Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Functionality: limited functionality, center width: 2,985 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, quill diameter: 125 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working range Center width: 2,985 mm Swing diameter over bed: 830 mm Swing diameter over facing slide: 540 mm Travel of the cross slide: 450 mm Displacement of the top support: 250 mm Bed width: 520 mm Face slide width: 280 mm Bed slide guide length: 600 mm Turning tool cross-section: 32 x 32 mm Spindle diameter in the front bearing: 180 mm Spindle holder according to DIN 55027: size 11 Material passage: 130 mm Inner taper of the spindle: metr. 140 Main drive Three-phase motor, infinitely variable Drive power (50/100% ED): 50/37 kW Total speed range: 2 - 1,600 rpm Gear stage I: 2 - 225 rpm Gear stage II: 5 - 559 rpm Gear stage III: 7 - 900 rpm Gear stage IV: 18 - 1,600 rpm Max. Torque at the spindle: 8,750 Nm Speed control: 5 - 200% Load display up to: 125% Feed drive Three-phase servo drives with mechanical safety clutch Longitudinal feed force: 23,880 N Planar feed force: 11,300 N Dob Hceu Hi H Sjiadekl Rapid traverse speed longitudinal/plane: 6.8 / 4 m/min Thread cutting range Longitudinal and taper threads, pitch: 0.001 - 500 mm Tailstock Quill diameter: 125 mm Quill stroke: 200 mm Inner taper: MK 6 Tool equipment Multifix quick-change tool holder: size D Coolant system Pressure: 3 bar Delivery rate: 40 l/min Machine dimensions Length/width/height: 5,200 x 2,110 x 1,915 mm Machine weight Machine as transport unit: approx. 6,500 kg The FX7002 filter visible in the pictures is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 0672/1, table diameter: 590 mm, wheel diameter: 650 mm, milling length: 250 mm, table bore: 140 mm, TECHNICAL DETAILS Number of spindles: 1 Control: conventional Djbova Hf Ue Hciadskl Maximum wheel diameter: 650 mm Cutter length: 250 mm Height: max. 500 mm Module: max. 10 Worktable diameter: 590 mm Table bore: 140 mm Minimum distance between milling cutter and table center: 50 mm ACCESSORIES - Complete set of change gears - Suction device

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 013352, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,000 mm, table length: 3,220 mm, table load: 3,000 kg, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS x-path: 2,500 mm y-path: 1,000 mm z-path: 750 mm Table surface: 3,220 x 1,000 mm Workpiece weight: approx. 3,000 kg CNC control: HEIDENHAIN TNC 426 Spindle holder ISO: 50 Milling spindle speeds: 20 - 5,000 rpm Tool changer: 30-fold Dsbsvdagyj Hciadjkl Feed speed: 1 - 30,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Total power requirement: 40 kW Space requirement: approx. 6.9 x 4.1 x 3.7 m Machine weight: approx. 21 t EQUIPMENT - RENISHAW measuring probe - Coolant unit with IKZ and chip conveyor - Various tool holders

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Dkeb Hceuc Szzjiadel

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 1-120314-2-1-5, sheet thickness (max.): 6 mm, sheet width: 2,000 mm, TECHNICAL DETAILS Sheet width: 2,000 mm Sheet thickness: max. 6 mm Control: SPS Dsb Hjt Tdrhjciadekl Operating voltage: 400 V / 50 Hz Connected load: 7.5 kW EQUIPMENT - Motorized back gauge - chisel foot tool

Condition: refurbished (used), Year of construction: 1983, Functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 380 mm, spindle diameter: 130 mm, spindle speed (max.): 900 rpm, travel distance W-axis: 800 mm, Retrofit in 2013! TECHNICAL DETAILS Spindle diameter: 130 mm Dob Hcsvwb Rgsiadekl X-axis travel: 8,000 mm Y-axis travel: 2,000 mm W-axis (spindle longitudinal): 800 mm Z-axis travel: 380 mm Number of spindle speeds: max. 900 rpm Drill spindle feed: 900 mm Feed: 5 - 2,000 mm/min Tool holder: SK50 Total power requirement: 40 kW Machine weight: 42.2 t

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) Dkob Hciaetuu Dpjdol - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 1,250 mm, saw blade diameter: 500 mm, length stop: 3,200 mm, worktable length: 3,700 mm, TECHNICAL DETAILS Engine power: 13.59 HP / 10.0 kW Max. cutting height: 200 mm Max. cutting width: 1,250 mm Crosscut stop: 3,200 mm Dsb Hciajvrzbbjdskl Format sliding table: 3,700 mm Max. circular saw blade diameter: 250 - 500 mm Circular saw table extension: up to 1,620 mm EQUIPMENT - Parallel stop: Yes, with digital display - LASER cutting line display: available - On and off switch: on the sliding table - Preventive Contact System (PCS®): available - Potential-free contact: for controlling extraction systems

