Second-hand machinery for sale (2,431)

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Dkelev Rcl Seraqbbol Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Frequency: 50 Hz

Condition: good (used), Year of construction: 2012, Functionality: fully functional, TECHNICAL DETAILS Area of application: bottling of water without CO₂ Installation location: mineral water factory in France Performance and capacity Max. performance: 32,000 bottles per hour Bottle size: 1.5 l Dkelraqev Iqpaobbsl Suitable mouth: 29/25 Capping system Capping machine: Zalkin Number of closing elements: 18 Capping holder: pick-and-place system Capping feed: yes Enclosure: yes Working direction Operating direction: clockwise (left to right)

Condition: ready for operation (used), Year of construction: 1971, Functionality: fully functional, center height: 240 mm, turning diameter over cross slide: 295 mm, turning diameter over bed slide: 490 mm, bed width: 360 mm, turning length: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Center height: 240 mm Dkelraqbov I Ukzjbol Turning diameter over slide: 295 mm Turning diameter over bed: 490 mm Bed width: 360 mm Cross slide travel: 240-250 mm Tailstock Quill diameter: 75 mm Quill travel: 200 mm Quill inner taper: Morse 5 Work spindle Outer taper: A.S.A. Camlock: D6" Inner taper: 60 mm Through bore: 51 mm Spindle speed: 14 speeds, 22-2,000 rpm Increment: 1.41 Gear ratios switchable under load: 4 Maximum torque at the work spindle: 175 mkg Cutting force at Ø 295 mm: 1,080 kp Feeds Number of feeds: 0.05 - 20 mm, 48 (increment 1.41) Feeds switchable under load: 4 MACHINE DETAILS Dimensions: 870 x 2,671 x 1,392 mm Weight: 2.6 t

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60% / 100% duty cycle): 19/15 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Djlrjv I T I Eoaqbbskl Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Toolholder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, standard: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Electrically operated disk tool turret - Internally cooled tool holders - Automatically pivoting tool carrier - 3-jaw chuck - Various tool holders

Condition: used, Year of construction: 2002, Functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 0.5, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Dolrsv I Tmuoaqbbjkl Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 109566, turning length: 480 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, spindle diameter: 100 mm, Machine with a large V12 turret for L- or M-sized tools and a hydraulic tailstock. TECHNICAL DETAILS Swivel diameter over bed: 530 mm Swivel diameter over longitudinal slide: 530 mm Swivel diameter over cross slide: 410 mm Number of controllable axes: 4 Turning length: 480 mm Turning diameter: 340 mm Speed: 4,500 rpm Spindle diameter: 100 mm Spindle Spindle diameter: 100 mm Spindle head type: JIS A2-6 Taper bore: Ø70 (2.75) x 1/10 mm Spindle bore: 62 mm Spindle speed: 38 - 4,500 rpm Longitudinal slide (Z-axis) Axis stroke: 500 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Axis travel: 280 mm [70 + 210] Feed: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Y-axis Axis travel: +70 to -50 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 10,000 mm/min Turret Type: V12 Number of tools: 12 (L or M tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm Dslraqbsv I Tkasbjkl C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200 °/min Tailstock & Motor Tailstock spindle diameter: 90 mm Tailstock spindle stroke: 120 mm Spindle drive motor: 15/11 kW (20 min/continuous operation) Longitudinal slide feed (Z-axis): 6 kW Cross slide feed (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Floor area: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Dkolraqev Rck Iobbjl Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, product length (max.): 1,200 mm, product length (min.): 800 mm, product width (max.): 1,000 mm, product width (min.): 600 mm, TECHNICAL DETAILS Components: Ocme palletizer and two Robopac Genesis stretch wrappers Area of application: Handling shrink containers Production capacity: max. 30,000 bottles per hour (depending on format) Palletizer PET 0.75L shrink wrappers: 2 x 32 PET 1.0L shrink wrappers: 3 x 2 PET 1.5L shrink wrappers: 3 x 2 / 3 x 4 Euro pallet format: 800 x 1,200 mm Chep Düsseldorfer pallet format: 600 x 800 mm Industrial pallet format: 1,000 x 1,200 mm Speed: 42,000 bottles per hour Feeding: Two lanes, low feed Wrapping machines (2x) Manufacturer: Robopac Model: Genesis Cube Doljv Iqa Sjraqbbjkl Year of manufacture: 2014 Additional functions: Film covering unit Processed pallet formats: Same as palletizer EQUIPMENT - Empty pallet magazine - Interlayer magazine - Interlayer inserter - Safety fence - Ocme Pegasus F450 palletizer - Two Robopac Genesis Cube wrapping machines - Ergonomic lifting device for film rolls

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 291127, wheel diameter: 275 mm, wheel width: 55 mm, controller manufacturer: Siemens, controller model: 840 C, module thread tooth pitch (max.): 6.5, module thread tooth pitch (min.): 1.5, Face Milling - Single Part Process - Continuous Process: - The workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are machined simultaneously in a single operation. - The cutter head has multiple cutter groups (not arranged in a circle) - Parallel tooth height - Conical tooth tip surface Single Part Process: - The workpiece is stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth is cut, the tool moves back out of the tooth, the workpiece continues to cut by one tooth width, and the next tooth is cut until all teeth are finished. - The cutter head has all cutters arranged on a circular path. - Conical tooth height - Parallel tooth tip surface The C28 can handle both gear and pinion. For the single part process, a C28 must be "prepared" - i.e., a direct measuring system + part gear brake, workpiece axis + license file for manufacturing single part processes. TECHNICAL DETAILS Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 Helix angle: 0-60° Number of teeth: 6-120 mm Gear ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of knife groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2400 rpm Ratio X / Y / Z: 3:1 Dkjlraqov I Ud Ijbbjl Spindle pitch per axis: 10 mm Movement range E / V-axis: -5° to 95° / ±7.5° Motor speed E / V-axis: 400 / 900 rpm Travel E/V-axis: 1800 / 1098 °/min E/V-axis gear ratio: 80:1 / 1:1 A/B-axis mounting diameter: 130 / 140 mm A/B-axis spindle speed: 667 / 345 rpm Permissible A/B-axis motor speed: 10,000 / 4,500 rpm A/B-axis gear ratio: 15:1 / 13:1 V1-axis travel: 85 - 225 mm V1-axis travel speed: 6 m/min V1-axis motor speed: 1800 rpm V1-axis spindle pitch: 5 mm U-axis travel: 112 - 258 mm U-axis travel speed: 0.6 m/min U-axis gear ratio: 4.3:1 U-axis motor speed: 3000 rpm U-axis spindle pitch: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 mm Power requirements: 3 x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, working width: 1,200 mm, saw blade diameter: 80 mm, working height: 910 mm, workpiece height (max.): 180 mm, rotational speed (max.): 3,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working width: 1,200 mm Working width with single belt: 70 mm Working thickness: 180 mm Working height: 910 mm Driver spacing: 420 mm Clearance between belt and column: 180 mm Adjustable feed speed: 3 - 18 m/min Adjustable speed of the movable column: 2 m/min Electric spindle Speed: 3,000 rpm Power: 1 - 13 kW Shaft diameter and length: 40 x 55/95/118 mm Saw blade bore diameter for scoring saw and hogger: 60-80 mm Belt drive Speed: 6,000 rpm Power: 2.2 - 9.2 kW Spindle diameter and length: 40 x 55/95 x 118 mm mm Djlev I S Udoraqbbjkl EQUIPMENT - Saw unit - Milling unit - Soundproof enclosures

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 172, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Weight: 1 t Motor power: 6.5 kW Further information according to the manufacturer - without guarantee Front roller spacing continuously adjustable: 200 - 1000 mm Number of driven rollers: 3 Drive type: Electric motors Maximum speed: 22 rpm Roller height: 300 mm Torque: 1,600 Nm Works on both sides: rolling at the front, bending at the rear Length: 1.6 m Width: 1.3 m Height: 1.4 m Delraqev Nhimebbekl Weight: 1.2 t

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 13676, number of slots in tool magazine: 20, Equipment: chip conveyor, Due to space requirements, the machine is being auctioned without a reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to pick up the machine by March 31, 2025! TECHNICAL DETAILS 4th axis: Dividing head mechanically functional, however, the circuit board needs to be replaced Tool changer: 20-station Chip conveyor: Available Filter system: Paper belt filter Operating voltage: 360 - 480 V Further technical data according to the manufacturer - without guarantee X-travel: 1,270 mm Y-travel: 508 mm Z-travel: 635 mm Spindle speed: 8,000 rpm Control: CNC Haas Table length: 1,321 mm Table width: 457 mm Spindle nose to table: 107 - 742 mm Djlraov Ni A Ijqbbjkl Workpiece weight: 793 kg T-slot width: 16 mm T-slot spacing: 80 Number of T-slots: 5 Tool changer: 20 Tool diameter: 89 mm Tool weight: 5.4 kg Spindle taper: CAT 40 Dimensions: 2.8 x 3.0 x 3.2 m Weight: 5.5 t

