Strapping machine

AMPAG - KöLN Mano

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg Lhodpoqu N U Defx Akqjn 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm Lhsdowwl I Ijpfx Akqen min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Lhedpfx Akstmqi Deqon Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Lhjdpfx Ajug Edkjkqjn Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Lhodpfxohrm Iue Akqon Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. -Low-maintenance and low-wear strap frame. Ledopuy Itspfx Akqohn -Movable and lockable via foot casters. The machine can be demonstrated with power on.

Condition: good (used), Schmedt Präcoll edge-gluing machine, in good condition, immediately available. Lhjdpfx Ash H Iu Nokqjn If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises, subject to prior appointment.

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut Lhjdpfx Aokfvhkokqsn - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, overhauled in 2002 Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic approach - Drive: 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - including: - Bending angle adjustment - Hydraulic tension - Bending tools Lsdpfxshrdmbj Akqjhn

Condition: good (used), Year of construction: 1996, 2 lines of ridgid box making machines with an extra lid-closing machine at the end of the 2 lines. Ledpfsi Dpb Uox Akqohn Price is 12.500,- € for each line. Sold only as set.