Second-hand machinery for sale (2,399)

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Duslirsv Hmdqs Tq Tst Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s Dolir Tqjvi Igfs Tout A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Duelsv Hrixoir Tq Tst Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT - Machine completely repaired and checked + painting work - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 09 Clad Degassing System, Dual, Weight in kg: 5,400; Attention. NH bearing - seaworthy packed Duslievwlhpor Tq Tet

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Duslir Tqeuwrz Te Tet Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: ready for operation (used), Year of construction: 1998, operating hours: 56,210 h, Functionality: fully functional, machine/vehicle number: 888138, pressing force: 234 t, travel distance X-axis: 600 mm, working length: 3,060 mm, stroke distance: 365 mm, TECHNICAL DETAILS Pressing force: 2,300 kN Working length: 3,060 mm Max. stroke: 365 mm Max. operating pressure: 305 bar Follow-up time: 53 ms Safety distance: 84 mm Working area Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Inclined position of pressure beam: ± 10 mm Free column passage: 2,690 mm Thrust: 410 mm Table width: 200 mm Working height at 100 mm tool usable height: 1,050 mm Speeds Y-axis rapid traverse: 200 mm/s Y-axis working speed: 11 mm/s Y-axis retraction: 135 mm/s X-axis: 500 mm/s R-axis: 300 mm/s Accuracy Position deviation Y-axis: 0.01 mm Position deviation X-axis: 0.04 mm Position deviation R-axis: 0.08 mm Travel range stop area Y-axis stroke: 365 mm Travel range X-axis: 600 mm Max. stop range in X: 860 mm Travel range R-axis: 250 mm MACHINE DETAILS Length: 3,660 mm Width: 2,310 mm Height: 3,095 mm Weight: 18,210 kg Operating hours: 56,210 h Electrical supply Voltage: 3x 400 V Delev E E Raoir Tq Tjut Nominal current: 60.5 A Frequency: 50 Hz Connection power: 37.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Suspensions and transport Suspension holes: diameter 80 mm Distance to top edge: 150 mm Thickness of side plate: 80 mm Transport weight: 17,700 kg

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Dslir Tqev E Rkro Tsut Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 2008, operating hours: 6,854 h, Functionality: fully functional, machine/vehicle number: 135391, turning length: 1,000 mm, turning diameter: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 45 rpm, tool mount: 40 mm, swivel angle C-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! Lathe for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guideways. The high-torque drives ensure high precision and long-term accuracy. TECHNICAL DETAILS Control: OKUMA OSP-P200LA Turning diameter: 50 mm Tailstock for turning length: approx. 1,000 mm Self-centering steady rest, clamping diameter range: 4 - 64 mm Steady rest holder: fixed Door automation: LB300EX-C1000 Spindle data C-axis: 360 / 0.001° Power: 7 kW Torque: 23.7 Nm Speed range: 45 - 6,000 rpm Tool drive Dslov Evq Rsir Tq Teut Tool holder: 12 positions, DIN 69880 system, diameter 40 x 63 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6,000 rpm MACHINE DETAILS Dimensions (L x W x H): 3,620 x 2,057 x 2,056 mm Weight: 6,150 kg Connection voltage: 400 V, 3-phase, 50 Hz Power consumption: 41.3 kVA Machine on-time: 29,556 h Program run time: 6,854 h Spindle time: 6,696 h

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, laser power: 3,200 W, workpiece weight (max.): 500 kg, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis: 2,500 mm Y-axis: 1,250 mm Z-axis: 115 mm Control: TRUMPF CNC control, based on Siemens Sinumerik 840D Workpiece weight: 500 kg Laser Laser source: TRUMPF TLF 3200 Power: 3.2 kW (3,200 W) Cutting head: 7.5 inches Movement & accuracy Speed parallel to axis: 60 m/min Speed simultaneous: 85 m/min Smallest programmable increment: 0.01 mm Positioning accuracy: ± 0.1 mm Repeatability: ± 0.03 mm MACHINE DETAILS Length: 7,100 mm Dslirovy Ewco Tq Tsut Width: 5,900 mm Height: 2,000 mm Machine weight: 7,900 kg

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual, Weight in kg: 13,330; Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport. Djlirovwlg So Tq Tout

