm Weight: 3 t Ksdpfjxzr Tpsx Agzonf The drilling machine must be dismantled or collected by December 2025. You can inspect and test the machine at any time. Location: Leipzig.

Condition: good (used), 12 speeds 44–1500 rpm. Kjdexxv Raepfx Agzonf TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Transport dimensions: Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement. Kjdpfsxxpcpex Agzonf

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis Ksdpexxpb Sofx Agzonf - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) - CNC adjustable with paper belt filter - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Kodpfxexwcyfo Agzsnf Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table Knjdpfjxvzx Dox Agzef - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Knodpexu Iarofx Agzef Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: excellent (used), functionality: fully functional, total height: 3,100 mm, drilling capacity: 50 mm, total width: 960 mm, total length: 2,180 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 38 rpm, spindle mount: MK 5, overall weight: 3,200 kg, type of input current: three-phase, Heavy radial drilling machine in very good and clean condition, including a large drilling cube and various quick-change tool holders. Knedpextf T Tjfx Agzsf

Condition: good (used), Year of construction: 1995, functionality: fully functional, Brand: WMW Heckert Model: BR 40/2 x 1250 Capacity: 40 mm Throat: 1,250 mm Spindle taper: MK4 Stroke: 350 mm Drill head (LxWxH): 600 x 800 x 500 mm Min. speed: 20 RPM Max. speed: 1,200 RPM Speeds: 3-step and variable Automatic feed Machine dimensions (LxWxH): 2,050 x 950 x 2,750 mm Machine weight: 3,000 kg Electric height adjustment Knsdpfx Agoxrv Ekjzef Electrically operated axis unlocking and locking Note: The information on this page has been obtained and assembled with the utmost care, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract, and we recommend checking all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: used, throat depth: 1,000 mm, total height: 2,360 mm, drilling capacity: 80 mm, total width: 900 mm, total length: 2,500 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 26 rpm, spindle mount: MK 4, The machine is being sold due to lack of space Knsdoxp Rd Aspfx Agzjf

Condition: used, functionality: fully functional, Maximum drilling diameter in steel mm 50 Spindle - MORSE 5 Maximum distance from spindle axis to column guide mm 1250 Minimum distance from spindle axis to column guide mm 320 Vertical arm adjustment mm 875 Spindle stroke mm 310 Spindle speeds: number of steps 16 speed range min-1 28-2500 Main motor power kW 4 Kjdpfx Asxk T Iajgzonf Total connected load kVA 6 Weight kg 4550 Manufacturer: Kovosvit, Sezimovo Ústí

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Machine clamps hydraulically, equipped with emergency stop. Kjdpfx Ajxftk Rsgzenf Under power in our warehouse.

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, Knedpfx Agoxddqrozof • coolant device

Condition: new, Year of construction: 2025, OSTERBERGER RB+G1300K Brand new conventional radial arm drilling and tapping machine Drill spindle radius 1,300 mm – Working area 2,200 mm x 1,600 mm Pneumatic radial arm clamping Maximum workpiece height 600 mm Drill spindle speeds 10 to 500 rpm – Drill spindle torque 72 Nm Max. drilling capacity in steel – with twist drill Ø16 mm / with hole saw Ø35 mm Tapping capacity – from M3 to M18 in steel Drill spindle stroke – 135 mm Work table size 1,800 x 1,000 mm with 7 T-slots and integrated tool cabinet Height adjustment range of the boom arm (on the drill column) 750 mm Dimensions approx. 1.9 x 1.4 m Weight approx. 950 kg Features: - Coolant system - Depth sensor for blind hole drilling Knedpfx Ajxc Uvcjgzjf - Quick-change tool holder

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Knodpfexcf Hfjx Agzsf

Condition: good (used), functionality: fully functional, throat depth: 1,250 mm, spindle mount: MK 5, Radial drilling machine type Reform RB50x16 for sale in good condition. The machine operates flawlessly. Inspection is welcome. Loading via forklift. - Drilling capacity: 50 mm - Tool holder: MK5 - Motor power: 4 kW - Arm length: 1600 mm - Quill stroke: 350 mm - Dimensions (L x W x H): Knedpfx Aoxbaqcogzof 2380.0 × 1000.0 × 2650.0 mm - Weight: 3500 kg Please feel free to contact us with any questions. A proper invoice will be issued.

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Year of Manufacture 2007 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Knsdpfxsxawcmo Agzjf Spindle Stroke 280mm Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom Knodpfx Agjxaaabezef - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: good (used), Stock no.: 3024 Manufacturer: GSP Year of manufacture: Type / Model: 405T125 Machine no.: 2913 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 40 to 1,800 rpm Feed: 0.09 to 0.36 mm/rev Ksdpfsw Rkc Asx Agzenf Control: conventional Arm reach: 250 to 1,250 mm Cube table: 800 x 560 x 600 mm Footprint: 1,800 x 800 mm Total connected load: kW Accessories/Equipment: clamping cube Condition: good, ready for operation Weight: approx. 1 t Dimensions: 2,000 x 800 x 2,500 mm

Condition: used, Year of construction: 2021, gebraucht 2021 3965 prompt, Zwischenverkauf v Taiwan 15600 € 1 12480 € 42 mm MK 4 280 - 1.100 mm 44 - 1.500 (12) U/min Stahl: M 25; Guss: M 38 1880 mm 870 mm 2210 mm Knjdpfx Aow Np Nxsgzof 1800 kg 470 - 1.270 mm 0,05 - 0,15 (3) mm/min 2.2 kW 260 mm 280 mm 1.725 x 715 x 180 mm 0,75 kW 635 x 520 x 415 mm 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg Knsdpfxsw Hanhj Agzjf

Condition: good (used), COLETT / GAMESA - Radial drilling machine, mobile use possible using crane - Arm approx. 1200mm - Universal angle head - Spindle speeds 95 - 750 rpm - Automatic feeds - Morse taper MK 4 - Arm height adjustable approx. 1400mm - Control cabinet - retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500 kg Kjdpfx Agew Dpn Ejzonf Errors and input mistakes excepted.