Second-hand machinery for sale (2,399)

Year of construction: 2001, Condition: used, Type of fuel: Petrol Empty weight: 260 kg Auction item. Ultralight urban aircraft in working condition. Registration: LY-BIK. Airplane time state: Fpsb Eowg Aukjh D R Ujg -TTAF 473 hrs; -Engine: Jabiru 2200A 85 HP, TSN 473 hrs; -Propeller: GT Propellers 473 hrs. Avionics: -EMS TL-3724, Radio, Transponder A, Intercom, Fuel meter.

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Fsb Eov Rxaxjh D R Uspg

Year of construction: 2022, Condition: good (used), Serial number 11261, 6-piece set - Subject to prior sale - Fpjb Ehjwazp Tj D R Ujg +++ Please note: This machine is part of an online auction! +++

Condition: used, Year of construction: 2018, operating hours: 4,823 h, power: 28 kW (38.07 HP), fuel type: diesel, Drive: Wheel Fpsb Eh Dowg Attj R Usg Empty weight: 1.679 kg Technical inspection expiration date: 2025 Auction item. Tractor in working condition. Sold without attachments. The reducer at the front left wheel is leaking oil. The limiter needs to be replaced.

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Fpeb Ehev Rw Nls D R Ueg

Condition: good (used), Year of construction: 2014, Serial No. 143703, digital display, Heidenhain, table, 600 x 200, X/Y/Z travel, 300 x 350 x 200 mm, max. speed 2,200 rpm, machine lighting, steel cabinet with 2 doors, tool carrier system, 3 levels, contents: lot of SK30 tool holders, tool changers Fsb Ehjwazpmo D R Ujpg +++ Attention: Machine is part of an online auction! +++

Condition: used, mileage: 1,771,154 km, power: 340 kW (462.27 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro5, Year of construction: 2012, Engine capacity: 12.902 cc Empty weight: 8.526 kg Carrying capacity: 9.474 kg GVW: 18.000 kg Technical inspection expiration date: 2026 Auction item. Truck in working condition. Sold as seen in photos. Fjb Eh D Rjwg Ap Us Uepg

Condition: good (used), last calibration Aug 2024 Fpeb Ehsv Rw Eyo D R Ueg

Condition: good (used), Year of construction: 1996, Serial No. 489, Operating Hours 38,433, Control, TRAUB, Type TX8F, 7 axes, main spindle, counter spindle, 2 turrets, 2 C-axis, 1 Y-axis, TRAUB/Stamag bar feeder, Type DN61, coolant system, parts removal, chip conveyor, air filter, accessories - feeder coupling defective +++ Attention: Machine is part of an online auction! +++ Fob Eh D Rswazlbe Uspg

Condition: used, power: 95 kW (129.16 HP), fuel type: diesel, Year of construction: 2007, operating hours: 13,800 h, Field of application: Construction Drive: Wheel Empty weight: 18.000 kg Feb Eh Dowg Apuj R Ujpg Auction item. Excavator in working condition. Key is broken, starts with a screwdriver. One cylinder of the blade leaks oil. Worn out pump, efficiency at high load about 90%.

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Feb Eh D Rov Rwz Ie Uepg

Condition: good (used), Year of construction: 2018, Serial No. ZH256, Control, Manufacturer: FANUC, Type: Series 31i-MODEL B5, 4 axes (X/Y/Z/A), X/Y/Z travel: 700 x 400 x 330 mm, NC dividing head, 21-station tool turret, BT 30 tool holder, max. speed: 24,000 rpm, coolant system, chip conveyor, air filter, 2-door tool cabinet, machine accessories, tool holder (with changer), Renishaw OMP 40-2 infrared probe Fpsb Ejwazgloh D R Uog +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2012, Empty weight: 6.700 kg Attachment suited for: Agricultural machines Auction item. Baler in working condition. Has been unused for 1 year. Sold as seen in photos. Minor repairs will be required. Will produce 9 000 bales. Feb Ehewg Apne D R Uopg

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 Feb Eh D Rsu R N Hys Ujpg - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 2013, Serial No. YH478, Control, Manufacturer: FANUC, Type Series 31i-MODEL B5, 4 axes (X/Y/Z/A), Travel X/Y/Z 700 x 400 x 330 mm, NC dividing head, 21-station tool turret, BT 30 tool holder, max. speed 10,000 rpm, chip conveyor, coolant system, central lubrication, cabinet, status lamp, Operating hours approx. 20,470 Fjbjwazcas Eh D R Uopg +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2003, operating hours: 2,845 h, power: 168 kW (228.42 HP), fuel type: diesel, working width: 6,000 mm, Applicable material: Grain Empty weight: 14.500 kg Technical inspection expiration date: 2025 Fpob Eh Djwg Aphj R Usg Auction item. Combine harvester in working condition. Sold together with 6 m width header. Header with new blades.

