Screw compressor 3.2-6.9 m³/min (defective)

Atlas Copco GA18VSD FF

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions Bodpfx Aou Rptysgzoct

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Bjdpfx Agew Rntrezect Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Bcjdeh Ha Ipopfx Agzst Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control Bjdpfx Aefv H Ehogzjct • Brake motor • Emergency stop

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Bsdpev Szt Dofx Agzect Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Bcedpjv Iplaofx Agzjt Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Bedpfx Ajukdfpegzjct Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Bsdpfsiv S Avsx Agzoct Includes sets of wheels (See photos).

Condition: new, Year of construction: 2025, Patented mitering system Bcedpfxsh S Nxpe Agzot Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic clamping of the material High-performance frequency-controlled band drive Swivel range 30° right / 45° left Cutting range in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remaining piece length without bundle clamping 60mm Recommended options: Micro spray device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Bcsdpfx Aohwv Tfjgzjt Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)