Second-hand machinery for sale (2,391)

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Cjlim Rencd S Us Axsgt Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, Automatic Double Exit Sheeting Machine Cgjliov U U Rzom R Axst Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, 1 guillotine shear, Schechtl type MSB 300/NC, year 1982, serial no. 7119, max. sheet thickness 2.5 mm, working width approx. 2,500 mm Coliowg D Rgjm R Axegt

Condition: repair required (used), Functionality: limited functionality, fuel type: diesel, color: orange, operation weight: 1,700 kg, Year of construction: 2020, operating hours: 162 h, machine/vehicle number: 20211600452, Operating hour meter: 162mth Engine power: 17.8kW (2800rpm) Engine: KUBOTA D1105-EF03 1.1L, serial no. 1LV1178, Year of production: 2020 Fuel type: Diesel Starter: electric Centrifugal force: 72kN Vibration frequency: 42Hz Outer width of drum: 850mm Drum diameter: 573mm + Akerströms radio remote control, type MC11-OPS. Cjletqdpdjim R Axegt The motor starts for a few seconds and shuts off.

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Celsp Ecn Asim R Axsgt

Condition: used, Year of construction: 2012, Agnelli Type A-540 Ravioli/Cappelletti Maker. Serial Number S902.052 (2012) Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Cgolim Rev U U Iys Axst

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12056, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Colimswg D Rao R Axsgt

Condition: excellent (used), Year of construction: 2019, operating hours: 13,147 h, Functionality: fully functional, machine/vehicle number: 1527000505A, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain, controller model: TNC620, workpiece length (max.): 1,400 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,404 h, number of slots in tool magazine: 30, Equipment: documentation/manual, The machine has been checked by an authorized service and prepared for transport. Working time: 13147 mth Spindle working time: 5404 mth Cgolim Rovq Idmo Axst The equipment includes: tool probe, handheld remote control, swarf flushing gun, soda calibration mandrel for measuring the tool. The machine geometry has been checked -travel on the table in the X/0.008mm, Y/0.015mm axis -straight incidence of the X/Y axis 0.005mm, X/Z 0.005mm, Y/Z 0.003mm -travel on the mandrel 300mm from the X axis side 0.005mm, Y 0.006mm -spindle runout at the end of the mandrel 300mm, average result 0.006mm.

Condition: used, IMI Type 1500 Stainless Steel Pasteurizer Please Note: These lots are located in Preganziol, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Cgslim R Aowakr Rexot

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12054, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Cgslim R Aewg D N Aexet

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 395.900.219.1140, workpiece weight (max.): 1,000 kg, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,000 mm, input voltage: 400 V, rapid traverse X-axis: 600 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, tank capacity: 750 l, Equipment: documentation/manual, X, Y, Z axis travel: 600 x 400 x 400 mm Min./Max. distance table - chuck: 190-590 mm Min. surface roughness Ra 0.1 μm Dielectric tank capacity 750 l Cslimsvq I I Se R Axegt This machine is dismantled and ready for transport.

Condition: used, 1 extraction system, Kemper type 91, built approx. 2015, with piping Cjlim R Aswg D Nioxjgt

Condition: repair required (used), Year of construction: 2017, high-pressure casting seat, used to make magnesium castings, which includes a group of devices, the most important of which are: 1. RAUCH heating furnace, year of manufacture 2016 x 2 2. REGLOPLAST heating and cooling device, man. 2017 x 2 3. SPECIMA SM 2 biaxial injector, year of manufacture 2017 x 2 4. Trimming press, man. 1986 (after reconstruction in 2017) x 2 5. KUKA robot, year of production 2017 x 2 Cgolim Rjnmyqpe Axet 6. BUHLER GDM-H-630-B injection molding machine, man. 1997, (after reconstruction in 2017) 7. BUHLER GDM-H-400 8. 4 x Filters KMA

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 3250, Lagun type FBF 3250, control system Lagun CNC, T-slot clamping table approx. 700 x 3,250 mm, travel paths approx. X: 3,000 mm, Y: 940 mm, Z: 1,000 mm, swiveling milling head Celjwg D I Ejim R Axsgt

Condition: good (used), Year of construction: 2021, machine/vehicle number: 210802, fuel type: electric, The inner chamber measures 700mm x 700mm x 1000mm and is heated by an electrofusion wire spiral. It is insulated by ceramic fiber, and the overall dimensions of the unit are 1300mm x 1400mm x 1750mm Basic data: Power supply: 400V 3N~ 50Hz Rated power (kW): 18 Maximum temperature (oC): 1250 Chamber capacity (l): 490 Cgolimeuqi A Tj R Axjt Temperature control: 1-zone Uniformity of temperature distribution in the working chamber area: /- 2 oC Net weight (kg): 700

Condition: used, 1 x 3-axis CNC machining center Hurco type VMX 64, serial no. 0-7056, year of manufacture 01, T-slot clamping table approx. 600 x 1,600 mm, travels approx. X: 1,650 mm, Y: 850 mm, Z: 760 mm, control system Hurco, type Ultimax, 2 hydraulic clamping vices, 1 magnetic clamping plate Celowg D Hnsim R Axsgt

Year of construction: 2021, Condition: good (used), Functionality: unexamined, machine/vehicle number: 10002157, Basic data: Production speed: 600 pcs/min Diaper size: S, M, L, XL Overall dimensions: 30m x 10m Net weight: 47508kg Main equipment elements: - cellulose roll unwinder feeding the cellulose mill; - cellulose mill; - drum filter with suction fan; - drum forming the absorbent insert from non-woven fabric and SAP; - assembly for receiving the insert from the forming drum, applying glue and performing the first press of the insert; - processing assembly designed for cross-cutting and piece-cutting the absorbent insert, connecting plastic foil, fabric, absorbent insert, rubber on the outside of the insert, elastic tape, front and rear wings, along with final pressing of all elements; - RITTAL TS 8206.500 control cabinets; - electrical cabinet (switchboard) - American Fan Company fan; - Cimme fan type GFJ H09010 E1 RD - 5 glue applicators - SAP dispenser - camera system - PLC control system - exhaust pipes Documentation: *machine user manual (copy), *CE Declaration of Conformity (copy) Cgslovrd S Neim R Axet

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Cgjliewg D Eqom R Axjt

Condition: good (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: NG4124682, Wet wipes production line Production speed: 80 packs/min. (72 pcs./package, 5760 pcs./min.) Number of nonwoven fabric unwinders: 12 pcs. Nominal power: 3kW Power supply: 460/277V 3Ph 60Hz Weight: 2000kg Overall working dimensions (without packaging machine): length: 9309mm height: 2961mm width: 4478mm Working units: -nonwoven fabric unwinders, -moisturizing section, -cutting section, -wipe stacking section Flow-pack thermoplastic film packaging machine Power supply: 480V ~3 50/60Hz Efficiency: 80 packs/min. Cgslevunmpsim R Axet Welding: longitudinal, transverse Equipment: -control cabinet; -McLean Cooling Technology air conditioner -1-phase EATON S84N11E03XCE power transformer, 3KVA. -Allen-Bradley 1500P Solid State control panel. Documentation: -humidification section operating instructions (copy) -control cabinet wiring diagram -CLIPPER Rx100 line technical diagram

Condition: used, 1 x 3-axis CNC machining center Hurco VMX 42, Hurco type VMX 42, serial no. M442-06201072CFA, T-slot clamping table approx. 600 x 1,300 mm, travel X: 1,060 mm, Y: 610 mm, Z: 610 mm, control system Hurco, type Ultimax, with chip conveyor Cgolimswg D Edo R Axst

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 1A08052, clamping force: 3,430 kN, screw diameter: 60 mm, clearance between the columns: 810 mm, displacement volume: 763 cm³, injection pressure: 220 bar, mold height (min.): 300 mm, ejector force: 60,000 N, ejector stroke: 270 mm, plate length: 770 mm, plate width: 770 mm, plate height: 700 mm, total length: 8,070 mm, total width: 1,930 mm, total height: 2,400 mm, heating capacity: 27.5 kW (37.39 HP), pressure: 200 bar, power: 85.6 kW (116.38 HP), type of input current: three-phase, Electric injection molding machine from Japan's TOYO Machinery & Metal CO. LTD. Model: Si-350-6S/JH750E (L/D 24) PACK version The PACK series is dedicated especially to packaging production. Basic data: Installed heating power: 27.5kW Total installed power: 85.6kW Control: SYSTEM 800, interface Euromap 67, Euromap 73 Total external dimensions L/W/H: 8073mm x 1930mm x 2397mm Short-circuit force: 3430kN Spacing between columns: 810mm x 810mm Table dimensions: 1050mm x 1050mm Table opening stroke: 700mm Mold height min/max: 300mm / 770mm Ejector stroke: 150mm Ejector force: 60.0kN Auger diameter: 60mm Injection speed: 300mm/s Injection pressure: 220MPa Cslistwcdfem R Axsgt Compression pressure: 200MPa Theoretical injection volume: 763cm3 Injection: 848cm3/s PS injection capacity: 210kg/h Screw speed: 0-350rpm Injection stroke: 270mm Nozzle clamping force: 39.0kN

Condition: used, Year of construction: 2004, Soraluce type SP 10000, Heidenhain TNC 426 CNC control, serial no. 8701, year of manufacture 2004, travels approx. X: 8,500 mm, Y: 2,000 mm, Z: 1,200 mm, table size approx. 10,000 x 1,100 mm, total weight approx. 31,500 kg, automatic indexing milling head, 2-stage ZF gearbox, 60-station tool changer, horizontal and vertical tool change, 2 coolant systems, frequency-controlled high-pressure pump, chip conveyor, operator platform, etc. - ATTENTION: Difficult pickup conditions (crane required) Prior consultation or attendance at the viewing appointment is therefore strongly recommended. Colim R Aowg D Dtoxegt

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 61014832, clamping force: 4,200 kN, screw diameter: 80 mm, clearance between the columns: 800 mm, plate width: 1,230 mm, plate height: 1,270 mm, power: 75 kW (101.97 HP), We offer you Krauss-Maffei 420-3000 CH injection molding machine. Dimensions of the mounting plate (H x W) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Cgjlim Rjrdfyhe Axjt Minimum max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Rated power of pump motor [kW] 75 Rated power of barrel heating [kW] 29 Dimensions and weight (approximately) Own weight with control cabinet [t] 22.3 Dimensions (L x W x H) [m] 7.32 x 2.49 x 2.38 Machine disassembled, deposited in storage. In addition: WITMANN DFR-10 workpiece pickup robot (2010). MOTAN plastic feeder

Condition: used, Year of construction: 2008, Soraluce type FL-8000, year of manufacture 2008, serial no. 7854, Heidenhain CNC control, travels approx. X: 7,500 mm, Y: 1,400 mm, Z: 1,000 mm, table size approx. 8,000 x 2,000 mm, total weight approx. 18,300 kg, 40-station tool changer, max. tool weight 20 kg, automatic indexing milling head, cooling lubricant system 2 with internal cooling lubricant supply, tank volume 500 l + 250 l lifting tank and pump, variable frequency-controlled high-pressure pump, mobile operator platform, chip conveyor, work table field 9,000 x 2,000 x 300 mm, radio measuring touch system M&H 20.41, measuring station TT 140, etc. Cslim R Aswg D Daexegt

Condition: excellent (used), Year of construction: 2022, operating hours: 561 h, Functionality: fully functional, machine/vehicle number: 10104605, laser power: 3,000 W, Machine type: ByTube Star 130 Year of production: 2022 Serial Number: T22015 Machine number: 10104605 Power: 3kW Manufacturer: Bystronic Tube Processing S.p.A. Laser / Source: IPG Laser GmbH Model: YLS-3000-U Serial Number: 21129352 Year of production: 2022 Working time: 1679,97 hours Cutting time: 561,82 hours TECHNICAL PARAMETERS: Minimal length of pipe (profile) : 2500mm Maximum length of pipe (profile): 6500-8500mm Dimensions of profile diameter: min: 10mm, max 130mm Maximum speed of axles X / Y / Z: 200 / 60 / 60 m/min Maximum speed of spindle: 250 rpm Number of axles: 8 Weight: 12.000kg The machine operated until December 2023. It was constantly serviced in accordance with the manufacturer's requirements. In April 2024, the machine was launched together with the Bystronic service.: 1. The machine requires cleaning, a warning is displayed that the lower protective glass of the cutting head is dirty. 2. The machine's control software should be updated, the current one does not work well, the laser scan requires a restart after turning on the machine. 3. When moving the X axis to manually load a profile, the X axis error “CN0013 error too night during a movement axis X” 4. The bulk loader works properly. 5. The dust collector and the cooler work properly The machine is turned off now. Technical documentation is electronic. Cgjlimstqc I Rs R Axet The machine was bought new and has a full service history. New Software: - BVT 2.3.2 to the version BCCT 1.2.1, - PLC 3.13.4 to the version 3.16.1,