Second-hand machinery for sale (2,399)

Condition: used, Hitachi ZX210LC-3 900mm Pads, CV, QH, Piped, Aux.Piping, Bucket, GPS Prepared (Trimble), Reverse Camera, A/C Dujbswc A Uvo E Az Rgot This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information go online.

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404605 + 2404606, A double package of two new robots will be auctioned! The robot will be delivered free of charge. TECHNICAL DETAILS Dusb Eewbqlmo Az Rgot Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke distance: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Djb Eswcn H Rs Az Rgout Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, operating hours: 9,978 h, load capacity: 3,000 kg, lifting height: 5,960 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Lift height: 5,960 mm Free lift: 1,650 mm Load capacity: 3,000 kg Load center: 500 mm Mast type: Triplex, free lift Tire type: SE Motor: Electric Fork carriage and forks Fork carriage width: 3,410 mm Fork positioner: 420 / 2,810 mm Forks: 130 mm × 45 mm × 1,370 mm MACHINE DETAILS Dueb Eswcq Scs Az Rgot Length: 3,060 mm Width: 2,540 mm Platform width: 1,350 mm Platform height: 440 mm Forklift height: 2,470 mm Mast height: 2,700 mm EQUIPMENT - Fork positioner

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 120850, Kaast VF-Mill Eco 1000 CNC machining center, Serial No. 120850, built in 2018 with chip conveyor and Siemens Sinumerik 828 D Basic control system Dsb Eewcnr He Az Rgeut available for auction online on May 7, 2025, starting at 6:00 PM. Please use the click-out function to participate.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Duebewc Sa Us E Az Rgjt Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service EQUIPMENT - LNS Super Hydrobar hydraulic bar loader (Swiss made) - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control

Condition: used, Year of construction: 2011, 2011 Hitachi ZX470LCH-3 High Reach Demolition Excavator, LCD BQC Boom Oil Quick Connect, 600mm Pads, CV, OQ80 QH, Piped, Aux. Piping, Reverse Camera, A/C, Removable Ballast Dsbewc A T Ee E Az Rgout This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information go online.

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404603, load capacity: 220 kg, arm reach: 2,701 mm, The robot will be provided free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Duob E Az Rewbqgwegst Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, Functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Feed (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Rated force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Feed (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of stationary tools (internal): 6 Diameter: 20 mm Number of stationary tools (external): 4 Tool shank size: 12 × 12 mm Number of rotating tools: 4 Collet type: ESX 16 MACHINE DETAILS Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA On-time: 85,620 h Program run: 27,896 h Dusb E Azowcprne Rgst EQUIPMENT - FMB Turbo 3-36 bar loader / 4200 / A, built in 2007 - Coolant tank with chip conveyor - Central lubrication system - Handheld control unit - Documentation available

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Duebowc Ryao E Az Rgot Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 27680044, Wafios BMZ-41 pipe bending machine, Mach. No. 27680044, year 2005 with loading magazine Dujb E Az Rjwcnqpoget Offered online on May 7, 2025, starting at 6:00 PM Follow the click-out function

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, turning length: 130 mm, spindle speed (max.): 12,000 rpm, spindle bore: 17 mm, bar passage: 13 mm, feed length X-axis: 30 mm, feed length Y-axis: 135 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D Configuration: Dual electrospindles, dual C-axis Main spindle and moving headstock Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Spindle speed: 12,000 rpm Spindle stroke: 130 mm Counter spindle Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Max. spindle speed: 12,000 rpm Max. workpiece length in the counter spindle: 95 mm Max. workpiece length with front ejection: 130 mm mm Tool carrier Horizontal travel (X-axis): 2 × 30 mm Vertical travel (Y-axis): 135 mm Tool holder: 1 tool carrier Outside stations: 8 stations, 12 × 12 mm Inside tools: 3, mounting bore Ø 16 mm Driven tools Number of driven tools: 3 Tool holder: ER 11 / ET 1-12 Speed (2 stations): 6,000 rpm Speed (1 station): 2,000 rpm Threading: Rigid threading Workpiece output: via counter spindle MACHINE DETAILS Machine dimensions (L × W × H): 1,830 × 950 × 1,717 mm Machine weight: 2,000 kg Cooling Coolant tank: 120 l Flow: 63 l/min Pressure: 2 bar Pneumatics Operating pressure: 6 bar Connection: Ø 10 mm Electrical data Supply voltage: 3 × 400 V / 50 Hz Max. power consumption: 21 kVA Cable cross-section: 10 mm² Fuses: 32 A, type AM Duob E Azswc R Uks Rgst Bar loader Standard diameter: Ø 2 – 16 mm Max. bar length: 3.2 m EQUIPMENT - FMB bar loader magazine Minimag type 3200 / 1205 A, built in 2002 - Diameter range for bar loader: Ø 2 – 13 mm - Workpiece output via counter spindle - Rigid thread cutting function - 3 driven tools - Dual C-axis with electric motors for main and counter spindle

