Second-hand machinery for sale (2,372)

Condition: excellent (used), Year of construction: 2004, operating hours: 12,464 h, Functionality: fully functional, machine/vehicle number: 29100003782, travel distance X-axis: 640 mm, controller manufacturer: Siemens, controller model: Sinumerik 810 D, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, Reconditioned by technical experts for used DMG-Mori machining centers. TECHNICAL DETAILS Travel X / Y / Z: 640 / 600 / 500 mm table: 850 x 600 mm Table load: max. 600 kg Speed: 18,000 rpm Dsb Est Di Nto U S Rqout Rapid traverse X / Y / Z: 70 / 40 / 40 m/min Tool changer: 30 positions, ISO 40 Control: Siemens 810 D MACHINE DETAILS Internal cooling: 40 bar EQUIPMENT - Tool measuring device

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26489, Year of construction: 2014, operating hours: 20,875 h, load capacity: 1,600 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electrical devices (min. 75% capacity) - Serviceable tires according to FEM-4.004 (min. 80% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers Djb E U Sovn R D Ro Rqeut TECHNICAL DETAILS Drive type: Electric Load capacity: 1,600 kg Lifting height: 4,500 mm Load center: 500 mm Operating hours: 20,875 h Mast type: Triplex Fork length: 1,150 mm Height: 2,100 mm Own weight: approx. 3,000 kg Battery capacity (C5): 75% (protocol is enclosed with delivery) Tires Front: solid rubber, 80% Rear: solid rubber, 80% EQUIPMENT - Side shift - Fork adjuster - Work lights - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26291, Year of construction: 2018, operating hours: 17,369 h, load capacity: 1,500 kg, lifting height: 5,200 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electric devices (81% capacity) - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,500 kg Lifting height: 5,200 mm Load center: 500 mm Operating hours: 17,369 h Deb E Uevn R Ats S Rqsut Mast type: Triplex Fork length: 1,150 mm Height: 2,400 mm Own weight: 3,018 kg Battery capacity (C5): 81% (protocol is included with delivery) Front tires: solid rubber Rear tires: solid rubber EQUIPMENT - Side shifter - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 27744, Year of construction: 2019, operating hours: 7,036 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, Equipment: sideshift, Checked and guaranteed by the seller: Deb E Usvn Rq Rj S Rqjut - Full functionality according to FEM-4.004 - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Gas (LPG) Load capacity: 2,500 kg Lifting height: 4,700 mm Operating hours: 7,036h Mast type: Triplex Fork length: 1,150 mm Height: 2,270 mm Own weight: 3,965 kg Tires Front: solid rubber Rear: solid rubber

Condition: repair required (used), Year of construction: 2008, operating hours: 9,000 h, Functionality: not functional, machine/vehicle number: R65EW1851, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 4,200 rpm, No reserve price - guaranteed sale at the highest bid! Nimble and precise machine with lots of accessories, driven tools and collet chuck with various collets, including square and hexagon. Condition: Used machine, previously used in Thailand. Due to the climatic conditions on site, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (clamping flange) - tailstock center: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel ranges Travel path X: 210 mm Travel path Z: 610 mm Main spindle Spindle connection according to DIN 55026: KK 6 Outer spindle diameter in the front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. passage: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% ED): 15 / 18 kW Speed range (infinitely adjustable): 60 - 4,200 rpm Max. torque: 192 Nm Djb E U S Revrz A Seqout Tailstock Automatic tailstock: hydraulically operated Tailstock travel: 500 mm Max. tailstock pressure force: 8,000 N Travel speed: 20 m/min Inner taper of the tailstock quill: MK 4 Feed drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position spread (according to VDI 3441 in X/Z): 3 / 5 µm C-axis (spindle 1 and 2) Resolution of the rotary axis: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow Dujb E U Sjvpgtqo Rqet

Condition: good (used), Year of construction: 2005, operating hours: 60,000 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, workpiece width (max.): 1,050 mm, No reserve price - guaranteed sale at the highest bid! Condition: Machine has been resealed at the basin TECHNICAL DETAILS Max. workpiece dimensions (W x D x H): 1,050 mm x 800 mm x 295 mm Max. workpiece weight: 1,500 kg Max. workpiece weight: 780 x 630 kg Table dimensions: 780 x 630 kg Axes movement range (X, Y, Z): 500 mm x 350 mm x 300 mm Axis speed (rapid traverse): 0.1 m/s Wire diameter: 0.1 - 0.3 mm Wire tension: 0.1 - 0.25 N Bevel cut unit axis travel range (U x V): ±21° x ±21° Detection method for each axis position (X, Y, U, V): Linear scale Djbsvphzvo E U S Rqjut Dielectric liquid tank Working volume: 750 l Filter flow rate: 60 l/min Filtration accuracy: 3 μm Filter element: Paper filter x 2 Dielectric conductivity (range): 0.5 - 30 x 10^4 Ωcm External dimensions (W x D x H): 880 mm x 2,070 mm x 1,565 mm Weight (dry): 400 kg MACHINE DETAILS External dimensions (W x D x H): 2,210 mm x 2,873 mm x 2,150 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, saw band length: 5,080 mm, saw band width: 80 mm, TECHNICAL DETAILS Pulley diameter: 850 mm Bandsaw thickness: 0.8 / 1 mm Band saw blade width: 80 mm Bandsaw blade length: 5010 - 5080 mm Duob E Ust H N Ibo S Rqjt Cutting depth: 305 mm Opening of the saw to the fence: max. 305 mm Opening of the saw to the feed rollers: max. 230 mm Feed speeds: 5 - 60 m/min Table height: 900 mm MACHINE DETAILS Weight: 1500 kg Dimensions: 1750 x 850 x 2200 mm Main motor: 15 kW Cleaning fluid capacity: 3 l

Year of construction: 2004, Condition: good (used), Functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. Deb E U Sel Eykgj Rqeut feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: reconditioned (used), Year of construction: 1990, Functionality: fully functional, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS model Type: CM S 3370 Specification Maximum product dimensions: Maximum product height: 1,500 mm (measured at the bottom of the hook) Maximum diameter: Ø 1,200 mm Maximum weight: 700 kg Equipment Load hook: 2x Turbines: 3x Ø 330 mm, 6 blades Turbine speed: 1,450 // 950 rpm Turbine output: 5.7 kW // 4.1 kW (Dahlander motors) Mechanical control Hook displacement: manual Hook infeed: mechanical Door operation: mechanical Dsb Esu Iy Ipj U S Rqjut Mechanical overhaul Motors and drives completely overhauled and fitted with new seals Cab overhauled with sheet metal and doors, prepared for manganese steel armor plates (hook iron available); with original rubber coating as standard, optionally with manganese steel armoring Augers replaced and fitted with HARDOX augers Auger bearings replaced Radiant elevator fitted with new elevator belt, return sprockets and bearings Chain drives and sprockets replaced Hook feed system modernized Hook drive system completely overhauled Compressed air supply replaced Compressed air cylinders and valves renewed/overhauled Turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical overhaul Turbine control: 3x turbines Ø 330 mm with 2 speed controls (Dahlander motors) The electric motors were overhauled, rewired and tested; motor brand: Siemens. Electrical control system replaced with SIEMENS S7-1200 control system and control panel Control panel with renewed relays, compliant with 2023 standard SKF servo-controlled abrasive supply system: abrasive supply infinitely adjustable via control panel for 2-speed blasting operation Safety system with PILZ safety sensors and emergency stop circuit on the turbine housings The machine can be fully tested (empty without abrasive).