Condition: excellent (used), Year of construction: 2005, operating hours: 37,065 h, Functionality: fully functional, machine/vehicle number: 11520000043, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 0.001° Speed range: 8,000 rpm Control system: Siemens 840D powerline + Shopmill Gear stages: 2 Tool holder: HSK 100 Tool positions: 270 / 360 Number of pallets: 2 Pallet size: 800 x 800 mm MACHINE DETAILS Dimensions: approx. 4.4 x 3.2 x 3.3 m Weight: approx. 18 tons Operating hours: 37,065 h Switch-on time: 99,223 h EQUIPMENT - Electronic handwheel - Operating mode: 4 - Oil mist extraction - Internal cooling (IKZ): 40 bar - Paper band filter - Measuring probe: Renishaw OMP 60 - Chip flushing gun Deb Hotrxl Djciadekl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,926 h, Functionality: fully functional, machine/vehicle number: 15405042144, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece length (max.): 790 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, rotational speed (max.): 14,000 rpm, TECHNICAL DETAILS CNC control: Siemens 840D X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Feed speeds: 20 m/min Rapid traverse: 30 m/min Axis acceleration: 5 m/s² Work table Number of pallets: 1 Pallet dimensions: 560 x 790 mm Distance between spindle nose and table surface: 720 mm Max. Workpiece weight: 600 kg Spindle Max. Spindle speed: 14,000 rpm Spindle drive power: 18.5 / 15 kW (40% ED / cont) Spindle torque: 100 / 74 Nm Tool system Tool holder: SK40 Number of tools in the magazine: 30 Deb Hceunrvqeiadjkl Tool diameter with free adjacent positions: 130 mm Tool diameter with occupied neighboring slots: 80 mm Max. Tool length: 300 mm Chip-to-chip time: 6 s MACHINE DETAILS Total power requirement: 35 kVA Length: 2,275 mm Width: 3,288 mm Height: 2,670 mm Hours under power: 22,597 h Spindle hours: 15,926 h

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, roll diameter: 500 mm, belt width: 62 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Conveyor technology from the manufacturer Overbeck & Baving: a total of 400 m roller conveyor and 100 m belt or ascending conveyor are available. The height of all system stands can be variably adjusted. The entire system has always been under maintenance contract and is therefore in very good condition. All documents from the manufacturers for the system are available. All controls and sensors are available. The bidding obliges to binding collection in the period: 09.09.24 - 13.09.24 between 8 - 16 o'clock. TECHNICAL DETAILS Inside track dimension: 82 cm Outer track dimension: 92 cm Roller diameter: 500 mm Height: 80 cm Belt width: 62 cm Belt conveyor track width: 72 cm Number of 90° curves: 10 pieces Number of 45° curves: 2 pieces Conveyor belt element length: mostly 1.9 - 2.9 m Operating voltage: 3/PEN, 50 Hz, 400/230 V ± 5 % Control voltages: 24 V DC Shipping possible throughout Europe for an additional charge. Dkob Hcieucuvbsadel

Condition: ready for operation (used), Functionality: fully functional, turning diameter: 420 mm, turning diameter over bed slide: 432 mm, center width: 2,032 mm, TECHNICAL DETAILS Djb Hciajvwb Ncodskl Max. turning diameter (over bed): 432 mm Max. turning diameter (over support): 420 mm Center distance: 2,032 mm Control system: Haas

Condition: excellent (used), Year of construction: 2021, operating hours: 505 h, Functionality: fully functional, machine/vehicle number: DW126K - 42, The multitool - breaking, crushing, feeding, dosing, cutting, bag opening, dissolving HIGHLIGHTS - Universal single-shaft shredder for smaller volume flows and special batches - Flexibly adaptable and unrivaled versatility - BROADEST APPLICATION SPECTRUM IN ITS CLASS - Hydraulic direct drive for on-demand performance and interference-resistant operation - Economical and ecological diesel engine - Robust, durable components - Low operating costs - The entire shredding system can be changed directly on site in just 45 minutes - Bolt-on tools for quick tool replacement using the patented Dopp-Lock® system - HydraulicDirect Drive for demand-oriented performance and highly interference-resistant operation - smart handling throughout - impressive simplicity in design, maintenance and operation TECHNICAL DETAILS Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 hp) Emission standard: Stage V Tank capacity: 300 l Roller Diameter: 600 mm (L) Speed: 33 rpm Number of teeth: 8 Feed hopper Loading height: 3,124 mm Rear conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: Adjustable from 1 m/s to 4 m/s MACHINE DETAILS Total weight: 16,300 kg Chassis: crawler chassis, 2 speeds, 400mm 3-web Working position Length: 11,293 mm Width: 2,545 mm Height: 4,184 mm Transport dimensions Length: 7,820 mm Width: 2,545 mm Height: 3,231 mm Deb Hcisvgwbysadskl EQUIPMENT - Electro-hydraulic pump, for operation when the engine is at a standstill - Auxiliary hydraulics 70 l/min - Size L shredding package - Overbelt magnet - Large radio remote control - Maintenance-friendly engine compartment with LED light - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange - Quick roller change system on the roller - Quick-change roller system on the machine

Condition: good (used), Year of construction: 2021, operating hours: 1,176 h, Functionality: fully functional, machine/vehicle number: 00583/0421/226923, High precision, compact, rigid, high performance, with direct drive, for production Machine already professionally dismantled and no longer under power. TECHNICAL DETAILS - (according to manufacturer's brochure) Spindle orientation: vertical Structure: with mobile table, columns Number of tools: 40 tools Area of application: for cutting X-stroke: 820 mm Y-stroke: 510 mm Z-stroke: 510 mm Rotation speed: 10,000 rpm Dkeb Hciajtx Uvcedsl Power: 14.3 kW Advance speed X-axis: 24,000 mm/min Y-axis advance speed: 24,000 mm/min Advance speed Z-axis: 24,000 mm/min Maximum table load: 500 kg Tool weight (max.): 7 kg Positioning accuracy: 0.01 mm Repeatability: 0.003 mm MACHINE DETAILS Total weight: 5,800 kg Total width: 4,390 mm Total height: 2,900 mm Operating hours: 1176 h (as of November/December) EQUIPMENT Chip conveyor

Condition: excellent (used), Year of construction: 2018, operating hours: 15,569 h, Functionality: fully functional, drill diameter: 11 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 DSL / 27-300 / Sinamics, slide length: 400 mm, Bidders are obliged to collect the machine by the deadline at the beginning of August. The machine can be shipped within Germany. Shipping price on request! Operating hours: 13,237 h (as of 25.07.2023) Dobsum T Ewj Hciadekl TECHNICAL DETAILS Possible cycle time: 6 s Station 1: Loading Station 2: Alignment and clamping Station 3: Drilling unit SP125/45 Station 3 Drilling diameter: 10.8 mm Tool holder: HSK 50 (IKZ) Carriage width / length: 250 / 400 mm Stroke: 250 mm Station 4: Milling unit SP 63/20 Station 4 face milling diameter: 3.18 mm (2x in succession) Tool holder: HSK 32 Z-stroke - slide dimension / stroke: 320 x 630 mm / 250 mm Y-stroke - slide dimension / stroke: 320 x 400 mm / 120 mm X-stroke - slide dimension / stroke: 580 x 360 mm / 120 mm Station 5: Turning unit SP 200/70 Station 5 Grooving diameter: 12.9 mm (IKZ) Slide dimension: 250 x 400 mm Stroke: 250 mm Station 6: Drilling unit SP 125/45 Station 6 Drilling diameter: 6.35 and 11.1 mm Tool holder: HSK50 (IKZ) Carriage dimensions: 250 x 400 mm Stroke: 250 mm Station 7: Drilling unit SP 125/45 Station 7 Countersink diameter: 11.15 mm Tool holder: HSK50 (IKZ) Slide dimensions: 464 x 800 mm Stroke: 400 mm Station 8: Unloading Control: Siemens Sinumerik 840 DSL / 27-300 / Sinamics Positioning rotary indexing table: Hirth face gearing EQUIPMENT Coolant supply 25 bar (paper band filter) Chip conveyor Loading and unloading belts Extensive documentation

Year of construction: 2007, operating hours: 18,204 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 200038, TECHNICAL DETAILS X-axis travel: 730 mm Dkeb Holu E Icociadol Y-axis travel: 730 mm Z-axis travel: 740 mm B-axis: 360º B-axis step size: 0.001º CNC control: Mazatrol MATRIX NEXUS spindle speed: 18.000 rpm spindle drive power: 30 / 25 kW spindle torque: 259 / 191 Nm rapid traverse: 60 m/min number of pallets: 2 pallet dimensions: 500 x 500 mm workpiece diameter: 800 mm workpiece height: 1.000 mm workpiece weight: 700 kg tool holder: SK-40 number of tools: 60 tool diameter: - with free neighbor places: 150 mm - with occupied neighbor places: 95 mm tool length: max. 420 mm tool weight: 12 kg MACHINE DETAILS hours under power: 80.452 h Spindle working time: 18.203 h Total power consumption: 65.7 kVA weight: 11.6 t Coolant supply through the spindle: 15 bar Tank capacity: 510 l EQUIPMENT - Equipment - Chip conveyor - signal lamp - High pressure pump - Work area light - Spindle active cooling unit

Year of construction: 2018, Condition: like new (used), Functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side Dksb Hcisnfvymeadjl - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 1110 000026 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Working surface: 1,000 x 800 mm System: DMG Heidenhain Mill Plus Rotating table (4th axis): available X-travel: 1,250 mm Y-travel: 880 mm Z-travel: 800 mm Spindle Spindle mount: SK50 Max. spindle speed: 8,000 rpm Spindle motor power: 28 kW Dsb Hjvwb Husciadokl Pallet changer Number of pallets: 2 pieces Pallet size: 1,000 x 800 mm Tool magazine Number of tools: 120 pieces

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Siemens 840D Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank Dksbju Nhc Ro Hciadjl

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, total width: 31,900 mm, TECHNICAL DETAILS Sheet width: 3,190 mm Sheet thickness: 6.3 mm Stand width: 3,200 mm Stop depth: 5 - 1,000 mm Stroke rate: 30 - 50 1/min Cutting angle: 1.2° Control system: RAS System 2005 Dkeb Hcot Ahl Reiadjl Space requirement: approx. 3.83 x 3.82 m EQUIPMENT - Small parts diverter - Automatic cutting gap adjustment - Scrap separation - Return-to-sender - Cutting technology: oscillating cut - Documentation

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,300 h, Functionality: fully functional, machine/vehicle number: W09268227L2D380007, Mobile shredding plant as a semi-trailer chassis HIGHLIGHTS - SMART HOPPER - Extended feed range and automatic adjustment of the material feed to the performance of the shredding system. - VARIODIRECT DRIVE - The newly developed and patented VarioDirect Drive ensures stepless and variable power transmission directly to the shredding drum. - MULTI TOOL CONCEPT - Use of the shredding tools with the Dopp-Lock® system from the other slow-speed machines in sizes M and L, including the new limiter generation. - INNOVATIVE HOUSING CONCEPT - All doors open upwards for optimum accessibility. The GRP doors with their large air intakes ensure optimum ventilation and also reduce noise emissions. - EASY ACCESS CONCEPT - The comb flap, which opens up to 90°, makes it much easier to access the entire shredding chamber. This increases occupational safety and availability, even after service work. TECHNICAL DETAILS Area of application: Waste wood processing, mixed construction site waste, commercial waste Main areas of application due to roller size: Green waste / waste wood / waste / roots Drive type: Diesel Roller drum length: 2,200 mm Roller diameter: 600 mm Roller speed: 2 - 28 rpm Number of teeth/comb teeth: 20 / 14 Tooth height: 174 mm Lower belt dimensions: 0.8 x 2.9 m Underbelt speed: 1.3 - 2.9 m/s Rear belt dimensions: 1.0 x 4.9 m Tail conveyor speed: 1.25 x 3.0 m/s Discharge height: 3,162 mm Loading height: 3,390 mm MACHINE DETAILS Permissible total mass: 27 t Tare weight: 18 t Transport dimensions: 7673 x 2530 x 3604 mm Dkobetu Tv Uo Hciadel Maximum working dimensions: 11.5 x 2.5 x 6.6 m Track width: 2090 mm Collision protection: 2500 mm Maximum driving speed: 80 km/h Engine: MTU-DM 6R1000 Daimler OM 936 Rated power: 260 kW Emission standard: EuroMot V Displacement: 7,700 cm³ Tank size: 500 l EQUIPMENT - 2-axle semi-trailer chassis unit - Neodymium overband magnet - Irrigation - Size L shredding system

Year of construction: 2006, operating hours: 44,825 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1167000036, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) Dkjb Hciolu Ex Rjadol CNC control: SIEMENS 840D Powerline ShopMill Classic number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 6,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel distance - x: 1,000 mm Travel - y: 850 mm Travel - z: 750 mm Spindle speed: 35 - 6,000 rpm Number of places in the tool changer: 60 Table dimensions - longitudinal: 630 x 630 mm Control: FANUC16i EQUIPMENT - with IKZ - chip conveyor. - NC rotary table 360,000 x 0.001° Debsuf Tprj Hciadskl

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,354 h, Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,170 mm, number of slots in tool magazine: 84, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 MACHINE DETAILS Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Spindle hours: 14,354 h Switch-on time: 70,794 h EQUIPMENT - with palletizing system and robot handling Deb Hciajuf Tlgodjkl

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 710 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel distance - x: 140 mm Travel - z: 710 mm Control: Siemens C 200-4 Main spindle speed: 5,000 rpm Passage diameter: 65 mm Number of slots in the tool changer: 2 x 12 slots MACHINE DETAILS Dkjb Hciaouf Tdpodel Rated power: 47 kW Operating voltage: 400 V, 50 Hz Mass of cabinet: 610 kg Machine mass: 6550 kg EQUIPMENT - 2 turrets - Tailstock - Bar loader: Index MBL 65 - Passive tool holder