Condition: good (used), Year of construction: 2002, operating hours: 5,600 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain TNC 426/30, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 18, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Control system: Heidenhain TNC 426/30 Spindle Spindle speed: max. 6,000 rpm Spindle motor power: 7.5 kW Tools Tool holder: SK 40 Tool positions: 18 MACHINE DETAILS Machine weight: 5,100 kg Spindle running time: 5,600 h Dsb Ejwcm U Tj Az Rgjut EQUIPMENT - Chip conveyor

Condition: new, Year of construction: 2024, Functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Dsb E Aowbqmdez Rgout Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Djb Ejwcn Eys Az Rgjut Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Year of construction: 2010, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 13483, No reserve price - guaranteed sale to the highest bidder! With new knives, screens, and wear-resistant plating, as well as overhauled electrical components! TECHNICAL DETAILS Motor power: 75 kW Dueb E Ajwcntdsz Rget Motor speed: 990 rpm Design: heavy-duty Inlet & Rotor Inlet opening: approx. 450 x 580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Number of stator knives: 2 rows Number of rotor knives: 3 x 3 EQUIPMENT - Solid enclosed rotor - Chunk mill, ideal for crushing solid parts - Hardox wear-resistant plating - new - Stator and rotor knives - new - Hydraulic unit - Temperature monitoring on the housing - Screen basket and 1 screen - new - Control cabinet with new cabling, approx. 6 m

Condition: used, Year of construction: 1996, MONFORTS KNC5 Cycle-Controlled Lathe Machine Data Year of Manufacture: 1996 Dimensions: 3000 x 1600 x 2000 mm (L/W/H) Control: MTC-K KNC 5 (1500) Machine as transport unit approx. 3,000 kg Working Area Center Distance 1,580 mm Swing Diameter over Bed/Cross Slide 500/290 mm Cross Slide Travel 265 mm Bed Width 360 mm Headstock Spindle Diameter at Front Bearing 100 mm Spindle Mount according to DIN 55027 Size 11 Spindle Bore 71 mm Spindle Inner Taper 80 mm Metric Main Drive Infinitely Variable AC Drive (100%/40% Duty Cycle) 11/16.5 kW Total Speed Range 3 – 2,800 rpm Gear stage I 3 – 280 rpm Gear stage II 13 – 1,120 rpm Gear stage III 50 – 2,800 rpm Max. torque 1,681 Nm Feed drives Three-phase servo drives with mechanical safety clutch Feed force longitudinal/transverse 11.3/11.3 kN Rapid traverse speed longitudinal/transverse 10/5 m/min Further information Pick-up date: End of June 2025 Duobsv Rr Ame E Az Rgst Material No.: 10342461 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 9809133, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 625 mm, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Type: 4-axis horizontal machining center Control: CNC Yasnac J300M Travel paths X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 625 mm Pallet system Pallet size: 500 × 500 mm Number of pallets: 2 Pallet indexing angle: 0.001° Tool changer Tool positions: 120 Tool interface: ISO 40 Spindle Spindle speed: 15,000 rpm Cooling: Internal cooling through spindle Feed rates Rapid traverse: 24 m/min Working feed: 1 – 10,000 mm/min MACHINE DETAILS Power supply: 380 V / 50 Hz / 67 kVA Machine weight: 11.5 t EQUIPMENT - Twin pallet system - Yasnac J300M CNC control system - Internal spindle cooling - Large tool changer (120 positions) - ISO 40 tool holder Dobjwc R E Nj E Az Rgeut

Condition: good (used), Year of construction: 2006, operating hours: 10,700 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Spindle & Tools Dujb Eswcm E Es Az Rget Spindle speed: max. 8,000 rpm Spindle motor power: 15 kW Tool holder: SK 40 Tool positions: 24 Control Control system: Heidenhain iTNC 530 Handwheel: HR 410 MACHINE DETAILS Spindle running time: 10,700 h EQUIPMENT - Chip conveyor

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 2882-0127-39609, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Deckel Dialog 112 Operating voltage: 3 x 400V Coolant system: Knoll 500 K-1, built in 1994 Dujb E Azewczz Uo Rgjt Information according to manufacturer - no guarantee Travel X / Y / Z: 1000 x 700 x 500 mm Spindle speed: 8,000 rpm Weight: 9.1 t Installation dimensions: 3.7 x 3.7 x 3.0 m

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h Dsb E Azewcnubj Rgjut EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: ready for operation (used), Year of construction: 2006, operating hours: 55,176 h, Functionality: fully functional, machine/vehicle number: A0230 A1231, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 1,500 / 115 mm Workpiece weight: 900 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 11.25 x 4.6 x 2.4 m Weight: 12 t Power consumption: 37 - 76 kW Connected load: 109 kVA Beam on-time: 24,314 h Laser on-time: 55,176 h CO2 consumption: 1 l/h N2 consumption: 6 l/h He consumption: 13 l/h Duebewck Ids E Az Rget Cutting gas consumption: 500 - 2,000 l/h

Condition: used, Year of construction: 1998, Cycle-Controlled Lathe KNC8S Machine Data Year of Manufacture: 1998 Dimensions: 6200 x 2110 x 1915 mm (L/W/H) Weight: Machine as transport unit approx. 7200 kg Control System: MTC-K KNC 8S (4000) Working Area Center Distance 3950 mm Swing Diameter over Bed 830 mm Swing Diameter over Cross Slide 540 mm Cross Slide Travel 450 mm Top Slide Displacement 250 mm Bed Width/Cross Slide Width 520/280 mm Deb E Aev Rr Agoz Rgsut Bed Slide Guide Length 600 mm Turning Tool Cross Section 32 x 32 mm Spindle Diameter at Front Bearing 180 mm Spindle Mount according to DIN 55027 Size 11 Material Capacity 130 mm Spindle inner taper: 140 mm Main drive: Continuously variable, AC motor Drive power (50/100% duty cycle) 50/37 kW Total speed range: 2-1600 rpm Gear stage: | 2- 225 rpm Gear stage II 5- 559 rpm Gear stage II 7- 900 rpm Gear stage IV 18-1600 rpm Max. spindle torque 8750 Nm Speed control 5-200% Load indicator up to 125% Feed drive Three-phase servo drive with mechanical safety clutch Feed force longitudinal/transverse 23880/11000 N Rapid speed longitudinal/transverse 5/4 m/min Further information Pick-up date: End of June 2025 Material No.: 10342451 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: H-H40611, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Big Plus spindle recently replaced + internal coolant supply TECHNICAL DETAILS Travel X / Y / Z: 1067 / 610 / 610 mm Spindle speeds: 12,000 rpm Rapid traverse X, Y, and Z: 30 m/min Power: more than 15 kW Tool changer: 24 positions, ISO 40 Dujb E Az Rewc R Dxeget Control: WinMax Ultimax 4 Table: 1270 x 610 mm Table load: max. 1350 kg EQUIPMENT - Chip conveyor - Oil cooler - Electronic handwheel - Internal coolant supply

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Specifications according to manufacturer - no guarantee Djb E Ajwczxtsz Rgjut Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm