Thermoforming Machine

AMTEC TFFS-18

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Rcedpetndpzofx Anksb Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: ready for operation (used), MULTIVAC R-535 - 2011 - YEAR OF MANUFACTURE – 2011 Rjdpfx Anox A Aikjkjcb - THE MACHINE WORKED IN SWITZERLAND AND WAS VERY THOROUGHLY SERVICED. - IN 2025, A COMPLETE TECHNICAL INSPECTION WAS PERFORMED BY MULTIVAC SERVICE IN SWITZERLAND. - THE MACHINE USES HARD AND SOFT FILM. - PERFECT TECHNICAL CONDITION. - ONE SET OF MOULDS - EACH OTHER SET IS UPON CUSTOMER REQUEST - ADDITIONAL PRICE FOR THE SET: 9,000 EUR. -THE MACHINE CAN BE VIEWED AT OUR COMPANY'S OFFICE.

Condition: good (used), Groen DH/1-40 Boiling pan kettle Redpfx Anet T Ef Aekecb Serial: 77863 Stainless tipping kettle, jacketed, Natural gas, Heat input 24.5Kw, with lid, 1Ph

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Rodsw Ewd Repfx Ankocb

Year of construction: 1997, condition: excellent (used), Multivac R 230 MC Thermoformer Manufacturer: Multivac Model: R 230 MC Machine number: 179 Year of manufacture: 1997 Power supply: 400 V, 3 phases, 50 Hz Power: 15 kW Current consumption: 36 A Film width: 340 mm Rcjdpfx Aex E Dpgonksb Tool format: (2×) 310 × 215 mm Overall machine dimensions: 5500 × 950 × 2000 mm Multivac film scrap suction unit, type: F-CEVF 3718-3 Suction unit dimensions: 600 × 700 × 1400 mm No vacuum pump No discharge conveyor The Multivac R 230 MC Thermoformer is a versatile and reliable machine designed for forming, packing, and sealing food products in both rigid and flexible film packaging. The machine enables the production of dual-cavity packs (2× 310 × 215 mm), ensuring high throughput and consistent packaging quality. The R 230 MC model is a proven solution for food processing facilities seeking a robust and efficient packaging system. The integrated film scrap suction unit improves workplace cleanliness and ergonomics.

Year of construction: 2025, condition: new, Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm; lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900µm, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loading area: 120cm – 150cm (optional: additional length); max. speed of the machine in neutral: 8 cycles/min; power: 3P, 380V, 50/60Hz; air: 1.2m³/min, 8bar Rjdpfov Nk Acjx Ankecb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 00584, total length: 5,000 mm, total width: 1,000 mm, total height: 1,800 mm, MINIPAN breadstick production line from the Italian specialist in food machinery and production lines. Machine in excellent condition, very little used. The Minipan solution for breadsticks, grissini, and thin bread snacks. Versatility in the service of creativity. This flexible breadstick machine with liftable tray system is recommended for medium-sized production needs. With a complete range of customizable options, the shapes and sizes of the grissini are no longer a limitation. It guarantees outstanding performance with minimal labor. This machine embodies the Minipan spirit: automation open to enhancements. Rcodpfx Ajx Iu Nionkob The blue conveyor belt is not included. The machine is located in the Liège region of Belgium. It must be dismantled and transported by the buyer.

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Rsdpfxjd S Svhj Ankocb Chain lubrification

Condition: ready for operation (used), functionality: fully functional, The Multivac R230 thermoforming machine is a packaging system designed to meet industrial requirements for thermoformed packaging, making it particularly suitable for the food and professional sectors. It is capable of producing precise packaging using either semi-rigid or rigid bottom films and flexible top films, ensuring excellent sealing and optimized material usage. Moreover, the machine is equipped with advanced features such as gas flushing or vacuum, which improve the preservation of sensitive products. As a result, it is commonly used for packing meat, cheese, prepared meals, or products that require modified atmosphere packaging. The Multivac R230 is engineered to integrate into production lines, typically with an overall length between 5,800 and 7,800 mm, a width around 1,000–1,100 mm, and a height of approximately 2,050–2,150 mm, depending on the discharge configuration and associated accessories. Despite its industrial size, the machine maintains a compact footprint suitable for existing facilities. Its ability to handle various film formats and molds makes this thermoforming machine versatile for different tray or container sizes. Drive power varies depending on the version and options; several listings indicate installed power ranges from around 8 kW to 14 kW, with a 400 V three-phase power supply (3+N, 50 Hz), ensuring energy efficiency for high-throughput operations. Therefore, the Multivac R230 remains a preferred choice for operators seeking a reliable machine capable of continuous cycles without loss of consistency or precision. Its robust stainless-steel construction and compatibility with labeling or printing systems further support integration into modern packaging lines. Technical specifications: Dimensions (L x W x H) in mm: (612 , 130 , 213 mm) Packing formats: multiple, depending on tooling Functions: thermoforming, vacuum, gas flushing, sealing Machine length: approx. 6 to 8 m depending on configuration Electrical supply: 400 V – three-phase – 50 Hz Rodpsx Itagofx Ankscb Installed power: approx. 5 kW Construction: industrial stainless steel

Year of construction: 2022, condition: ready for operation (used), A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible. Rcsdpewt A U Rjfx Anksb