Screw compressor

Atlas Copco G15FF

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min Kjdpfoq E Irajx Agzjfa • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: excellent (used), Year of construction: 2018, operating hours: 7,800,000 h, functionality: fully functional, Horizon AFC-566-F combination folding machine year 2018 counter approx. 7.5 mil flat pile feeder 6 buckle plates Ksdsxdl T Uspfx Agzsfa cross folding knife MKU-38 mobile cross folder, turnable stream delivery excellent condition

Condition: like new (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, overall weight: 340 kg, fuel tank capacity: 500 l, volume flow: 1,994 m³/h, noise level: 67 dB, Atlas Copco G15FF screw compressor Specification: • condition - used • manufacturer - Atlas Copco • model - G15FF • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power - 15.0 kW • tank - 500 l • maximum operating pressure - 10.00 atm • working hours under load - 175 mth • working hours - 715 mth • built-in refrigerant dryer Kedpfovkxrnex Agzsfa • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • 2022 year of production • weight - 340 kg Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the Kfodpfx Aeuxmt Tegzja foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Ksdpfxehbg Uxe Agzsfa Increases efficiency

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Kfedpfx Aovz Aprogzsa Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries! Kjdpjq S N Iijfx Agzsfa

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm Kfedpsh Tm Dusfx Agzsa POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Kfsdpfxjtpu Szs Agzja Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Kfodpfx Agoxnnd Rszsa Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug