Shelf trolleys

Alu 1700/760/H1780 mm

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler A-axis : +/- 120 Ksdpfx Abjur Ng Uo Tsww C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler

Year of construction: 2020, condition: excellent (used), Tom Chandley Compacta deck oven Kwsdpfx Aboi Dyh Uj Tsw Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Kwedpfx Absx D Ux Tj Tjw Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount Kwsdewfdzcspfx Ab Tjw - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: ready for operation (used), Technical characteristics Volume: 12 m3 Useful dimensions : Length 7400 mm Width 1500 mm Height : 1350 mm External dimensions: 8400 mm x 2700 mm 28 circulation heating plates (Dimensions 6400 mm x 700 mm) Completely revised New vacuum pump 5,5 kW (TRAVIANNI) Power and Motors Overall dimensions Kwedpfx Abjt Hzvkj Tsw

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 182823025, functionality: fully functional, operating hours: 2,417 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 400 kg, controller manufacturer: Heidehein, overall weight: 13,000 kg, controller model: TNC640, nominal power (apparent): 60 kVA, rapid traverse Z-axis: 1,417 m/min, rapid traverse X-axis: 1,417 m/min, rapid traverse Y-axis: 1,417 m/min, workpiece diameter (max.): 500 mm, operating hours of spindle: 2,417 h, Equipment: documentation/manual, Perfect running machine, 5 axle G6 Axile. Kwjdsvumzxspfx Ab Tew Can be shown in running condition.

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 400/350/350 mm Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 NC-Swivelroundtable: B-Axis:-50°/+110° C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg Kodpfsyad A Ijx Ab Tjww In general: Toolmagazine:48 Stations Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: used, Year of construction: 2009, x-travel 620 mm y-travel 420 mm z-travel 400 mm spindle taper ISO 40 DIN 69871A spindle turning speed range 50 - 4000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - .: 90458 - perfect condition from educational institution Kwodpewplqmefx Ab Tew - Digital Read Out System Heidenhain ND780 - electronic hand wheel - mechanical hand wheels - hydr. tool clamping - cont. variable spindle speeds - cont. variable feed rates - horizontal milling spindle - drilling quill - Coolant equipment

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,737 h, machine/vehicle number: 302E110064, travel distance X-axis: 885 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, workpiece diameter (max.): 640 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 600 mm, spindle speed (min.): 15,000 rpm, operating hours of spindle: 10,687 h, number of slots in tool magazine: 48, tool length: 280 mm, tool diameter: 125 mm, Equipment: documentation/manual, Machine for sale: Quaser UX600 15C - universal machining center - manufactured in 2011 in Taiwan. - 5-axis machine with direct measurement on all axes Kwsdewlpywjpfx Ab Tew - control unit: Haidenhain iTNC 530 Operating hours: 39,737 Purpose: milling Machine length: 3700mm Machine width: 4000mm Machine height: 3100mm Machine weight: 12,100 kg Number of spindles: 1; spindle speed range: 15,000 1/min Strokes: X axis: 885mm; Z axis: 500mm; Y axis: 800mm Table external length: 600mm external width: 500mm Tool maximum tool length: 280mm maximum tool weight: 7 kg maximum tool diameter: 125mm tool holder: SK 40 internal cooling: yes The machine works in 3 shifts - every day! The machine comes with 20 SK40 holders!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 62,469 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine. • Working hours (as of 04.07.2023): • Operating hours: 62,469 h • Spindle hours: 17,307 h Kjdpfjydlacsx Ab Teww • Rotary/Swivel axes: • C-axis indexing: 360° • B-axis indexing: 0–180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions • Coolant system: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: External coolant supply • Rapid traverse (X/Y/Z): 50 m/min Additional equipment • Touch probe: TS 641