Crushing equipment

Babbitless 2350

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Iedpfxjwp Rqfo Abgeia The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), 926 USED Shop, confectionery, shelf, electric oven. Iodpfx Absuiwvkogsia 2-chamber oven for 60x40 sheets, has a shelf for sheets. TECHNICAL DATA - number of baking chambers: 2 - each chamber is equipped with a steam option, - equipped with: proofer, shelf for sheets and hood. EXTERNAL DIMENSIONS (in cm) - Width: 97 cm - Length: 100 cm - Height: 190 cm (with hood: 216 cm) CHMABER DIMENSIONS (in cm) - 60 x 47 x 16 cm (for 1 60 x 40 cm baking tray) The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg Iisdpfxsibqraj Abgja * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: like new (used), “Hazemag Universa 1620” for Sale Isdoggflvopfx Abgsia Manufacturer: Hazemag Type: Universa 1620 Rotor size: 1.600 x 2.000 mm Inlet size: 2.500 x 2.000 mm

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg Isdpfxob Nulhs Abgeia 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: used, mileage: 159,620 km, Year of construction: 2006, operating hours: 28,594 h, Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Iiodpjylgxvofx Abgea Lifting capacity: 45.000 kg Identification Serial number: 53304 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 16348 h Counterweight: 0 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 380,000 km, power: 478 kW (649.90 HP), first registration: 02/2011, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 700 l, color: red, driver cabin: sleeper cab, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: cruise control, = Additional options and equipment = - Refrigerator - Radio/CD player - Sleeper cab - Toolbox Ijdpfxeuu Hfgj Abgoia = Notes = - Large fuel tank, 700L - AdBlue tank, 95L - 24-volt electrical system - JOST JSK 38C-1 - 3.5" fifth wheel coupling - Fifth wheel coupling on sliding frame - PTO hydraulic system - Heavy-duty Rockinger RO56 coupling at the rear - Front sliding coupling - Work lights - Toolbox = Further information = Transmission Transmission: Mercedes Powershift Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Suspension: air suspension Rear axle 2: Tire size: 315/65R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: leaf spring Rear axle 3: Tire size: 315/65R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: leaf spring Weights Payload: 250,000 kg Gross vehicle weight: 41,000 kg Functional Body brand: Mercedes-Benz Condition Technical condition: very good Visual condition: very good Damages: none Financial information Price: On request

Condition: used, mileage: 835,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Iedpfx Abor Uzgcjgeia Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: new, Year of construction: 2024, Operating massive working pieces? Then this CNC laser machine would be the ideal option. The Wattsan 2030 Flat Bed is a laser cutter designed to work with large materials. There is no need for extra preparation; go right to work! This CNC laser machine has a table size of 2000x3000 mm. It also includes a trash collecting container, which will make the job much more enjoyable. Wattsan 2030 can cut materials such as cloth, plywood, cardboard, rubber, acrylic, plexiglass, and wood. You can give our managers a call for additional details! Wattsan 2030 Flat Bed characteristics Working area: 2000x3000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2400 x 3750 x 800 mm Packing size: 3860 x 2540 x 1020 mm Weight: 1075 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Iiedpfsry Uf Ajx Abgea YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm Iiedpjlhrufefx Abgea weight: approx. 13 t.