Second-hand machinery for sale (2,405)

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 2882-0127-39609, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Deckel Dialog 112 Operating voltage: 3 x 400V Coolant system: Knoll 500 K-1, built in 1994 Information according to manufacturer - no guarantee Travel X / Y / Z: 1000 x 700 x 500 mm Djb Enaewczz Us Nrekl Spindle speed: 8,000 rpm Weight: 9.1 t Installation dimensions: 3.7 x 3.7 x 3.0 m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 55,176 h, Functionality: fully functional, machine/vehicle number: A0230 A1231, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 1,500 / 115 mm Workpiece weight: 900 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Dob Enaowck Ide Nrskl Aluminum: 15 mm MACHINE DETAILS Dimensions: 11.25 x 4.6 x 2.4 m Weight: 12 t Power consumption: 37 - 76 kW Connected load: 109 kVA Beam on-time: 24,314 h Laser on-time: 55,176 h CO2 consumption: 1 l/h N2 consumption: 6 l/h He consumption: 13 l/h Cutting gas consumption: 500 - 2,000 l/h

Condition: used, Year of construction: 1996, MONFORTS KNC5 Cycle-Controlled Lathe Machine Data Year of Manufacture: 1996 Dimensions: 3000 x 1600 x 2000 mm (L/W/H) Control: MTC-K KNC 5 (1500) Machine as transport unit approx. 3,000 kg Working Area Center Distance 1,580 mm Swing Diameter over Bed/Cross Slide 500/290 mm Cross Slide Travel 265 mm Bed Width 360 mm Headstock Spindle Diameter at Front Bearing 100 mm Spindle Mount according to DIN 55027 Size 11 Spindle Bore 71 mm Spindle Inner Taper 80 mm Metric Main Drive Infinitely Variable AC Drive (100%/40% Duty Cycle) 11/16.5 kW Total Speed Range 3 – 2,800 rpm Gear stage I 3 – 280 rpm Gear stage II 13 – 1,120 rpm Gear stage III 50 – 2,800 rpm Max. torque 1,681 Nm Feed drives Three-phase servo drives with mechanical safety clutch Feed force longitudinal/transverse 11.3/11.3 kN Dkjbov Rr Ame Ena Nrol Rapid traverse speed longitudinal/transverse 10/5 m/min Further information Pick-up date: End of June 2025 Material No.: 10342461 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s Dkob Enaswc Ucfe Nrjl MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! OVERVIEW - VAC-60a Gathering Tower - VAC-60c Gathering Tower - HOF-30 Stacker Drop Table Stitchliner 5500 Saddle Stitcher - ACF-30 Gathering and Folding Unit - SPF-30 Saddle Stitcher - HTS-30 Three-Side Trimmer TECHNICAL DETAILS Gathering Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Vacuum and Air Blower Gathering Tower Number of Stations: 6 Error Prevention: Misfeed, Double Feed, and Jam Detection Job Memory: 9 Memory Locations for Repeat Jobs Programs: Double Cycle (Non-Stop Operation), Interposer (1- and 2-Up), Booklet Program, Block Program, Selective Gathering Expandability: Up to 6 towers (36 stations) Format Range: Max. 148 - 500 × 120 - 350 mm Paper weight: 40 - 350 g/m² Loading capacity per station: 130 mm Production speed: up to 9,500 sets/h Power supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Double-sided collating Use: Towers can be used separately Weight per tower: 310 kg Stack lowering table Model: Horizon HOF-30 Function: Non-stop operation despite misfeed and double feed detection Gathering system Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30 + HTS-30 (Collating & Folding + Saddle Stitcher + Three-Side Trimmer) Format setting: Fully automatic Format templates: DIN formats and standard fold types Job memory: 200 memory locations for repeat jobs Stitching system Stitching options: Saddle stitch, block stitch, Corner stitching Stapling heads: 2 (optionally expandable to 4) Ring eyelet stitching: possible with ring eyelet stitching heads Dsb Eswcf D Hjna Nrskl Staple spacing: 60 - 150 mm Stapling thickness: max. 5 mm (3 mm with ring eyelet) Processing Infeed format: 210 - 500 × 148 - 350 mm Paper weight: 60 - 350 g/m² Processing thickness: 8 - 200 pages Speed: max. 5,500 cycles/h Trimming Untrimmed format: 140 - 350 × 103 - 250 mm Trimmed format: 120 - 312 × 95 - 230 mm Space requirements and weight Installation area: min. 5,709 × 3,240 mm Stitchliner weight: 2,120 kg Power supply: 400 V / 50 Hz Part of the video shows a Horizon ST40, which was replaced with a HOF 30.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Dob Enaswcqf Ne Nrokl Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Weight: 13,000 kg

