Folder gluer

Bobst Mistral 110

Condition: good (used), Offer includes: Heidelberg cylinder press, OHZ SBG, manufactured circa 1963, converted for die-cutting. Fgsdsz N Sv Eopfx Am Eei

Condition: excellent (used), Year of construction: 2008, ManRoland 705 3B LV HiPrint Year: 2008 Maximum sheet size: 740 × 1040 mm Minimum sheet size: approx. 340 × 480 mm Maximum printing area: approx. 730 × 1020 mm Thickness: 0.04-1.0 mm Maximum speed: 16,000 sheets/hour Fgjdpfxozzk U So Am Eji Roland feeder Double diameter impression cylinder, Automatic material thickness setting, Automatic device for washing rubber blankets and stretching blankets, PPL - automatic plate changing system, RCI, Automatic device for washing ink units, Roland Deltamatic dampening system, Ceramic humidification duct, Quick Change Coating, Seccomatic IR/TL, ColorPilot, Kersten deionization system, Dust and dirt extraction device, Technotrans Beta.d, Grafix Cantronic.

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Fedpfxoy Sf Uke Am Eegi Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Fedet H Nhhepfx Am Esgi Delivery time: 6-8 months

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section Fgsdpfx Ajzlqzgom Eei - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading Fgjdpfx Aey H Hgdsm Eoi - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Year of construction: 2013, condition: reconditioned (used), We have a KAS C4 compact envelope inserting system, year 2013, available.The total counter is just 629.426 envelopes in its lifetime!!! This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Configuration: - Single sheet feeder - Folding feeder in-line - 2 insert feeders (bottom feed) Fgodpfskvpbpsx Am Eji - Envelope section - Conveyor belt We sell this machine after complete maintenance

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request Fgsdpfxeyz Adns Am Eei _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Fgodpfx Amoyuztgo Eoi Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidelberg Suprasetter A74/52 Automatic plate loader (100 plates) Year of manufacture: 2007 Laser hours: 3,587 Exposed plates: 79,573 Max plate size: 676 x 760 mm Bacher punching system Fedpfjx Upc Rjx Am Esgi Excellent condition Stacker advand 26