Condition: excellent (used), Functionality: fully functional, Year of construction: 1995, operating hours: 17,273 h, load capacity: 16,000 kg, lifting height: 3,100 mm, free lift: 1,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, fork width: 2,500 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Type: Duplex Lifting height: 3,100 mm Free lift: 1,500 mm Load capacity: 16,000 kg Load center: 1,200 mm Forks Dsb E U Sovrylle Rqout Length: 2,400 mm Width: 200 mm Thickness: 100 mm Fork carrier width: 2,500 mm Drive type Engine: Diesel Perkins MACHINE DETAILS Own weight: 23,300 kg Length: 5,400 mm Width: 2,650 mm Height: 3,050 mm Mast height: 3,150 mm Operating hours: 17,273 h Tires Type: pneumatic tires Size: 12.00-20 EQUIPMENT - Side shifter - Fork positioner: 1,100 mm - 2,350 mm - Heating

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: C7004367, Year of construction: 2019, operating hours: 1,706 h, load capacity: 3,800 kg, lifting height: 13,800 mm, arm reach: 8,600 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and engine Engine: diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: all-wheel steering Tires Tires (VR/VL, HR/HL): approx. 75% Type: off-road tires MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Own weight: 8,900 kg Operating hours: 1,706 h (as of January 20, 2025) Previous owner: first owner Visual condition: good Technical condition: good Dsb Ejvr Tdze U S Rqeut Place of use: inside, outside, Terrain Maintenance and inspections Last service: 11/2024 Last UVV inspection: 11/2024 UVV valid until: 11/2025 Condition: Without UVV-relevant defects EQUIPMENT - Tow bar - Heating - 4x4x4 drive - Kubota engine - Quick coupler - Level control - Supports - Merlo sideshift - All-wheel steering - Cab with heating

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 30, TECHNICAL DETAILS Dsb E U S Rjurudrsqeut Control: Heidenhain iTNC 426 X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 600 mm Tool holder: SK 40 Tool magazine: 30-fold EQUIPMENT - High-pressure filter system with IKZ - Chip tray - handwheel - run in oil only - Machine hood Can be picked up with normal semi-trailer

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,027 h, Functionality: fully functional, machine/vehicle number: 17289, travel distance X-axis: 330 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 10 °, swivel angle C-axis (max.): 360 °, Equipment: documentation/manual, 5-axis high-speed high-precision machining center + buffer station The machine has been tested and serviced (service report available) TECHNICAL DETAILS Travels: 330 x 300 x 250mm C-axes: 360° B-axes: -110 / +10° Spindle speed: max. 40,000 rpm Spindle to table distance: 250 mm Table dimensions Ø x H: 150 x 150 mm Table load: max. 20 kg Buffer station: WorkPal System 3R Dob E U S Rst H Nploqeut Control: L-Tech / Fanuc 30i Feed rate: 90,000 mm/min Tool holder storage: 30 pieces MACHINE DETAILS Connected load: 37 kVA Supply voltage: 415 V Weight: 5120 kg Dimensions: 3271 x 2007 x 2404 mm Footprint: 4475 x 2810 mm EQUIPMENT - New FSE high-performance scraper conveyor with FSE auto drum filter (purchased for € 13,000) - Automatic with clamp for C-axis - Integrated PLC - Documentation

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, paper weight (max.): 100,000 g/m², paper width (max.): 1,625 mm, paper height (max.): 200 mm, Reason for return: The printer has not printed for 50 hours. The business area has not grown as expected, so the printer has been standing more than it has been in operation. Condition: The print head has been flushed and all nozzles have been printed as a test image in the test print before flushing. A new head may be required for commissioning. No minimum price - guaranteed sale to the highest bid! TECHNICAL DETAILS Printing process: Piezo inkjet Print width: 1,625 mm Paper thickness/height: 0.01 to 200 mm Weight capacity of the print bed: 100 kg/m² Print bed size: 1,690 (W) x 3,066 mm (D) Print size: 1,604 (W) x 2,500 (L) x 200 mm (H) Ink cartridges Type: Roland ECO-UV EUV-5 Colors: Cyan, magenta, yellow, black, white, gloss, primer Ink type configurations: CMYKWhGlPr Vacuum system: 2 vacuum zones Deb E Uevfr H Ue S Rqsut Print resolution: max. 1,440 dpi Motion drive: High-resolution stepper motor Print accuracy: Error rate max. ±0.3 % of the distance traveled or ±0.3 mm (depending on the larger value) Repeat accuracy: ± 0.01 mm Output modes: Continuous, unload, back to origin, layered Media height adjustment: Manual or automatic sensor Surface control: Manual or automatic sensor Control: 7-inch color LCD touch screen Network: Ethernet base 10/100 MACHINE DETAILS Printer dimensions: 2,815 x 3,126 x 1,490 mm Control panel dimensions: 530 x 530 x 1,080 mm Weight: 800 + 50 kg Ambient conditions: 20 - 32 °C, 35 - 80 % humidity Power supply: 230 V, 16 A, 2P+E Power consumption: max. 2.65 kW in operation with vacuum Sound pressure level printing / stand-by: < 70 / 40 dB Transport dimensions: 3,500 x 2,000 x 1,776 mm Transport weight: 1,180 kg

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, Functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter: 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Dsb E Ujvrz E Hj S Rqjut Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Condition: excellent (used), Year of construction: 2005, operating hours: 18,436 h, Functionality: fully functional, travel distance X-axis: 885 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (min.): -10 °, swivel angle B-axis (max.): 110 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 885 mm Y-axis: 600 mm Z-axis: 600 mm Rotary axes: B-axis -10° to +110°, C-axis 360° Feed, dynamics and tool holder Maximum feed rate: 90 m/min Dsb E U S Rjvrxcpjqsut X-axis acceleration: up to 15 m/s² Y-axis acceleration: up to 12 m/s² Z-axis acceleration: up to 18 m/s² Tool holder: HSK-A63 Table and load NC rotary table diameter: 750 mm Maximum load: 600 kg Cooling lubricant system & chip conveyor Container capacity: 500 liters Coolant supply: 40 l/min at 2.3 bar Chip disposal: Efficient scraper belt conveyor (Discharge height 850 mm) MACHINE DETAILS Operating hours: 18,436 h Switch-on time: 46,702 h Rated power: 73 kVA Rated current: 105 A Operating voltage: 400 V Operating pressure: 6 bar Compressed air connection delivery rate: 30 Nm³/h Submitting a bid obliges you to collect the machine on time by February 19, 2025!

Condition: ready for operation (used), Functionality: fully functional, TECHNICAL DETAILS Spindle passage: 65 mm Turning length: 280 mm Spindle diameter in front bearing 85 mm Control: 840C Siemens Speed - main spindle: 6,300 rpm C-axis 0.001° Drive power: 13 / 21 kW Torque: 62 / 102 Nm Speed - counter spindle: 4,500 rpm Torque: 10 Nm Clamping diameter: 65 mm Clamping length: 38 mm Spindle bore: 15.5 mm Turret 1 Number of tool positions: 8 Shank cross-section: 25 x 48 Tool change time - tool: 0.2 s Travel distance - x: 90 mm Traverse path - z: 280 mm Feed force: 5.5 kN Rapid traverse: 24 m/min Driven tool positions: 8 Speed: 6,000 rpm Drive power: 3.3 kW Torque: 7.5 Nm Rear side machining of stationary tools: max. 5 Turret 2 Number of tool positions: 6 Travel distance - x: 81 mm Traverse path - z: 80 mm Feed force X/Z: 8.3 / 5.5 kN Rapid traverse X/Z: 16 / 24 m/min MACHINE DETAILS Djb E U Setuvtas Rqout Total power requirement: approx. 30 kW Machine weight: approx. 3.0 t Space requirement: approx. 7.0 x 3.0 x 2.5 m EQUIPMENT - Siemens 840 C control system - Loading magazine: Type IEMCA TAL/ AUTO65/38 - Two Revovler - Driven tool stations - Counter spindle on upper tool turret - 1x back boring unit - with impact unit - many accessories

Condition: ready for operation (used), Year of construction: 2001, operating hours: 50,162 h, Functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control Heidenhain TNC 430 x-travel: 600 mm y-path: 700 mm z-path: 600 mm NC swivel rotary table: 630x500 with pallet carrier Pallet changing device: 2-fold Pallet size: 2 x 630 x 500 mm Tool changing device: 60 places MACHINE DETAILS Switch-on time: 99,556 h Spindle hours: 55,162 h Dsb E U S Rjuhyyceqjut EQUIPMENT - Coolant system - Cooling: IKZ - Rotary pallet changer - Chip conveyor - Measuring probe - 2 vices - 2 interchangeable pallets

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 52332, grinding length: 1,000 mm, grinding width: 600 mm, grinding height: 620 mm, spindle speed (max.): 3,500 rpm, TECHNICAL DETAILS Working area: 1,000 x 600 x 620 mm Sanding length: 1,000 mm Magnetic surface: 1,000 x 600 mm Deb E U S Rot H Nn Ieqeut Sanding speed: 1450 - 3500 rpm MACHINE DETAILS Machine dimensions: 2,650 x 4,150 x 2,750 mm Weight: 8 tons Total connection: 28 kW Operating voltage: 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,246 h, Functionality: fully functional, turning length: 400 mm, turning diameter: 460 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Control system: Fanuc 32 iTB Turning length: 400 mm Turning diameter: 460 mm Swing diameter over slide: 460 mm Tool holder: direct Tool turret size: 12 positions Switch-on time: 12,246 h (counter reading) EQUIPMENT - Rear chip conveyor with double chain - Electronic handwheel - High-pressure coolant pump (6 bar 55 l/min) - High-pressure coolant pump (15 bar 55l/min) - 3-jaw power chuck in main spindle Duob E U Souf T Hke Rqjt - Hydraulic hollow clamping cylinder - Special gantry housing - GL6 - 2 axis CNC gantry loader with a capacity of 2 x 3 kg (travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets with 13 auto-centering holding bars each Can be collected with a normal semi-trailer

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: M-970504, travel distance X-axis: 2,500 mm, travel distance Y-axis: 935 mm, travel distance Z-axis: 900 mm, rotational speed (max.): 3,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: 2x Heidenhain Bed dimensions: 2900 x 800mm Rotatable table: 800 x 800mm Dob E U S Rst H Nmdsqeut Travel X / Y / Z: 2500 / 935 / 900 mm Rotatable milling head Spindle speed: 3000 rpm Tool holder: ISO 50 Tool places: 30 pieces MACHINE DETAILS Machine dimensions: 6500 x 3200 x 3500 mm Machine weight: 18500 kg EQUIPMENT - Accessories - Documents

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, TECHNICAL DETAILS Control: Fanuc 0T Duob Eotx Avwo U S Rqet Turning diameter: 650 mm Center distance: 1,320 mm Turning length: 1,220 mm C-axis: available Tool holder: 8 places Driven tool positions: 8 Spindle motor: 15 kW MACHINE DETAILS Machine dimensions: 4,400 x 2,400 x 2,500 mm Weight: 7,500 kg EQUIPMENT Chip conveyor Pallet tools Accessories 4-jaw chuck Jaws Tool holders Driven tool holders collets and more

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 516345H00408, Year of construction: 2017, operating hours: 6,660 h, load capacity: 2,500 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, fuel: electricity, Inspection valid until November 2024 TECHNICAL DETAILS Load capacity: 2500 kg Lifting height: 6050 mm Free lift: 2200 mm Mast type: Triplex Weight: 5054 kg Dimensions: 2400 x 1250 x 2750 mm Operating time: 6093 h EQUIPMENT - Non-marking tires - work light Dsb Ejtx Auae U S Rqout - Charger - 4. function up to the stop

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 106185, TECHNICAL DETAILS Working width: 25 - 260 mm Working height: 10 - 100 mm Working length: min. 180 Drive power of the S1 processing units: 10.5 kW Speed of the processing units: 0 - 18,000 rpm Tool interface of the processing units: HSK-F63 Tool changer, number of positions: 2 x 18 Tool diameter, non-nested: 100 mm Tool diameter, nested: 330 mm Tool flight circle (saw blade): 280 mm Tool length (from spindle nose): 290 mm Weight per change position: 8 kg Dueb E U S Retxz U Ssqjt Weight of the disk changer: 100 kg EQUIPMENT - Torque support - Angle heads - Automatic positioning axis for angle heads - C-axis - Positioning axis - Integrated chip conveyor belts - Machine housing - AlphaCAM CAD/CAM software - Network card