Screw compressor 45 kW GA45

Atlas Copco GA45

Condition: excellent (used), Year of construction: 2017, operating hours: 20,608 h, functionality: fully functional, Second-hand screw compressor Atlas Copco GA45VSD+FF. 45 kW, integrated dryer and inverter. 13 bar with 9.28 m³/min. Year of manufacture: 2017. Iedpexv R Nrefx Agzebf

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Ibedpfx Aovdknzjgzof

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Iodjxdc Uvspfx Agzebf

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator Ibsdpfx Ajv Snn Ijgzef System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Ijdeiv S Avspfx Agzjbf Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Condition: excellent (used), Year of construction: 2006, ATLAS COPCO GA45plus screw compressor after service Technical data: capacity: 8.56 m3/min; 45 KW motor,; 7.5 bar max pressure; year;2006 mileage;12746h!!! Iodpfx Agjri Rmwszsbf 25500 net 31365 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: good (used), functionality: fully functional, overall weight: 1,150 kg, Year of construction: 2010, Compressor/Atlas Copco GA45P compressor Maximum allowable working pressure (MAWP) 7.8 bar/113psi Capacity 133.7 l/s 183.3CFM 8.02m³/min Voltage 400V 50Hz Power 45kW/60HP 2985 pbr/min Ibedpfx Agov Ey Tiozjf Weight 1150kg Year of manufacture 2010 Dimensions 2000x1000x1800mm

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Isdpfxeh Ha Ips Agzebf Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 6.72 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With refrigerant dryer 45 kw engine Capacity 6.72 m3/min Isdpfx Ageukvvaozjbf Pressure 7.5 bar The compressor is fully functional.

Condition: good (used), Year of construction: 2000, Year of manufacture 2000 Iedpfx Aewf U Dnjgzjbf 7.5 bar

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Ibodpsbpmv Sjfx Agzjf Rated drive power 5 HP Max. speed 1800 rpm Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Iodpfx Agjulkvdjzobf

Condition: good (used), Year of construction: 2007, overall weight: 1,400 kg, volume flow: 522 m³/h, pressure (max.): 12.8 bar, Equipment: refrigerant dryer, PROD. ATLASCOPCO TYPE GA45VSDFF YEAR 2007 CAPACITY (kW) 45 45kw OUTPUT (m3/min) 8.7 CIS (bar) 12.8 INVERTER yes BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED Iedpfxjvrg R Uo Agzobf

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Isdpfx Agow Rntrjzjbf Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: good (used), Year of construction: 2008, volume flow: 464.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA45 S/N - API595605 YEAR - 2008 POWER (kW) - 45 Iodpfx Ajrztmwjgzsbf OUTPUT. (m3/min) - 7.74 CIS (bar) - 7.5