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: ZPR/M/2016/000016, No reserve price - guaranteed sale at the highest bid! Description: The machine sorts fruit by diameter and color depending on the selected program option. The roller discharge system discharges fruit sideways onto one of six collection chutes. TECHNICAL DETAILS Capacity: 1.5 - 2 t/h Installation Dimensions: 8.8 x 8.4 m Electrical Connection: Electrical connection only at the bin tipper; all other components are modular along the line. Area of Application: Small and medium-sized farms Function: Sorts fruit by diameter and color, e.g., apples Ejection System: Roller discharge discharges fruit sideways onto six collection chutes. Additional Equipment: Automatic bin tipper or roller conveyor. Operation: Electronic, user-friendly control panel. Delrov Ra Uqjaqbbekl Other: Connecting conveyors can be removed to allow complete packing on all chutes. EQUIPMENT - Automatic container tipper - 1 unit - Conveyor with infeed belt - 1 unit - Inspection roller conveyor - 1 unit - Variable-speed "V" conveyor - 1 unit - MONO-type sorting machine - 1 unit - Packing table - 6 units - Scales - 5 units - Conveyor to filler PTO-1 L = 2.6 m - 1 unit - Conveyor to filler PTO-1 L = 2.0 m - 1 unit - Automatic container filling system - 2 units

Condition: like new (used), Year of construction: 2018, operating hours: 397 h, Functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Hartford Plus 3, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 12, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 620 mm Y-axis: 420 mm Z-axis: 450 mm Spindle nose to table: 100 - 550 mm Control: Hartford Plus 3 Table size: 620 x 420 mm Max. table load: 300 kg Spindle mount: 40 INT Dkjlrev D I Apsaqbbsl Spindle speed: 12,000 rpm Tool slots: 12 pieces MACHINE DETAILS Part counter: 662 pieces Operating time: 397 h Connected load: 15 kVA Weight: 3,919 kg

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90571, working width: 3,200 mm, No reserve price - guaranteed sale to the highest bidder! The machine had been out of service for 8 years and required maintenance (cleaning, lubrication, greasing, etc.) before being put into operation. Accordingly, the machine had been in production for 17 years. TECHNICAL DETAILS Working width: 220 - 3,200 mm Drilling units Floor units: 6 units with 2 drilling heads each (2 x 11 spindles) Spindles per floor unit: 22 Total number of floor spindles: 132 Upper units: 2 units with 2 drilling heads each (2 x 11 spindles) Spindles per upper unit: 22 Total number of upper spindles: 44 Horizontal units: 2 units Clamps and removal Upper pressure clamps: 4 units Motorized endless screws for chip removal: 2 units Dkolrajv Uqaxjqbbol MACHINE DETAILS Power: 37.3 kW Voltage: 380 V Current: 7 A Frequency: 50 Hz EQUIPMENT - Electronic programming device RT 483 - Each drilling head is rotatable - Through-feed motorized Conveyor belts with adjustable speed - Extra unit for automatic feeding of small panels

Condition: as good as new (ex-display), Year of construction: 2019, Functionality: fully functional, temperature: 1,300 °C, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price - guaranteed sale to the highest bidder! HIGHLIGHTS - Complete end-to-end solution including washing station and sintering (sintering tank not included) - Machine has been barely used - Suitable for printing parts made of 17-4 PH stainless steel, D2/A2/H13 tool steel, and copper TECHNICAL DETAILS Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Build volume: 300 x 220 x 180 mm Layer thickness: 50 µm and 125 µm after sintering Maximum part size: 250 x 183 x 150 mm, 10 kg Software: Eiger Cloud Sintering Sintering capacity: 3,020 cm³ (184 in³) Sintering surface area: 348 cm³ Sintering time: 26 hours Sintering gas types: Argon, Argon-hydrogen mixture Maximum temperature: 1,3000 °C Washing Washing capacity: 18,356 cm³ Washing volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, or Tergo metal cleaning fluid MACHINE DETAILS Dimensions (printer): 575 x 467 x 1,120 mm Weight (printer): 75 kg Dimensions (wash unit): 609 x 685 x 1,067 mm Weight (wash unit): 136 kg Dimensions (sinter): 1,270 x 510 x 720 mm Weight (sinter): 136 kg EQUIPMENT - Printer + Wash-1 unit + Sinter-1 unit (without sinter core unit) - Two-nozzle printing system - Heated print chamber Dolraqov Hpi Aebbokl - Vacuum-sealed print bed - Automatic leveling

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 86004811, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Dkelev Nhf Ujraqbbol TECHNICAL DETAILS Belt filter system Manufacturer: Knoll Type: HF150 Year of manufacture: 1994 Filtration Filter type: Candle filter Discharge conveyor belt Manufacturer: DTW Dimensions: 400 x 2,500 mm MACHINE DETAILS Operating voltage: 380 V, 50 Hz Motor power: 4.68 kW Heating power: 36 kW

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, table width: 750 mm, table length: 425 mm, TECHNICAL DETAILS Dkslou U Dyasraqbbjl Feed in longitudinal direction (X-axis): 560 mm Feed in transverse direction (Y-axis): 500 mm Feed in vertical direction (Z-axis): 400 mm Table dimensions: 750 x 425 mm Control: Heidenhain Drill head Drill head holder: ISO40 Speeds: max. 4,000 rpm MACHINE DETAILS Length (L-R): 2,430 mm Depth (V-H): 2,100 mm Height: 1,855 mm Weight: 2 tons

Condition: new, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 7525-4237-FA, arm reach: 2,500 mm, TECHNICAL DETAILS Single-point repeatability: 0.020 mm Volumetric accuracy: ± 0.029 mm Range: 2.5 m Software Software: Polyworks Metrology Suite 2019 IR8 Version: 64-bit Jan 2020 Computer Model: DELL Precision 7740 Processor: INTEL Core i7 Memory: 16 GB RAM Hard Drive: 500 GB HDD Dkelrov I Uxxjaqbbol Operating System: Windows 10 Pro 64-bit MACHINE DETAILS Arm weight: 8.0 kg Operating temperature: 0 °C – 50 °C Storage temperature: -30 °C – 70 °C Relative humidity: 10% – 90% (non-condensing) Operating altitude: 0 – 2,000 m EQUIPMENT - Probe 15 mm - 6 mm probe - 3 mm probe - Magnetic base - Calibration bar - Calibration sphere - Carrying case

Condition: ready for operation (used), Year of construction: 1998, operating hours: 4,197 h, Functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, No reserve price - guaranteed sale to the highest bidder! Dkjlraqbev R Epgebel TECHNICAL DETAILS Saw blade diameter (without loader): 80 – 850 mm Saw blade diameter (with loader): 250 – 450 mm Bore diameter (from): 10 mm Saw blade magazine: up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth shapes, including special profiles Grinding process sequence Step 1: After starting, the vacuum gripper removes the top saw blade from magazine 1. It is transferred to the Woodtronic NC4 and the cover is opened. Step 2: The loader returns. The Woodtronic NC4 is closed and the grinding program starts. The loader removes the spacer ring from magazine 1 and transfers it to magazine 2. Waiting position. Step 3: After the grinding process and the Woodtronic is opened, the loader removes the ground saw blade and transfers it to magazine 2. Process repetition Steps 1 to 3 are repeated until the grinding process is complete. Pre-programming possible: Grinding continues uninterrupted, even while programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth shape: manual entry required EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide circular saw blades

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 176, pressing force: 10 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Dkelev Na A Eeraqbbjl TECHNICAL DETAILS Pressing force: 100 kN Year of conversion: 2018 Overtravel: 12 mm Overtravel time: 80 ms

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101742, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Dkslov Naw Njraqbbol Weight: approx. 3.7 t

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1108262, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Equipment: Chip conveyor Dkslraqov Natdebbol Further information according to the manufacturer - without guarantee Travel X / Y / Z: 406 x 305 x 254 mm Distance spindle to table: 356 mm Spindle speed: 10,000 rpm Tool taper: #40 Table dimensions: 730 (914) x 305 mm T-slot spacing: 110 mm T-slot width: 16 mm Number of slots: 3 Table load: max. 227 kg Tool diameter: 89 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 10 Machine dimensions: approx. 2.3 x 2.3 x 2.7 m Weight: approx. 1.6 t

Year of construction: 2011, Condition: ready for operation (used), Functionality: fully functional, saw blade diameter: 550 mm, conveyor belt length: 300 mm, conveyor belt width: 6,000 mm, machine/vehicle number: 0112613,, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Sawblade diameter: 550 mm Roller conveyor: 300 x 6,000 mm Material feed Feed: automatic Material clamping: present EQUIPMENT - Automatic feed - Material clamping - Control system - Chip extraction system - Two light barriers Further information according to the manufacturer - without guarantee Machine length: approx. 17.2 m Sawblade speed: approx. 2,800 rpm U-axis travel: approx. 7.4 m Dkjlraqjv I U R Iobbol Sawblade swivel range: -45° to +45° Maximum loading length: 7,200 mm

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Dkelrjv I Uwusaqbbsl Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm