Shrink Tunnel

AMTEC POF-XTRA

Condition: excellent (used), We have a BECK HV600 shrinktunnel available. This machine is ready after complete maintenance and is working like new! The measurements are in the pictures. Pgodpfx Aohcdhlomijk

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg Pgsdpfx Ajv Aiymsmiok External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Capacity: 1 - 2 bales/hour Number of bindings: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003-2005 I also have Strautmann PP 1207 balers from 2009-2011 for 5500 EUR I also have Strautmann PP 1208 balers from 2014-2015 Strautmann AutoLoadBaler from 2018 for 7000 EUR

Year of construction: 1989, condition: used, Standard equipment Pedpfxjbriv Ns Amiogk

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. Podpsvy Drxsfx Amiogk More information or photos by email or phone.

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Air volume: 700 m³/h Engine speed: 900 rpm Pgjdpevcq E Defx Amijk Power: 0,25 kW Length: 3 m Width: 1,25 m Height: 2,1 m Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Psdpfxeva Ekvs Amiegk Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Cans and PET bottles Light valuable materials Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Pgodpfx Ajvvk T Ijmiek Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 0790505, 1 X Rochman TR45/90H250 Heat Shrink Tunnel. The Rochman TR45/90H250 Heat Shrink Tunnel is a robust and essential piece of equipment designed to work seamlessly with an L-seal or side-seal shrink wrapper, this tunnel applies precise heat to shrink film tightly around items, ensuring excellent product presentation and protection. Pedpfjw Evkcjx Amisgk Technical specification: ⚙️ Manufactuer - Rochman ⚙️ Model - TR45/90H250 ⚙️ Machine number - 0790505 ⚙️ Year of manufacture - 2005 ⚙️ Power - 400V | 12-20Kw | 17-60A | 50Hz ⚙️ Weight - 394Kg General information and benefits: ✅ Optimal Shrink Performance: Engineered to provide uniform heat distribution, resulting in a smooth, clear, and wrinkle-free shrink wrap for a polished final product. ✅ Versatile Product Handling: The model designation (likely indicating aperture dimensions of approximately 45cm width, 90cm length, and 25cm height) suggests it can accommodate a good range of product sizes, from small individual items to larger multi-packs. ✅ Adjustable Controls: Typically features precise temperature control and adjustable conveyor speed, allowing operators to fine-tune the shrinking process for various film types and product characteristics. ✅ Robust Construction: Built for durability and reliable operation in demanding production environments, ensuring a long service life. ✅ Enhanced Product Protection: Creates a secure, tamper-evident, and dust-proof package, ideal for transport, retail display, and extended shelf life.

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Pgsdpfsv Alacjx Amiek Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: reconditioned (used), Year of construction: 1996, Completely reconditioned BVM shrink tunnel. Pgsdeuihczepfx Amijk