Electronic module

Bachmann Battenfeld CPPV 200 S B 7621/00

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Gjdpfow R Dg Ujx Aa Asbk

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Gedpfxoduyyzs Aa Ajbk

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Closing 60 TO Year 1997 Scrow 30 mm Gsdpfx Ajg Emvhsa Ajbk Injection weight approx. 90 g

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Gjdpfx Aaoi Dfids Aebk Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Gbedpouh U Izjfx Aa Aek Year 1992 Scrow 32 Spray weighted 123g

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. Gbjdpfx Ajq Tr T Rsa Aek – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: Gsdpoh Nu Iuofx Aa Ajbk ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: new, Year of construction: 2026, Our belt haul-off can be built in different sizes. 40-80 m/min Contact length 170mm to 800mm Godpfxehd Ndxo Aa Aebk MADE in GERMANY

Year of construction: 2003, condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Gbodpfx Aajmrri Ds Aok

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Gbjdpfx Aaeiidm Tj Ask Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel