Second-hand machinery for sale (2,399)

Condition: good (used), Year of construction: 2012, Functionality: fully functional, turning length: 160 mm, turning diameter: 140 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Control system: Mitsubishi Main spindle: with hydraulic brake and C axis Machining diameter: max. 140 mm (chuck) / 42 mm (bar) Workpiece length: max. 160 mm Spindle clearance for bar machining: 42 mm Collet size: 173 E/ Dshxet Sd Tcs Dfamjut Spindle speed: max. 6,000 rpm Main drive power: 7.5 KW /11kW Travel X / Y / Z: 225 / 385 / 235 mm Travel Z1: 350 / 460 mm Rapid traverse in all axes: 20 m/min Driven tools: 11 tools, main spindle side Collet size: ER 20 Axial tools: 7 pieces Radial tools: 4 pieces Fixed tools: 16 pieces Shank size for external machining: 8 pieces / 20 x 20 mm Shank diameter for internal machining: 8 pieces / 25 mm MACHINE DETAILS Dimensions L X W X H: 3000 x 2100 x 1800 mm Weight: approx. 4,000 kg EQUIPMENT - Collets: Main spindle 20 pieces each Main spindle / counter spindle 20 pieces. - Drilling quills - Chip conveyor - Parts conveyor belt - Signal lamp

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: P16-5426-001, CONSTRUCTION - Degreasing zone - Finish zone - Filter system - Eurosorb circuit with mixer (powder container) - Electrical system with control panel - Pneumatics TECHNICAL DETAILS Material to be cleaned: sheet steel belts, perforated, various hole patterns Duehx Dfaetwn Nmsmot Dimensions of the material / belt width: max. 1,250 mm Sheet thickness: 0.5 - 5 mm Cleaning speed: max. 10 m/min Degree of oiling: lightly oiled (< 0.5 g/m²) Coil surface: cold-rolled, clean Coils endless: Coil to coil is joined on the customer side without thickening MACHINE DETAILS Dimensions: approx. 3,300 x 2,000 x 2,000 mm (without filter and electrical engineering, without conveyor technology) Compressed air: > 6 bar dry and de-oiled, approx. 11 m³/min Power: 400 V / 50 Hz; ~20kW Screed: Concrete for 10 N/mm² Flatness: on target circle 5.0 m ± 5 mm Noise level: ≤ 80 dB(A)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Make: PASO Machine type: HSC milling machine Year of manufacture: 2004 Condition: Very good (last used for milling graphite electrodes, incl. dust extraction and filter system) Control system Type: Heidenhain iTNC 530 Manual control unit: Heidenhain HR 410 Operating terminal: Rollbar Working area X-axis: 700 mm Y-axis: 440 mm Z-axis: 400 mm Drive system System: Indramat Milling spindle Type: IMT HSK 32 Power: 9 kW Speed: max. 24,000 rpm Converter Type: S&M 21.80 Recooler Type: Chilly 25 Tool changer Type: Drum Capacity: 16-fold Cooling system System: Minimum spray cooling system (Indutec) Number of nozzles: 1 Coolant volume: 1 l Dividing head Dushx Dsu R S Hiofamot Manufacturer: Wittenstein Type: Alpha TP10 Suction unit Type: Volume extraction with suction cup OTHER The machine can be inspected under power. Last used for milling graphite electrodes, incl. dust extraction and filter system Control system and all air hoses were replaced in 2022 for over €10,000 (invoice available)

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Gleason Pfauter G320 CNC generating grinding machine + Promot Automation handling unit Functionality and machine features Generating grinding machine with 8 numerically controlled axes for machining gears with straight and helical teeth that can be produced by generating, including a dressable worm profile wheel. Linear and rotary main axes are hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. TECHNICAL DETAILS Control: Siemens 840 incl. control panel Module: 0.5-7.0 Workpiece diameter: 10 - 380 mm Number of teeth: 10 - 600 Vertical slide stroke Z: 200 mm Horizontal slide stroke X: 230 mm Tangential slide stroke Y: 135 mm Swivel angle of clamping head A: ± 45° Stroke - tailstock center: 125 mm Tangential slide stroke - dressing V: 180 mm radial slide stroke - dressing U: 110 mm C-axis (table rotation): 360° rapid traverse speed - linear axes: 10,000 mm/min Rotation speed: 3,000 rpm (infinitely variable) Table rotation speed: 240 rpm Dehxetu T S Uj Dfamout Table resolution: 0.001° Processing feeds: stepless Working feeds: infinitely variable Grinding wheel diameter: 270 - 350 mm Grinding wheel width: 104 mm Grinding wheel bore: 160 mm MACHINE DETAILS Machine weight: 11,500 kg Machine space requirement: approx. 3.7 x 2.4 x 2.75 m Promot Automation space requirement: approx. 4.5 x 1.6 x 4.0 m EQUIPMENT - Promot automation - Conveyor belt - Cooling belt system - Hydraulic unit - Complete documentation

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, pressing force: 800 t, travel distance X-axis: 700 mm, travel distance Z-axis: 2,900 mm, stroke distance: 665 mm, travel distance R-axis: 250 mm, surfacing fence length: 8,200 mm, TECHNICAL DETAILS Pressure: 2 x 400 t Bending length: 2 x 4100 mm X-axis travel: 700 mm R-axis travel: 250 mm Z-axis travel: 2900 mm Stroke: 665 mm Projection: 400 mm Installation height: 850 mm Clearance between the uprights: 3600 mm MACHINE DETAILS Total output 30 kW Weight 76,000 kg Equipment/accessories: - Operator terminal with 15" TFT-LCD flat screen, network card, Windows XP and MMC-Bybend software - Tilt adapter and double articulated arm for control system - Pressure reference for automatic compensation of side stand deflection - Dynamic hydraulic crowning of the lower beam, DNC-controlled - Automatic dynamic press pressure control - Material thickness measurement - Tool overload protection - Temperature monitoring - Stainless steel scale on the upper beam Dushevi I Ntjx Dfamet - AKAS laser system, manually adjustable in height - Electrically monitored side safety guards - Rear safety guard with sliding door - Integrated hour and stroke counter - Linear guide on the lower beam with 2 parking spaces of 250 mm each - Double guide on the upper beam - 2 x manually adjustable front support arms made of steel, length 1000 mm - slim table T5, height 145 mm - punch holder type "R" mechanical - 2-axis back gauge with X and R - Inclination adapter for operator terminal

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,945 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control system: Siemens 840D SlimeLine Travel X / Y / Z: 800 / 560 / 510 mm Speed range: 12,000 rpm Tool holder: SK40 Clamping surface: 1100 x 560 mm Table load: max. 800 kg Tool changer: 30 magazine positions MACHINE DETAILS Switch-on time: 15,856 h Spindle hours: 4,945 h EQUIPMENT - Chip conveyor - IKZ Dshx Dfaot Ur Srsmsut - Paper belt filter - Documentation

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 74005, Description of the basic machine - Horizontal end machining center for simultaneous end machining on both sides of shaft-shaped parts - Cutting to length, centering, drilling, cross drilling, chamfering, slot milling, etc. TECHNICAL DETAILS Control: Siemens Sinumerik 840D SL Workpiece diameter: max. 60 mm Workpiece length: 500 mm Horizontal stroke: 200 mm Duehjt Hkp Tex Dfamet Transverse stroke: 200 mm Tool carrier system left/right: fixed motor spindle / 6-position crown turret MACHINE DETAILS Total mass: 16 t Voltage: 3x400V 50 Hz Connected load: 74 kW

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 15914, TECHNICAL DETAILS Pressing force: 630 kN Installation height: max. 600 mm ram stroke: max. 400 mm throat depth: 280 mm Table height: 850 mm Dushx Dfetwpggoamot Table width: 630 mm Table depth: 500 mm Overtravel: 20 mm Overtravel time: 90 ms Safety distance: 180 mm MACHINE DETAILS Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil volume: 285 l Weight: 6000 kg Idle noise: 69.2 dB Drive power: 22 + 4 kW

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: Siemens, controller model: 840D, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X / Y / Z: 450 / 270 / 310 mm Drilling capacity in St 60: 16 mm (indexable insert drill) Thread cutting Milling capacity in St 60: M12, 60 cm³/min Speed range: 20 - 15,000 rpm Control: SIEMENS 840D Spindle power at 100%/25% ED: 2.2 / 7.2 kW Torque: 23 Nm Duehet R R A Ijx Dfamst Rapid traverse X,Y / Z: 40 / 60 m/min Workpiece changing device: 0 / 180° Clamping surface: 2 x 550 x 300 mm Thread and fitting hole grid: M16 x Ø 15H7 x 50 mm Load weight: max. 200 kg per side Weight difference: max. 50 kg between both sides Workpiece changeover time: approx. 2.0 s Tool places: 24 pieces Tool taper: HSK A 40 DIN 69893 Tool diameter: max. 50 mm Tool diameter with free adjacent positions: max. 100 mm Tool length: max. 160 mm Tool weight: max. 1.2 kg Tool change time: 0.8 s (depending on control system) Chip-to-chip time: approx. 2.2 s (depending on control) MACHINE DETAILS Operating voltage: 400 / 230 V, 50 Hz/N/PE Compressed air: 6 bar ±1 bar Ambient temperature: max. 40° EQUIPMENT - Moving column machine with workpiece changing device Guides with long-term grease lubrication - Digital main drive with spindle with sealing air supply - Tool clamping monitoring - Automatic tool changer with robust, fully encapsulated pick-up chain magazine, with mechanical collision protection as well as, Cone cleaning via blast air - Look Ahead with dynamic pilot control, Bellshape acceleration ramp, software limit switch, access authorization via key switch for tool corrections, NC program changes and machine parameters - CHIRON Powersafe software package for the targeted switch-off of installed consumers - Definable time for variable "warm-up" program - Thermocontrol - Thermodrive - Operating hours and piece counter on screen - 230 V socket - Socket for portable mini handwheel - Splash guard cover - Switch cabinet cooler - Oil-free maintenance unit - Installation elements - Flushing gun - Extraction connection Extraction Ø 150 - Machine preparation for IKZ - CHIRON tool life monitoring - Chip conveyor (scraper belt) - Fixture flushing - 4th + 5th NC axis, ready to plug in - Documentation Floor vehicle on site / electrician for dismantling can be provided by the seller for an additional charge.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Commissioning took place in 2009 TECHNICAL DETAILS Model: MFP L 260 - 75 Control: Siemens 840D Sinumerik Table clamping surface X / Z: 2202 / 352 mm Longitudinal stroke: 2600 mm Transverse stroke sanding support: 650 mm Distance spindle to table: 806 mm Head design: fixed, not adjustable Grinding wheel dimension: Ø400 x 160 mm Grinding wheel bore: 127 mm Peripheral speed of grinding wheel: 35 / 50 m/s Stroke speed longitudinal / transverse / vertical: 30 / 5 / 5 m/min Resolution: 0.001 mm MACHINE DETAILS Machine weight: 21 t Space requirement: 7.06 x 2.7 x 3.26 m Drive power of grinding wheel: 75 kW Total connected load: 113 kVA Knoll coolant cleaning system Dimensions: 5.6 x 2.4 x 3 m Knoll coolant cleaning system Weight: 2,000 kg EQUIPMENT - Handwheel included Dohx Dettazfofameut - Complete documentation Purchase price of the machine was € 1,450,000

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Duehx Dfasvi I Aysmot Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: 1540503266A, TECHNICAL DETAILS X axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Control: Heidenaihn İTNC 530 Number of tools: 30 Tool holder: SK 40 Dujhx Dfajng Amvomot MACHINE DETAILS on request EQUIPMENT Direct path measuring system X,Y,Z Measuring probe Heidenhain TS640 Spindle conveyor Operating mode 4

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2009, No minimum price - guaranteed sale at the highest bid! The system is a modular system and can therefore be quickly dismantled and reassembled. TECHNICAL DETAILS Duehx Dfou Rc Nnoamjt Storage components Ring-pan mixer: 1 m³ Pre-silo: 4.5 m³ Gravel silo: 2 pieces, 6 components each Cement silo: 2 pieces, 3 chambers each Chemical scale: Finke with 3 chambers Software and maintenance Software: Version from 2022, updated to the latest operating system Base plates: Renewed in 2023 Mixer Type: Forced action mixer Model: Huggler Capacity: 1 m³ hardened concrete Gravel silo 1 Components: 4 Capacity K1: 20 m³ Capacity K2: 32 m³ Capacity K3: 32 m³ Capacity K4: 20 m³ Gravel silo 2 Components: 2 Capacity K5: 20 m³ Capacity K6: 20 m³ Cement silo 1 Type: 2-part silo Cement 1 capacity: 20 t Cement 2 capacity: 40 t Cement silo 2 Type: 1-piece silo Cement 3 capacity: 60 t Admixture Admixture weigher: Finke Number of chambers: 3 Chamber capacity: 6 components, conveying system by pump Year of construction Gravel silo 1 and cement silo 1: 2009 Gravel silo 2 and cement silo 2: 2013 Other Heating: Gravel silos equipped with electric heating Pre-silo: 4 m³ hardened concrete Control system: PC control system, conversion in 2022 Floor sealing plates: Renewed in 2023 Plant: Compact construction site plant with plug connections

Year of construction: 2003, operating hours: 4,689 h, Condition: reconditioned (used), Functionality: fully functional, 2023 comprehensively overhauled: - Spring assembly spindle renewed - Rotating union renewed - trackball renewed - Life support battery renewed - Graphic card regenerated - X-axis bearing new - backlash X-/Y-axis 0,015mm TECHNICAL DETAILS X travel: 1270 mm Y travel: 660 mm Z travel: 610 mm speed: max. 8.000 rpm table load: max. 1300 kg table size: 1500x660 mm tool changer: 24-fold/double arm tool holder: SK 40 DIN69871 Control: Ultimax 4 control MACHINE DETAILS spindle hours: 4.689 h, machine ran only 1 shift drive: 15 kW machine weight: approx. 9 t space requirement: approx. 4,8 x 4,5 x 2,95 m EQUIPMENT - Coolant system - Cooling through the spindle (IKZ) 20bar - chip conveyor - machine light - 2x color screens (working) - Removable electronic handwheel SOFTWARE - Pocket milling with islands - Synchronous tapping without compensating chuck - DXF software Dujhx Dol D Rubsfamot - 3D contouring software - Ultinet - Advanced Velocity Control - Plunge Ramp/Helix

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Dushx Dfevi Iw Roamst Working area: 3,000 x 1,500 mm Control system: Siemens MACHINE DETAILS Machine weight: approx. 17,500 kg EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price - guaranteed sale at the highest bid! Dushx Dfajuxr Txsmot TECHNICAL DATA Travel X x Y: 3,000 x 1,500 mm

Condition: reconditioned (used), Year of construction: 1990, Functionality: fully functional, Conversion 2009: Dshx Dfajvc Axvomout - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,004 h, Functionality: fully functional, laser power: 3,200 W, laser hours: 31,442 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, table height: 220 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,200 W Table height: 2,200 mm Control system: Siemens MACHINE DETAILS Machine dimensions: 9,300 x 4,600 x 2,200 mm Machine weight: approx. 12,000 kg Dohjvc At Hjx Dfameut Laser switch-on time: 31,442 h Laser cutting time: 17,004 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,707 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 12 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Laser power: 4,000 W X-axis travel: 2,520 mm Y-axis travel: 1,550 mm Z-axis travel: 300 mm Max. Sheet thickness: approx. 12 mm Table load: 330 kg MACHINE DETAILS Total operating hours: 39,777 h Operating hours: 15,707 h Cutting time: 8,326 h Machine weight: approx. 7,700 kg Djhx Dfsvc Ankeamsut EQUIPMENT - AF400i-D control system - cooler - Extraction unit - transformer - Light barrier

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, pressing force: 130 t, throat depth: 3,000 mm, distance between stands: 2,700 mm, stroke distance: 200 mm, TECHNICAL DETAILS Pressure: max. 130 t Folding length: max. 3,000 mm Distance between the uprights: max. 2,700 mm Duehx Dfaeu S Rcpjmst Stroke: max. 200 mm Total power requirement: 7.5 kW Control system: Amada OP 2000 Controlled axes: y1, y2, x1, x2, z1, z2, r Recording: Amada-Promecam EQUIPMENT - Lasersafe Fissler for increased safety - 2-hand foot switch

Condition: excellent (used), Year of construction: 2013, operating hours: 4,173 h, Functionality: fully functional, turning length: 455 mm, turning diameter: 250 mm, rotational speed (max.): 3,000 rpm, swing diameter over bed slide: 450 mm, bar passage: 65 mm, TECHNICAL DETAILS Control: FANUC Swing diameter: max. 450 mm Swing diameter over turret: max. 375 mm Turning diameter: max. 250 mm Turning length: max. 455 mm Travel X: max. 190 mm Travel Z: max. 480 mm Rod diameter: max. 65 mm Spindle and tool Speed: max. 3,000 rpm 3-jaw chuck 12-position turret: VDI 30 C-axis: integrated Driven tools: available MACHINE DETAILS Operating hours: 4,173 h Machine weight: 3,800 kg EQUIPMENT - Tool measurement in the machine - Tailstock Duohx Dou S Rbxofamot - Chip conveyor - Coolant device - Parts catcher

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, total height: 4,460 mm, load capacity per storage section: 15 kg, payload: 45,000 kg, TECHNICAL DETAILS Dushxsu S N Rlj Dfamet General information Number of storage locations: 15 pieces System height: 4,460 mm System length: 1,500 mm System width: 3,000 mm Payload: max. 45 t

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, pressing force: 220 t, bending length: 3,000 mm, stroke distance: 180 mm, TECHNICAL DETAILS Pressure: max. 220 t Folding length: max. 3,000 mm Stroke: max. 180 mm Control: Delem DA 58 Controlled axes: y1, y2, x, r, z1, z2 Tool holder: Amada-Promecam MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 12,000 kg Dimensions: 3,660 × 2,380 × 2,800 mm Dehx Dfaeu S N Htomout EQUIPMENT - Safety doors behind the machine - 2-hand foot switch

Condition: good (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, swivel angle A-axis (min.): -110 °, swivel angle A-axis (max.): 90 °, Hedelius 5-axis machining center TECHNICAL DETAILS Control: CNC Heidenhain iTNC 530 X-path: max. 1,200 mm Y-path: max. 650 mm Z-travel: max. 520 mm Traverse path rotary swivel range in X: max. 500 mm Fixed machine table travel range in X: max. 570 mm A-axis: +90° / -110° C-axis: 360° Tables Swivel rotary table dimensions: 520 × 420 mm Interfering edge diameter: max. 610 mm Fixed table dimensions: 700 × 600 mm Spindle and tool Dujheu Sqtqsx Dfamot Spindle holder: SK 40 Speed: 30 - 8,000 rpm Drive power: 22 kW Tool changer: 30-fold MACHINE DETAILS Machine weight: approx. 8,500 kg Dimensions: 3,600 × 2,650 × 2,800 mm EQUIPMENT - NC rotary swivel table on the right - Fixed table on the left - Electric handwheel - IKZ (20 bar) - Chip conveyor

Condition: excellent (used), Year of construction: 2015, operating hours: 3,500 h, Functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 12,000 rpm, swivel angle A-axis (min.): -42 °, swivel angle A-axis (max.): 120 °, 5-axis universal machining center TECHNICAL DETAILS Control: CNC Heidenhain ITNC 530 X-path: max. 960 mm Y-path: max. 600 mm Z-path: max. 480 mm A-axis: 120° / -42° C-axis: 360° Table Table dimensions: 560 × 365 mm Table load: max. 200 kg Spindle and tool Spindle speed: max. 12,000 rpm Cone holder: BBT 40 mm Spindle / table distance: 100-580 mm Tool length: max. 300 mm Tool weight: max. 7 kg Cooling and measuring technology Coolant: Coolant through spindle (CTS) Tool probe: Renishaw Oil cooler: integrated MACHINE DETAILS Operating hours: approx. 9,000 switch-on hours, approx. 3,500 spindle hours Machine weight: approx. 7,000 kg Dshx Dfeu Sqr Tsamjut Space requirement: approx. 3,100 × 2,200 × 3,070 mm EQUIPMENT - IKZ (internal cooling) - Electric handwheel - Chip conveyor - Direct measuring system