Condition: good (used), Year of construction: 2008, operating hours: 10,180 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, TECHNICAL DETAILS Electrical specifications: Operating voltage: 400 V Frequency: 50 Hz Connection: 20 kVA Control system: Control: FANUC mill i Spindle: Max. Spindle speed: 12,000 rpm Traverse paths: X-axis travel: 1,020 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Rapid traverse: 40 m/min Table: Table dimensions: 1,200 x 500 mm Max. Load capacity: 500 kg Tool holder and tool change: Tool holder: BT40 Tool changer: 30-fold Machine data: Year of construction: 2008 Machine weight: 6,850 kg Duoliou N If Eer Tq Tst Dimensions (L/W/H): 2,470 x 2,540 x 2,750 mm Tool parameters: Normal tool - Max. Tool diameter: 88 mm Standard tool - Max. tool length: 280 mm Tool length: 280 mm Standard tool - Max. Tool weight: 7 kg Large tool - Max. Tool diameter: 125 mm Large tool - Max. Tool length: 280 mm Large tool - Max. Tool weight: 7 kg Tool change time: Tool change time (chip to chip): 5 s Cooling and handling systems: IKZ: Yes (8 bar) Electric handwheel: Yes Chip conveyor: Yes Operating hours: Switch-on hours: 42,230 h Spindle hours: 10,180 h The machines were only operated in a single shift and only approx. 50% of the time.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,934 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, water pressure: 3,600 bar, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar EQUIPMENT Duelisvfm T Njr Tq Tet - Two cutting heads for simultaneous processing - Drilling head for piercing holes 2 mm (e.g. MAX plates) - Glue gun for small parts - desludging unit in BIG Pack - Bysoft6 software

Condition: ready for operation (used), Year of construction: 2000, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: 21003600, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, controller model: BWO 910, operating hours of spindle: 200 h, Spindle was rebuilt in 2024 and has only 200 operating hours! Reason for returning the machine: space required for new purchase. TECHNICAL DETAILS X-axis travel: 1,500 mm Y-axis travel: 1,500 mm Z-axis travel: 650 mm (with 130 mm tool length) Table size: 1,500 x 1,500 m Table height: 870 mm Control model: BWO 910 Spindle & cooling Spindle type: High-speed milling spindle HSD Spindle conversion: September 2024 to ES 951 (air-cooled, value: €14,000) Speed (max.): 24,000 rpm Spindle operating hours: 200 h Duelev Hnn Deir Tq Tst Tool system Tool holder: ISO 30 + special fastening bolts Number of slots in the tool magazine: 20 MACHINE DETAILS Total length: 5,640 mm Total width: 2,570 mm Total height: 4,200 mm Total weight: 8,500 kg EQUIPMENT - Surface table in tandem version with separate clamping circuits - Drum tool changer:    - X-axis: fixed at X-zero, 4 places for angle heads and special tools    - Y-axis: moving, 10 places, max. D 60 - Milling unit for flexible machining options

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PRJ037887, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, rotational speed (max.): 13,000 rpm, distance table to spindle center: 740 mm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Machining center including dividing head TECHNICAL DETAILS X-axis (longitudinal stroke): 600 mm Y-axis (transverse stroke): 400 mm Z-axis (vertical stroke): 600 mm Distance spindle-table (min./max.): 140/740 mm (with spacer, item special option 2) Control: Heidenhain iTNC 530 with smarT.NC Machine table Table width: 750 mm T-slots according to DIN 650 (width/distance): 14 x 80 / 100 mm Middle T-slot as guide slot: 14 H7 mm Table load: max. 500 kg Main spindle drive Spindle type: Conventional main spindle with 4-way fixed-loose bearing and lifetime grease lubrication Bearing seal: Sealing air seal with additional splash ring Tool holder: SK 40 (according to DIN 69871) Pull bolt: DIN 69872-19 Blown air through the spindle center: available Spindle drive motor Type: 4-pole, frequency-controlled three-phase asynchronous motor with external air cooling (maintenance-free) Djlir Tov Evpmsq Teut Drive power (25% duty cycle): max. 13 kW Torque (25% duty cycle): max. 55 Nm Speed range continuously variable (25% duty cycle): max. 13,000 rpm Tool magazine Magazine type: plate Magazine positions: 24 Tool diameter (fully loaded): max. 100 mm Tool diameter (with free adjacent positions): max. 200 mm Tool length (at Ø 25): max. 350 mm Tool weight: max. 4 kg Tool change time: approx. 1.9 s Chip-to-chip time: approx. 3.9 s MACHINE DETAILS Air pressure: min. 6 bar Hydraulics: max. 6.8 l/min at 140 bar Connection power: 20 kVA Width: approx. 2,700 mm Depth: approx. 1,780 mm Height: approx. 2,785 mm Machine as transport unit: approx. 3,500 kg EQUIPMENT - Chip conveyor - Coolant -

Condition: ready for operation (used), Year of construction: 2006, operating hours: 29,231 h, Functionality: fully functional, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Max. workpiece size: 3,000 x 1,500 mm X-axis (longitudinal movement): 3,000 mm Y-axis (transverse movement): 1,500 mm Z-axis (height adjustment): 115 mm Control type: Siemens Sinumerik 840D Laser Type: TLF 6000 Power: 6.0 kW (6,000 W) Wavelength: 10.6 µm Cutting thickness steel: 25 mm Cutting thickness: stainless steel: 25 mm Cutting thickness aluminum: 15 mm Movement & speed Parallel travel speed: 200 m/min Simultaneous travel speed: 300 m/min Smallest programmable increment: 0.001 mm Positioning accuracy: ± 0.1 mm Repeat accuracy: ± 0.03 mm MACHINE DETAILS Length: 11,250 mm Width: 4,600 mm Height: 2,400 mm Machine weight: 12 t Dusliovy Euzer Tq Tjt Laser switch-on time: 29,231 h Cutting time: 11,298 h

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual; Weight in kg: 13,330; Djlirevwlfhe Tq Tjut Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control Djlir Tov E Ibnjq Tjut - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: ready for operation (used), Year of construction: 2000, operating hours: 8,463 h, Functionality: fully functional, machine/vehicle number: 11045522244, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 18,000 rpm, number of slots in tool magazine: 30, Equipment: documentation/manual, TECHNICAL DETAILS Control: Heidenhain TNC 430 (MillPlus) Number of axes: 3 Travel X / Y / Z: 500 / 420 / 380 mm Clamping surface: 500 x 380mm Spindle speed: 18,000 rpm Spindle power: 13 kW Spindle mount: SK40 Tool holder: 30 pieces MACHINE DETAILS Dimensions: 3,360 x 2,400 x 2,500 mm Machine weight: 6,000 kg Duslir Tsv A Ui Heq Tet Documentation: available

Condition: ready for operation (used), Year of construction: 2010, operating hours: 44,092 h, Functionality: fully functional, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Regular maintenance by Bystronic UK TECHNICAL DETAILS Max. sheet size: 3,000 x 1,500 mm Control type: ByVision CNC02 Laser power Power: 4.4 kW (4,400 W) MACHINE DETAILS Switched on: 102,182 h Cutting time: 44,092 h Turbo blower hours: 2,987 h New turbo installed: end of 2023 Output coupler: 30,072 h Vacuum pump: 12,346 h EQUIPMENT - ByVision CNC02 control with CutControl - Bypos automatic focus adjustment - Torit dust collector for efficient extraction - Tools and accessories Duelirovy Erts Tq Tjt - 2 cutting heads

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 08 Clad Sintering System, Single, Weight in kg: 9,780 Attention. NH bearings - seaworthy packed, appropriately certified; properly decommissioned, according to applicable protocols, professionally dismantled, ready for container transport. Duelir Tqjvwlddo Tet

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Dslir Tqjv E Hz He Tjut Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: ready for operation (used), Year of construction: 2006, operating hours: 59,480 h, Functionality: fully functional, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, Predecessor model of the more popular TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice a year by Trumpf UK) Last service: January 2019 New vacuum pump installed: May 28, 2019 Djlievy Ehzsr Tq Tsut Working area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotation axis): +100° C-axis (rotation axis): n x 360° Laser source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Available (for programming support) Control & software CNC control: Siemens 840D with 3.5" floppy disk drive Network connection: Available (including analog modem for Remote maintenance) Software: ToPs 100 with nesting module & IGES Translator + ToPs 800 with fixture construction & 3D IGES Translator MACHINE DETAILS Beam switched on: 14,922 h Laser switched on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed water cooling with air circuit - 5” high-pressure cutting optics - Set-up device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary work table

Year of construction: 2020, Condition: good (used), Functionality: fully functional, The article consists of two OFC 05 Horizontal OVD Clad Deposition System, Dual Spindle; Weight in kg: 13,700; Attention. NH bearings - seaworthy packed, suitably certified; properly decommissioned, according to the applicable protocols, professionally dismantled, ready for container transport. Dolir Tqsvwlbcj Tout

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Dslirov E Hk Io Tq Teut Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Year of construction: 2022, Condition: good (used), Functionality: fully functional, NBG Hall - assembled, weight in kg: 3,750 Duslisvwliasr Tq Tet Documentation available, very good condition;