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Specifications according to manufacturer - no guarantee Dkjb Ejwczxtsna Nrjl Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,485 h, Functionality: fully functional, machine/vehicle number: A0270 A2061, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning variation: ± 0.03 mm Laser Cutting head: with CoolLine Model: TruFlow 5000 Power: 250 - 5,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 20 mm Aluminum: 12 mm MACHINE DETAILS Dkeb Ena Njwckyaerol Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 33 - 72 kW Connected load: 109 kVA Beam on-time: 26,620 h Laser on-time: 49,485 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: used, Year of construction: 1998, Cycle-Controlled Lathe KNC8S Machine Data Year of Manufacture: 1998 Dimensions: 6200 x 2110 x 1915 mm (L/W/H) Weight: Machine as transport unit approx. 7200 kg Control System: MTC-K KNC 8S (4000) Working Area Center Distance 3950 mm Swing Diameter over Bed 830 mm Swing Diameter over Cross Slide 540 mm Cross Slide Travel 450 mm Top Slide Displacement 250 mm Bed Width/Cross Slide Width 520/280 mm Bed Slide Guide Length 600 mm Turning Tool Cross Section 32 x 32 mm Spindle Diameter at Front Bearing 180 mm Spindle Mount according to DIN 55027 Size 11 Material Capacity 130 mm Spindle inner taper: 140 mm Dkob Ena Nsv Rr Agjrjl Main drive: Continuously variable, AC motor Drive power (50/100% duty cycle) 50/37 kW Total speed range: 2-1600 rpm Gear stage: | 2- 225 rpm Gear stage II 5- 559 rpm Gear stage II 7- 900 rpm Gear stage IV 18-1600 rpm Max. spindle torque 8750 Nm Speed control 5-200% Load indicator up to 125% Feed drive Three-phase servo drive with mechanical safety clutch Feed force longitudinal/transverse 23880/11000 N Rapid speed longitudinal/transverse 5/4 m/min Further information Pick-up date: End of June 2025 Material No.: 10342451 The sale will be subject to the highest bid (plus premium and VAT) within an online auction. Please follow the link for further information.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 543 h, Functionality: fully functional, machine/vehicle number: 797298, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, One robot will be auctioned (built in 2014; operating time 543 hours; serial number 797298) Dkeb Eewc Uaqona Nrsl Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Four-pack with robots built in 2013 and an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 3815407, lifting height: 8,500 mm, load capacity: 16,000 kg, track width: 1,400 mm, rope length: 43,700 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Lift capacity: 16,000 kg Span: 6.5 m Lifting height: 8.50 m Lifting speed: 5.00 / 0.80 m/min Lift motor power: 15.00 / 2.50 kW Lift motor type: H72 Lift motor rating: 40 / 20% Chassis and drive Chassis type: OE-S 06 Travel drive type: SF25228313 Travel speed: 20.0 / 5.0 m/min Travel motor power: 1.25 / 0.32 kW Travel motor rating: 40 / 20% Protection and environmental data Protection class: IP55 Overload protection system: SLE3 Ambient temperature: -20 to +40 °C MACHINE DETAILS Connection voltage: 400 V Control voltage: 230 V Mains frequency: 50 Hz Mechanics and dimensions Wire rope / chain: 330 010 9 Load handling device: H252-4 Rope length: 43.70 m Track gauge / flange width: 1,400 mm Rail width: 50 mm Dksbowc Tt Ae Ena Nrsl Cab weight: 1,335 kg Crane bridge weight: 2,725 kg Length: 25.1 m Width: 7.4 m Height: 7.6 m Segmentation: 7.9 + 8.0 + 7.9 m EQUIPMENT - Wire rope or chain hoist - Load handling device H252-4 - SLE3 overload protection system - IP55 protection class - Two-stage lifting and travel operation - Long bridge length of 43.70 m - High load capacity up to 16,000 kg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 Dob Enowcqfpsa Nrekl MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: used, Year of construction: 2001, Gildemeister CTX-400 ST CNC Lathe. Serial No. 01160012621 (2001) Dkob Ena Nowakqtsrjl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,130 h, Functionality: fully functional, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Dkob Enaowckt Hs Nrol Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Beam on-time: 21,660 h Laser on-time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), Year of construction: 1984, Functionality: fully functional, total length: 1,400 mm, total width: 1,600 mm, total height: 2,200 mm, pressing force: 8 t, TECHNICAL DETAILS Tool holder: Euronorm Type EU 1 (441) Number of stations: 37 Capacity: max. 266,000 tablets/h Pressing data Pressing force: max. 80.0 kN Pre-press force: max. 20.0 kN Tablet thickness: max. 8.5 mm Dkobowbu Ufe Ena Nrel Tablet diameter: max. 25 mm MACHINE DETAILS Space requirement: 1,400 x 1,600 x 2,200 mm EQUIPMENT - Filling curves for 10 mm, 14 mm & 18 mm filling depth - Tableting tool not included.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797273 + 797258, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2013/2013; operating hours 2,154/14,355 h; serial numbers 797273/797258) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! Dkeb Enewc T Tcoa Nrjl TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Dkjb Enaowcqa Ho Nrjl Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, Year of construction: 2004, DMG DMC 1035V Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 28860011522 (2004), Table Size 1200 x 600mm, 24 Position ATC, Spindle Taper CAT40 Djb Ena Nswakmnjrekl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 50 h, Functionality: fully functional, Multihead Weigher + Flow Wrapper Machine has only 50 operating hours! TECHNICAL DETAILS Maximum number of bags: 50 bags/min Multihead Weigher CM-B10 Weighing Heads: 10 Weighing Range: 10 - 1,000 g Volume (max.): 1,300 ml Flow Wrapper E-250 Film Roll Diameter (max.): 450 mm Bag Width: 50 - 250 mm Bag Length (max.): 400 mm Current Setting – Bag Width: 155 mm Djbowbu Sqs Ena Nrekl Current Setting – Bag Length: 350 mm EQUIPMENT - Film holder for rolls up to 450 mm - Manual filling via central hopper - Ring-shaped weighing heads

