Stock of 36,000 Organic Cosmetics

Biocosmetica Stock Prodotti

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including Bdjdoiyyf Iopfx Akxjb die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Bodpfxed Tiu Ee Akxsdb Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Bsdpfx Aeitcvuskxedb Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts Bodpfxjlxzl Ej Akxjdb - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) Bsdpfx Aeib H Ddskxedb - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Bdsdpfoitcu Esx Akxob Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. Bedof Dc D Hopfx Akxedb 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: used, Year of construction: 2007, System: Mobile sludge dewatering system, mobile decanter/centrifuge Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP51 Mach. no.: H3991 Year of manufacture: 2007 Maximum drum speed: 3400 l/min Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other: Steel exchange case with reinforced base, Bdjdpfevz Dnpsx Akxjb Accessories: Pump for sludge inlet, flocculant suction pump, flocculant solution pump Flocculant station: 2 chamber system for liquid polymers with agitator, adjustable Double shaft paddle mixer: galvanized steel Total weight: approx. 4200 kg Purchase and rental possible.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Bdsdpfx Aox Sx R Sskxeb Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, color: white, total length: 1,600 mm, total width: 1,250 mm, total height: 2,000 mm, The EnergyCore EC-50&100 energy storage (50 kW, 100 kWh) is an all-in-one solution ideal for industry, RES farms and data centers. It offers high efficiency, safety and reliable energy management with an advanced Production plants Thanks to its ability to respond quickly to fluctuations in energy demand, production plants can avoid costly downtime. It increases power reliability and enables more efficient use of renewable energy. Industrial companies The EnergyCore EC-50&100 energy storage supports power supply stability in large industrial plants, reduces energy costs during peak periods and increases operational efficiency. Ideal for managing excess energy and supporting production processes. Bodpfxevtg Eue Akxsdb Data centers Provides reliable power supply during power outages, which is critical for the continuity of data center operations. The energy storage acts as a support for the UPS, providing additional protection against failures and power stability under high loads. Photovoltaic and wind power systems The EnergyCore EC-50&100 enables the efficient storage of excess energy generated by renewable sources such as photovoltaic and wind power systems. It maximizes self-consumption, minimizes energy losses and promotes sustainable resource management. INNOVATIVE APPROACH Mobile app for Proton energy storage Modern Proton energy storage - maximum efficiency and long service life Energy storage from Proton is based on the innovative LiFePO4 technology, which enables high current efficiency and an extremely long service life with several thousand charge and discharge cycles. LiFePO4 batteries have a high energy density, so that large amounts of energy can be stored in the smallest of spaces. In addition, these cells have a low self-discharge rate and are immune to the "memory effect" that occurs with older battery types such as Ni-Cd, Ni-MH or AGM We have been in business since 2007 (over 17 years) Under what conditions can our energy storage units be operated? Single-family homes Restaurants Hotels Office spaces Farms Server rooms Public facilities Production facilities Universities and technical colleges Anywhere where constant access to electricity is required - The customer service office is available on weekdays from 8 a.m. to 4 p.m. - The service department is available 24 hours a day (24/5) for our customers. If you have any questions or problems that require a quick response, the best way to contact us is by phone.