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: Fjb Eh Dou Egago R Uopg - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 2004, Serial No. 7041117, TX8i control system, 7 axes, 2x 10-station tool turrets, 2x C-axis, 1x Y-axis, driven tool stations, bar loading magazine, make FMB, type Turbo 10-72XT / 3,200 mm, max. bar diameter 72 mm, max. bar length 3,200 mm, chip conveyor, make KNOLL, type 240 S-1/50, coolant system - subject to prior sale - Fpjbeway S Hj Eh D R Ueg +++ Attention: Machine is part of an online auction! +++

Condition: used, power: 107 kW (145.48 HP), fuel type: diesel, Year of construction: 2001, operating hours: 14,934 h, Field of application: Construction Empty weight: 25.000 kg Track width: 60 cm Auction item. The excavator was in working condition. It has been unused for 3 years. Sold as seen in the photos. Fpebowg Apbj Eh D R Uog Without batteries.

Condition: good (used), Year of construction: 2008, Serial No. 1000(043), FANUC control, type Series 18i-TB, 7 axes, max. bar diameter 16 mm, max. turning length 205 mm, max. speed 6,000 rpm, main spindle (X/Z/Y/C), counter spindle (X/Z/C), 3 driven tool stations, small parts removal device, bar loading magazine, FMB, type minimag 18, coolant, oil +++ Attention: Machine is part of an online auction! +++ Fpjb Eoway Rvjh D R Uog

Condition: good (used), Year of construction: 2004, Serial No. 4990, control system, Tornos-Bechler FANUC, type PNC Deco, 5 axes, speed 7000 rpm, main spindle, counter spindle, driven tool 2, bar feeder, Tornos-Bechler, type 4990, year of manufacture 2003, wooden accessory cabinets, each with 2 doors, W 1,000 mm, H 1,800 mm, D 400 mm, contents: turning tools, driven tools, lathe accessories, loading magazine/power supply amplifier (Fanuc) defective Fpjb Eeway N Eeh D R Uog +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2006, Serial No. ST20G0030, control, manufacturer FANUC, type Series 31i-MODEL A, 6 axes, turning diameter max. 20 mm, turning length max. 200 mm, 5 driven tool stations, bar loading magazine, manufacturer FMB, type Turbo 3-26, bar length max. 3,200 mm, small parts dispensing device, chip conveyor, manufacturer FMB type ST20G, cooling lubricant system Fsb Eh Djway Izo R Uspg

Condition: good (used), Year of construction: 2006, Serial No. 0254(045), Fanuc control, Series 18i-TB, 7 axes, bar diameter 32 mm, headstock stroke 310 mm, main spindle with 4 axes X/Z/Y/C, counter spindle with 3 axes X/Z/C, bar feeder, FMB, type Turbo 3-36, max. bar length 3,600 mm, chip conveyor, Mayfran, oil coolant system - counter spindle guide requires overhaul Fjb Eh Doway Ibs R Uopg +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2011, Serial No. 0984(082), Fanuc Series 30ia control system, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 18 tool stations, including 5 driven tool stations, LNS Hydrobar Express 220 bar feeder, oil coolant system +++ Attention: Machine is part of an online auction! +++ Feb Eh Djway Hdo R Uspg

Condition: good (used), Year of construction: 2012, Serial No. 2465 (110), FANUC control, type Series 31i-MODEL B, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 21 tool stations, including 5 driven tool stations, bar magazine, make FMB, type Turbo 2-20, small parts dispensing system, chip conveyor, make LNS, type Turbo HB +++ Attention: Machine is part of an online auction! +++ Fpjb Eeway Dpoh D R Usg