Condition: ready for operation (used), Year of construction: 2010, operating hours: 2,239 h, Functionality: fully functional, machine/vehicle number: 796105 + 796713, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2006/2010; operating hours 147/2,239 hours; serial numbers 796105/796713) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Dsb Enajwc T Sxo Nrokl Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: used, Year of construction: 2007, DMG DMC 1035V Vertical Machining Centre. Serial No. 15425021864 (2007), Table Size 1200 x 560mm, 20 Position ATC, Spindle Taper CAT40 Dob Ena Nswakhxjrekl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, GF Agie CHarmilles Mikron VCE 600 Pro Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 1033618 (2011), Table Size 700 x 500mm, Spindle Taper CAT40, 24 Position ATC, 10,000rpm Spindle Dkjb Enjwai Drea Nrol Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, GF Agie CHarmilles Mikron VCE 1000 Pro Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 1033618 (2012), Table Size 1000 x 560mm, Spindle Taper CAT40, 24 Position ATC, 10,000rpm Spindle Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dobjwaiyte Ena Nrskl

Condition: used, Year of construction: 2013, Mazak Quick Turn Nexus 250-II MY CNC Lathe with Mazatrol Matrix Nexus 2 Control. Serial No. 247344 (2013), Tooleye, Parts Catcher, Tailstock, Swarf Conveyor, Kitagawa B120 3-Jaw Chuck, Cleanmist CM500 Filtration Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dkebjwaixio Ena Nrol

Condition: used, Year of construction: 2008, GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. TBC (2008), 10 Pallet Changer System, 30 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dkjb Eewaaf Tjna Nrol Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.