Tipper

Beco Super 450

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Cgjdpfxsrvgyxs Aftsp Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. Codexcgy Hjpfx Aftegp The exact remaining work required is not known.

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Cgodpfx Afoud H H Uotjp Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10520, USED YANMAR CRAWLER DUMPER C/W NEW RUBBER TRACK Cedpfeyiabvjx Aftegp MODEL : C30R SERIAL : 10520

Condition: used, LINDE Electric Forklift Type E25L-01 Serial No. H2X387D01930 Year of Manufacture 2013 Load Capacity 2500 kg Lift Height 4700 mm Fork Length 1600 mm Fork Carriage Width 1150 mm Overall Height 2200 mm Operating Voltage 80 Volts - Triplex clear-view mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carriage for attachments - HOPPECKE Type 5HPZS 575 battery pack, 80 Volt 575 AH with EUW (new battery from 2019) - INDATRON Type D automatic charger, 80 Volt / 80 Ampere with EUW - 4-wheel super-elastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Driver's cabin with Heating - Hydraulic auxiliary steering - 2 LED work lights at the front - 1 LED work light at the rear - 1 LED BlueSpott at the rear - 15,995 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,500 mm Overall width: 1,150 mm Weight: approx. 4,700 kg Cjdpfx Afjd Rmx Nstegp Good condition

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 Cgjdpfjwh I Sdjx Aftsp SCHORR tracked dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - 500 kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR tracked dumper RR500DHKAS features a hydraulic tipping drive and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAS is its hydraulically controlled bucket. With the help of the so-called "self-loader," you no longer need a separate shovel. Thanks to its slim design (740 mm), the mini dumper can even drive through narrow paths and narrow doorways. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dumper/box is effortless and requires little effort thanks to the hydraulic tipping drive, even when fully loaded. Another advantage of the wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a robust dumper made of thick sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded dumpers are completely emptied without you having to manually assist. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer's type designation: RR500 - Model: DHKAS - Load capacity: 500 kg - Tilt drive: Hydraulic (infinitely variable) - Drive: Chain - Weight without/with packaging: 353 / 373 kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Power: 9.2 hp - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward gear: max. 8 km/h - Reverse gear: max. 5 km/h Basic dimensions: - Total length of platform folded: 2350 mm - Total length of platform unfolded: 2550 mm - Total width (including bucket): 740 mm - Total height: 1050 mm - Container dimensions (internal dimensions): 740 x 665 x 435mm - Container dimensions (external dimensions): 1060 x 710 x 520mm - Track width: 710mm - Loading volume (liquid): ~ 200L - Loading volume (heaped): up to 370L (depending on load) - Drive chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH BUCKET The mini dumper relieves you of the arduous burden of having to move heavy wheelbarrows by hand. The attached, hydraulically controlled bucket also helps with this. SMOOTH-RUNNING AND ROBUST The mini dumper features a robust 6-speed transmission with two reverse gears. The dumper also features four eyelets for secure attachment during transport. We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.

Condition: excellent (used), Machine type: Drilling and milling machine Year of manufacture: 2014 Drilling capacity in steel: approx. Ø 50 mm Thread cutting capacity: M26 Spindle speed: 32 - 2340 rpm Tool holder: MK ISO 40 (DIN2080) Quill stroke: 145 mm X-axis travel: 585 mm Y-axis travel: 240 mm Table clamping surface: 800 x 250 mm Table swivel range: +/-45° Table rotation range: +/-45° Weight: approx. 800 kg Codpfx Aeyc Hgueftjgp Dimensions (W x D x H): approx. 1500 x 1380 x 2250 mm Condition: very good Accessories: Various, according to drawers, see pictures

Condition: used, empty load weight: 2,350 kg, maximum load weight: 6,150 kg, overall weight: 8,500 kg, axle configuration: 2 axles, first registration: 09/1983, loading space length: 4,450 mm, loading space width: 2,180 mm, loading space height: 500 mm, suspension: steel, tire size: 340/65R18, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, 2-axle, BPW axles, tandem, leaf suspension, U-protection, front support, swinging flaps Body: 3-sided tipper trailer, steel drop sides swinging and foldable, corner stanchions plugged in, various drive-on ramps available for an extra charge of 800.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cgsdpfx Aji Rlkfjftjp - .

Condition: used, Year of construction: 2018, operating hours: 2,682 h, Equipment: ABS, all wheel drive, JCB 406 T4 WHEEL ROADER Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2018 ? BETRIEBSSTD. 2 682 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Codjxzxxfopfx Aftjgp * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: good (used), functionality: fully functional, Planing width 60 cm, thickness approx. 20 cm, wedge-shaped cutterhead with 2 knives, two rollers under the table, segmented feed roller and pressure beam, chip ejection. Csdpfsykmz Ujx Aftsgp