Jib crane

Abus C2-16183158-0010

Condition: excellent (used), Year of construction: 2016, 1. Gas burner WEISHAUPT WM - G30 - 3800 kW, with gas line Dungs DN 65 Output: 400-3800 kW Design: ZM-LN Year of manufacture: 2016 2. Gas burner WEISHAUPT WM-G30/2-A - 4100 kW, with gas line DUNGS DN65 Output: 450-4100 kW Design: ZM Year of manufacture: 2010 Hfsdpfx Aiswg Hkce Nji 3. Gas burner WEISHAUPT G50/1-B - 4000 kW, with gas line DUNGS DN65 Output: 550-4000 kW Design: ZM-NR Year of manufacture: 2004

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Hfsdpfx Aieyinu Ho Noi Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Hfjdsu Nvmqspfx Ai Nsi Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg Hfodpfxsudv Tko Ai Nji 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Year of construction: 2016, condition: good (used), Abus overhead crane, with profile rails: 2 pcs a 6000mm , 3 pcs a 2600mm, electric chain hoist with bottle, connecting material Crane is dismantled and stored Hfsdpfspdnw Nex Ai Nsi

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Hfsdpfxjvwfqwo Ai Nji

Condition: good (used), Year of construction: 1965, weight max. 250 kg throat 2.500 mm height 3000 mm Base plate 600 x 600 Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm Hodpfx Aijvylh Ij Njfi

Condition: excellent (used), Year of construction: 2016, Electric scissor lift 7.8m Snorkel 3219E personal lift Snorkel personal lift, scissor lift, lifting basket for sale in excellent condition make: Snorkel 3219E production year 2016/11 Electric scissor lift, lifting basket Working height: 7.8 m Platform height 5.8 m Platform length: 1700 m Platform width: 740 mm Platform extension: 0.91 m Basket capacity 250 kg People: 1-2 Battery charger: Yes operating hours: 58 Own weight: 1611 kg battery status: approx. 80% Tires: non-marking tires Hfjdpfem Harmjx Ai Nei track width: 820mm Full length 1850 mm Overall width: 760/820 mm Total height: 2150 mm

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Hjdpfx Aioi Dphto Njfi Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1981, arm length 3600 mm Hfodsxtqwqspfx Ai Nsi total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm height of hook ca. 4000 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled.