Foldable big box with 4 access flaps

AUER Klappbare Bigbox 120x80x100 cm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h Cgsdpfxsyhflto Anwst • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Year of construction: 2021, condition: excellent (used), Tomra Optical sorter model 1000 halo. Cgjdpfx Ajuixp Eonwjt For high performance sort/grading. top and bottom sensors with rejection. Can work on various veg and fruit products.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Cjdpfx Aolz Rvlenwjgt Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Scrow 32 Csdpfx Anouh U Izjwogt Spray weighted 123g

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Cgjdpfxjrg Hh Ns Anwst Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. Cgodpoftm Hrjfx Anwjt *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, SprayClean Front Loading Spray Washing Machines Cjdpfx Aj T D R Donwegt SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, functionality: fully functional, Year of construction: 2026, total length: 3,000 mm, total height: 2,000 mm, warranty duration: 12 months, I offer a robotic 3D printer with an extruder from the manufacturer Cead and CNC control Siemens Sinumerik One - a solution for large-format printing of molds, design elements, boats, molds for lamination and much more. The machine is made in the Czech Republic and is offered including integration at the customer's site and training. Main features: Printing system: Extruder CEAD E25 (up to 12kg/h) or S25 (up to 24kg/h) - selection according to customer requirements Robotic arm: COMAU N-170 with a reach of 3 meters and a load capacity of 160 kg Control system: Siemens SINUMERIK ONE - full CNC control, the possibility of debugging the technology using override. Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Cgedpfx Anjwgkqtewot Optional accessories: Heated print bed to optimize adhesion and print quality Note: Software and print bed are not included in the standard offer, they can be supplied as optional accessories. The price listed is with the basic Cead E25 extruder

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Cjdpfexwy Utjx Anwjgt terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Csdpfewzwu Iox Anwjgt Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual